GSM / IP Dual Network Alarm Host -Controlled Alarm Kit

Key Features:

GSM / IP dual network alarm host -controlled alarm kit

Dual-network portfolio : IP / GSM dual network alarm , ensure that the first time to grasp the police intelligence , timely safety ;

IP monitoring: one million pixel HD , H.264, head turning , mobile remote monitoring and control, on-site video storage, support 4G, 8G, 16G, 32G storage TF card , support for two-way conversation , support network cable and WIFI;

burglar alarm : 20 wireless zones , three groups of alarm numbers , GSM SMS alarm , IP network alarms, site alarm , remote control, mobile phone APP, SMS, etc. control cloth , disarm operation ;

alarm linkage video : Alarm IP network automatically push police intelligence and open network video surveillance and storage ;

electrical control : Mobile APP remote control , 3-way electrical independent control , each can learn more connected with an intelligent control plugBlock , site manually force the switch ;


IP Camera Alarm System Adaptor

I,Product Type

          "Alarm In Sound And Flash" "Alarm In Sound And
Flash + Electrical Equipment Control"


II,Characteristic

1. Available for all IP cameras, which have alarm
    signal input port and can start video recording;
2. Remote arm/disarm, compatible with wireless
    sensors, easy to use;
3. Preload max 20 wireless sensors;
4. Alarm in sound and flash, at the same time, it will
    output alarm signal to activate IP camera;
5. Type of alarm signal: NO/NC, or pulse signal;
6. Can output control signal to control electrical
    equipment;


III,Parameters

Product Type	Alarm with sound and flash	Alarm with sound and flash + Electrical equipment control
Featured Function	IP camera alarm system adaptor	IP camera alarm system adaptor, can control one equipment
Power Supply	100~240VAC  50/60Hz
Working Current	Standby current: <25ma    Alarm current: <250MA
Alarm Volume	> 95db
Wireless Frequency	433M / 868M
Arm Type	Arm with sound,arm without sound
Arm Delay	15s
Alarm Signal Output	(NO/NC,impulse signal)is optional; Normal Mode: NO,NC
Output	NO/NC control, max 60s in max load
Wireless Learning	Max 20pcs wireless sensors

IV,Wiring Introduction

1. Alarm Signal Cable Connection: Connect 2 cores signal cable of IP camera adaptor with "alarm signal input port";

Note:
*Please confirm input alarm signal type of IP camera is same to output alarm signal type; if they aren't    same, system can't work, even system will be broken;

2. Power Source Cable Connection: firstly, plug power cable of IP camera into socket of IP network adaptor; then, plug power cable of IP network adaptor into socket of IP camera; finally, connect power adaptor to power supply;

3. Signal Control Cable Connection: Cut GND wire in the power cable of electrical equipment, then separately connect rest 2 wires in power cable of electrical equipment with 2 wires Signal Control Cable;

Note:
*"Electrical Control Equipment" type has this function, this connection can control L line in power cable;