High Density Polyethylene granules
1.granule
2.CAS No.9002-88-4
3.Hot sale,factory price
4.Free sample
1. Specification
HDPE cable material Property | Typical Value |
Mass density g/cm 3 | 0.941-0.959 |
Melt flow Rate(190 centidegree /2.16kg)g/10min | ≤1.0 |
Tensile yield strength MPa | ≥19.0 |
Flexural modulus Mpa | ≥965 |
Elongation@ break % | ≥400 |
Impact Embrittlement temperature centidegree | MAX -118 |
Dielectric Constant | 100KHZ | 2.32 |
1MHZ | 2.31 |
Loss Tangent | 100KHZ | MAX 0.0001 |
1MHZ | MAX 0.0001 |
Volume resistivity OHM-CM | MIN 1x10 15 |
2. Products properties
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 °C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
3. Application:
Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating
4. Storage:
Shelf life: It should avoid damp, contaminated and direct sun light during transport.And should be stored in ventilated and dry place. Do not put it with flammable and corrosive substances together,and away from the fire.
Our company supplys different kinds of products. High quality and favaroble price. We're pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.