Low Electric Power Consumption Plate Ice Machinery From Guangzhou

Plate Ice Machine

Large plate ice machine working theory: 

When the large plate ice machine begins operating normally, the water in the tank below is pumped from the cold water tank to the cold water sprinkler, and then evenly sprinkled on the surface of the evaporator. Through the cycle working of the refrigerant, some water is created into plate ice, while the water which does not become ice returns to the cold water tank below and waits for the next water cycle. After a period of time the water cycle and refrigeration stops and the water and overheating refrigerants gas begin a heat exchange with the plate ice at the same time. The plate ice then loses adhesive force and the ice drops into the ice crushing gadget due to gravity. After the ice is off the water temperature becomes low and it returns into the water sink waiting the next cycle.
 
Part 1. About Plate Ice Machine

1. Energy saving is by more than 30%. 
2. Daily capacity can be from 1ton to 50tons.
3. Ice thickness around 6mm to 8mm, it is adjustable.
4. Easy to operate: PLC programmable monitor, no need manpower
 
Part 2. Plate Ice Machine Different Model:

Model	Output	Compressor Power	Water Pump Power	Water Consumption	Outer Dimension(mm)	Net Weight
	Ton/24h	KW	KW	L/H	L*W*H	Kg
HYF10	1	2.51	0.4	42	1900*1370 *1665	660
HYF15	1.5	3.93	0.4	63	1900*1470* 1700	730
HYF20	2	5	0.75	83	1900*1550* 1700	750
HYF25	2.5	5.25	0.75	104	1900*1650*1700	890
HYF30	3	7.5	0.75	125	1900*1770*1800	1100
HYF40	4	11	0.75	167	2500*1800*2000	1500
HYF50	5	15	1.1	208	2500*1850* 2100	1900
HYF60	6	18.75	1.1	250	2500*1890*2100	2100
HYF80	8	22.5	1.5	333	2500*1920*2100	2500
HYF100	10	30	2.2	417	2500* 2100*2530	3100
HYF120	12	37.5	2.2	500	2500 2200*2300	3320
HYF150	15	43	3.7	625	2500* 2200*2480	3500
HYF200	20	59	3.7	833	3470* 2200*2480	4700
HYF250	25	73	3.7	1042	5100* 2200* 2480	4900

 Note:
The above information is according to adopt water cooled condenser.
Size of machine is before installation.
 It didn't mention size of cooling tower, cooling tower usually install in the outside.
 
Machine running condition: water temperature: 23Centi degrees, evaporate temperature:-12Centi degrees, condensing temperature 40Centi degrees, reference valve under 50Hz power supply. Real production of machine will have a little change according to change of water temperature and ambient temperature.
 
Part 3. Customers:

We have customer in China, Malaysia, Indonesia, Philippine, Maldives, Vietnam, Thailand, Myanmar(Burma), Dubai, Syria, Iran, Saudi Arabia, Egypt, Lebanon, Sudan, Oman, Mexico, Venezuela, Argentina, Nigeria, Angola, Congo, South Africa, Niger, Benin, Cameroon, Burkina Faso, Guinea, Guinea-Bissau, Mozambique, Papua New Guinea...
 
Welcome more and more customers come to us, visit our factory and give us suggestion, let us make progress, thanks!

Part 4. Company Information

1. Our factory is located in Guangzhou city, China. It is near the Baiyun International Airport and           
     it is closed two famous port of south China, Huangpu Port and Nansha Port. It is convenient 
    for load and  transport goods and for customers to come to visit our factory.  
 
2. We started in researching, developing and selling all kinds of ice machines since 2004. 
 
3. Our main products are: cube ice machine, tube ice machine, block ice machine, plate ice 
    machine, flake ice machine and cold room.
 
Part 5 . Packing and Shipping:

1. Standard wooden case.
2. Completely ice machine contain: ice machine, cooling tower, water pump, water pipes and water pipe        fittings.
3. Machine come into use, customer only need prepare power for the machine.
4. All required components for install the machine will be provide.

Part 6. Our Services: 
1. We have a large aftersale service team. All the technicians are very experienced, they 
   always go to different countries to serve customers like you.
 
2. The warranty of the whole machine is 12 months.

Part 7. FAQ:

1. The payment can be T/T,L/C,Western Union, Money Gram and in Cash.
2. The deposit is 30%, after we receive your deposit, we will start to produce the 
    machine for you. The balance 70% should be paid before shipping.
3. The delivery time normally is 30 days after receive the deposit.
4. If necessary, we will arrange the shipping for you.