Nitrogen Gas Flow Meter (CX-TMFM)

Main features of Thermal Mass Flow Meter
1.It can conveniently and accurately measure gas-flow rate without temperature and pressure compensation, from which users can get gas mass flow or standard volume flow.
2.Large ratio of measuring range. It can measure gas with velocity of flow from 100Nm/s to 0.5Nm/s, and be used in gas leak hunting.
3.Good anti-seismic performance and long useful life. The converter doesn't contain movable part and pressure sense part, so that the measuring accuracy will not be influenced by shaking.
4.Easy installation and maintenance. If possible, on line installations and maintenance are allowed. (See Safety Notice)
5.Digital design. The meter utilizes digital circuit measurement to assure accurate result and convenient maintenance.
6.Factory automation and integration can be achieved by using RS-485 or HART communication.
 
Main parameters

Measuring medium	All kinds of gases (excluding acetylene)
Range of caliber	DN10~4000mm	DN25~2000mm
Converter material	Stainless steel	Stainless steel, carbon steel
Working pressure	Medium pressure<=2.5 Mpa	Medium pressure<=4.0 Mpa
Range of velocity of flow	0.5~100Nm/s
Order of accuracy	±1%
Working temperature	Sensor: ambient temperature-10~+200C high temperature modification-10~+350C Converter: -10~+45C
Power supply source	All-in-one machine(DC24V or AC220V<=18W) Spilt type converter (AC220V<=19W)
Response speed	1S
Output signal	4~20mA(photoelectric isolation with top load of 500Ω) RS-485(photoelectric isolation), HART protocal
Pipeline material	carbon steel, stainless steel, plastics,etc.
Display	All-in-one type: four lines with LCD
Contents of display	Gas mass flow, standard condition volume flow, accumulated flow, standard time, accumulated running time, temperature of media, standard flow rate etc.
Protection	IP67