Company History
Founded in 1999, Suzhou Eagle Electric Vehicle Manufacturing Co., Ltd. is a leading manufacturer specializing in designing and manufacturing 4-wheel electric vehicles. Our company has a workshop area of 30,000 square meters and 400 workers. Our current daily production capacity is 100units per day, this can be adjusted with the order volume increasing.
Our company has gotten the unique production license for electric vehicle by the Supervision Bureau of Quality and Technology of China. In 2003, we were approved by ISO9001. In 2006, we were approved by WMI quality system to get our own VIN.
With effective management and specialized talents, our company is dedicated to offering top quality products with competitive price and first class after-sales service.
Why EV?
There should be at least three reasons for EV:
Firstly, decrease pollution! EV as a zero-emission-car can help improve the environment a lot;
secondly, decrease the cost! Though the initial buy cost of EV is higher than gasoline car, the maintenance cost of EV will be extremely lower than gasoline car. Based on calculation, for a 48V EV, it only consumes 2KWH electricity per 100kms. Cost is much lower than gasoline car.
Thirdly, energy independent! For a country that is lack of oil source, it should find a way to make it independent from oil. Water resource, sun resource and wind resource are potential alternative resource; the problem is to find a medium to storage the energy. Then battery will be the best choice at this moment.
Key Components
Item | Description |
| Controller | Curtis controller, 275A-400A, imported from USA directly |
| Motor |
Rated power 4KW-5KW (5.4HP-6.8HP), Chinese brand or ADC brand |
Battery | Trojan battery, T105+, imported from USA directly |
| Charger |
High frequency onboard charger
(input 90V-265V, 47-63HZ, output 48V/22A) |
Performance
Item | Description |
| Passenger Capacity | 2 |
Range (loaded) (km)* |
up to 90 |
| Max.speed (km/h) | up to 40 |
| Min.turning radius (m) | 4 |
| Max.climbing ability(loaded) | up to 25% |
| Max. movement after brake at speed of 20km/h | ≤4m |
| Max.loading weight (kgs) | 530 |
| Charging time (hour) | 8-10 |
| Battery lifespan (cycles) | 750 |
* 1) based on the test conditions: 20km/h speed, flat and straight concrete road, wind speed less than 5m/s, temperature of 25 Celsius degree;
2) Range will vary depending on temperature, grade, payload and driving style.
Dimensions
Item | Description |
| Overall dimensions (mm) | 3750x1400x1810 (LxWxH) |
| Min.ground clearance (mm) | 140 |
| Wheelbase (mm) | 2450 |
| Front wheel tread (mm) | 1160 |
| Rear wheel tread (mm) | 1150 |
Body and Frame
Item | Description |
| Frame & Chassis | Welded steel framework with sand blasting and painting |
| Body | FRP and Plastic |
| Roof | FRP with steel frame, with roof handle |
| Windshield | Laminated glass with wiper |
| Roof supports | Steel |
| Seat | Reborn sponge with artificial leather, high back, with formed armrest |
| Rear cargo box | Steel, rear fender foldable, with hydraulic lifting function |
| Floor | Bamboo floor with Skidproof leather |
| Dashboard | FRP, with F/R switch, emergency light switch, digital meter, combination switch, storage box (2), etc.. |
| Side rear view mirror | 2pcs |
Electric System
Item | Description |
| Lights |
12V, headlight, front turning light, taillight (brake light and rear turing light) |
Horn | Electric horn, 12V |
| Reverse buzzer | Electric, 12V |
| Combination switch | including switch for headlight, turning light, wiper and horn |
| DC/DC converter |
48V/12V |
Digital Meter | with Current meter, voltometer, speedometer, odometer and various indicators |
| Audio system | Radio with MP3 receiver and 2 waterproof speaker |
Steering & suspersion
Item | Description |
| Steering System |
Single-stage rack and pinion steering system,
with automatic compensation function |
Brake System | 4-wheel hydraulic drum brake with hand park brake |
| Accelerator | Resistance type, stepless speed change |
| Front suspension | Independent suspension |
| Rear suspension | integrated rear end, steel plate spring suspension, cylinder hydraulic vibration absorber |
| Driving mode | Rear axle two stage deceleration, motor direct driving |
| Rear axle | Integrated, steel differential case, 12.49:1 gear ratio |
| Wheel & Tyre | 20.5x8.0-10 tire, 6J-10 steel wheel, wheel cap |
Founded in 1999, Suzhou Eagle Electric Vehicle Manufacturing Co., Ltd. is a leading manufacturer specializing in designing and manufacturing 4-wheel electric vehicles. Our company has a workshop area of 30, 000 square meters and 400 workers. Our current daily production capacity is 100units per day, this can be adjusted with the order volume increasing.
Our company has gotten the unique production license for electric vehicle by the Supervision Bureau of Quality and Technology of China. In 2003, we were approved by ISO9001. In 2006, we were approved by WMI quality system to get our own VIN.
With effective management and specialized talents, our company is dedicated to offering top quality products with competitive price and first class after-sales service.
Our main products include:
1) Electric golf car (2- person, 4-person, 6-person):
EG2028K, EG2048K, EG2068K, EG2026K, EG2046K, EG2066K
2) Electric utility car (2-person, 4-person, 6-person):
EG2028KSF, EG2028KSZ, EG2028H, EG2028T,
EG2048KSF, EG2048KSZ, EG2048HCX, EG2048H, EG2048T, EG2068KSZ
EG2026KSF, EG2026KSZ, EG2026H, EG2046KSF, EG2046KSZ, EG2046HCX, EG2046H
3) Electric personal carrier (4-person):
EG6043K, EG6043P
4) Shuttle personnel carrier (8-person, 11-person, 14-person):
EG6088K, EG6118KA, EG6118KB, EG6158K
5) Electric bus train:
EG6158K with TRAILER
EG6118KB with TRAILER
6) Electric vehicle with solar panel:
EG2028KSZ, EG6158K
7) Sports utility vehicle:
- 2WD: EG2020ASZ, EG2040ASZ, EG2020T
- 4WD: EG6020A4D
- 5 SPEEDS: EG6042A
8) Electric industrial vehicle:
- Electric industrial vehicle:
- 800kgs: EG6021H, EG6021HA1; EG6021H with TRAILER;
- 1500kgs: EG6030H, EG6030HB1
- 2000kgs: EG6040HB1
- Electric scissor lifter: EG6060J
9) Electric ambulance cart (light-duty, heavy-duty):
EG2028KB1, EG6083T
10) Electric garbage-collecting vehicle with dumper or without dumper:
EG6020X, EG6062T
11) Street-legal EEC-approved electric vehicle for EU market:
EG6043KR-00, EG6043KR-01
12) Various customized vehicle (dinner delivery vehicle, utility vehicle, etc. ),
Made based on our standard vehicles or based on OEM design.
- Dinner delivery: EG6042KXC
- Cargo-container vehicle: EG6062KXC, EG6083T
- Cargo-bed vehicle: EG6062KCX, EG6042KDX,
EG6113T (front seat + long cargo bed)
- Passenger and cargo-bed vehicle:
EG6083T with 4 seats and cargo-bed
- Electric wheelchair vehicle: EG2068T
