Product Introduction:
Large Angle conveyor belt is made of baseband, guard and diaphragm plate. The flange
can prevent material sprinkling effectively. Gear edge is designed into corrugated, in order to help material round drum more convenience; And diaphragm plate is used for retainer
materials. To realize the large angle conveying, the type is T model TC. Gear side and diaphragm plate is connected by secondary cure and baseband , so it has the very high
bonding strength.
Advantages:
1, increase the conveying Angle (30 ~ 90 degree);
2, cover smaller area, less investment;
3, bigger throughput, higher hoisting height;
4, smooth transition from horizontal to tilt (or vertical);
5, It is suitable for conveying easy sifted the powder, granulated and small lump, paste and liquid the shape material;
6, lower energy consumption, simple structure, higher strength, adhesive tape, longer
service life;
Specifications:
1.high efficiency
2.stuff with large obliquities
3.largest angle is ninety degree
4.low maintain cost
5.easy operation
Application:
Applying for large angle transporting, the maximum angle is 90°.
1. To save time
Because of large angle transporting, thus can be shortened the horizontal length and save the space of laying area.
2. Strong transporting capacity
Compared with common conveyor belt, with large carrying cross section, has stronger
transporting capacity than same width conveyor belt.
3. Without sidewall plate
Because without sidewall plate, thus avoid the local abrasion.
4. Impossible to use small roller
Impossible to use the traditional size of small roller.
5. Because the baseband uses special canvas core to improve the canvas, then
improve the anti-broken ability of belt at the same time.
6. The sidewall plate and diaphragm are adhesive with baseband through heat
vulcanization method, thus ensure the bonding strength
Specification of
the clapboard | Height of the
clapboard | Amplitude | Pitch of
waves | Width of the
motherboard | Square number
per meter | Related
clapboard | Model of the
clapboard | Width of the
Clapboard | Square number
per meter |
S | 40 | 42 | 41 | 60 | 0.45 | 30 | T | 30 | 0.45 |
S | 60 | 42 | 41 | 60 | 0.85 | 50 | CT | 55 | 0.85 |
S | 80 | 42 | 41 | 60 | 1.03 | 75 | CT | 75 | 1.03 |
S | 100 | 42 | 41 | 60 | 1.34 | 90 | CT/T | 100 | 1.36 |
S | 120 | 42 | 41 | 60 | 1.69 | 110 | CT/T | 100 | 1.70 |
S | 160 | 60 | 60/63 | 80 | 2.44 | T150/140 | CT | 140 | 3.2 |
S | 200 | 60 | 60/63 | 80 | 3.38 | 180 | CT | 160 | 3.5 |
S | 240 | 70 | 55 | 80 | 4.75 | 220 | CT | 170 | 5.2 |
S | 300 | 80 | 75 | 90 | 7.03 | 280/260 | CT | 170 | 7.05 |
S | 400 | 90 | 80 | 95 | 10.8 | 360 | CT | 180 | 14.5 |
Conveyor belt with thernal-vucanization combined rib and variety of physical properties indicators:
Serial NO | Inspection item | Counting unit | Standard | Actual inspction result |
1 | Covering rubber longitudinal strength | Mpa | >=18 | 21.2 |
2 | Covering plastic tensile elongation | % | >=400 | 463 |
3 | Coverage of plastic wear | cm3/1.61km | <=.08 | 0.52 |
4 | Covering compound hardness(Shore A) | DU | 55-65 | 63 |
5 | Cotton canvas inlay adhesion strength | kn/m | 3.20 | 5.2 |
6 | Covering rubber and cloth level strength | kn/m | 2.70 | 4.3 |
We are focus on PVC/PU belt and others related series products. We have professional factories that operated many years. Our products has been sold all around the world, and is welcomed by our users. Our products conform to EU&US rules.
All the products can be customized!
Here' S our products list
1. PVC food belt
2. Silicone baking mat
3. PET film
4. Treadmill belt
5. Transimission belt and pulley
6. PVA water soluable film
7. Yoga sheet
8. Modular chain belt
9. Nylon flat belt
10. Wool belt
CONTACT:
Shijiazhuang LiChi Machinery Leasing Co, . Ltd
Mob: 0086 13603210980