This multi function Din rail Mounted meter is use of advanced energy metering chip, multi-rate application of digital sampling technology and SMT technology, based on people's actual electricity situation designed.
It has achieve timemeasurement, set autosave data time, handheld terminal or PC programming and reading.
The meter has four rates(T1,T2,T3,T4), 10 period, four time zones, power test pulse output maximum demand and reactive power consumption.
Main Functions
1 . Measurement
-Time-measuring positive/reverse active energy; positive/reverse reactive energy and store its data.
-Total electric energy, sharp(T1), peak(T2), flat(T3), valley(T4) were accumulate and save.
- Communication,time switch,repeated power outages will not affect measurement accuracy.
-Meter stored within 12 months historical active and reactive energy consumption data.
- Data will not lost, and can keep for more than 10 years
2. Display Function
- Electric energy shows six integers, and two decimal .
-Auto rolling display function with parameters, round time interval 5 seconds
3 . Communication
--RS485 interface and internal meter is isolated, also design of lightning protection circuitry.
-The communication protocol with reference MODBUS-RTU Statute.
4. Output Function
-Active pulse output test function (pulse width 80ms ± 20ms).
-with RS485 output function, can be realized RS485 centralized meter reading.
5.Event logging
- Recorded present and last 2 month total maximum active demand, and time occurrence.
Accuracy | Class 1.0 |
Rated voltage | 220VAC,230VAC,240VAC,etc. |
Operation voltage range | Un± 20% |
Insulation capabilities | AC voltage withstand 2kV for 1 minute ; Impulse voltage withstand 6kV - 1 . 2/50μs waveform |
Rated current | 5(20)A ,5(25)A ,5(30)A, 5(32)A ,,etc. |
Operation current range | 0.05Ib~ Imax |
Starting current | 0.004Ib |
Rated frequency | 50Hz or 60 Hz |
Internal power consumption | Voltage Circuit ≤1.0W 5VA ; Current Circuit ≤1VA(Ib) |
Interface | Optical coupler (So corresponding to DIN 43864) |
Impulse valence Ra | 0,5 or 1.0 Wh/imp |
Max.operation temperature | -25 ° C ~ +70 ° C |
Max.storage temperature | -30 ° C ~ +75 ° C |
Relative humidity | ≤ 85% |
*Please advise us if you have any different specifications,we can make according to your spcal requirements. |
Working Conditions:
The installation altitude less than 2000m;
The surrounding temperature range: From -25~40 degree;
In the non-explosive condition. Or without adequate erosion and destruction of gas and dust conductive area;
Without rain and snow invade;
Pollution level 2;
Wuhan Radarking Electronics Corp. is a high-tech corporation which established in 2002. As professional manufacture in meters, our mainly products including: Full Digital IC Card Prepayment Electronic Meters, Smart Electronic Meters, IC Card Prepayment Water Meters, Gas Meters as well as Meter (network) Reading System. We are one of the few manufacturers in Hubei Province whose annual production of electronic meters and water meters can be up to 2.4 million sets.
Employee: There are more than 200 employees including 50 technicians, 10 senior technical staff and 70 employees who have already got college degree, 30 of them obtained metrological verification certificate. Production and technical staff all undergo a rigorous pre-service training, who are skilled and have a strong sense of quality.
Technology: We have a R & D group of 20 persons (About 10% of the company's employees).
Equipment: We have 260 sets of production and testing equipments, including 7 production lines, more than 20 units of the calibration device such as wave soldering machine, reflow soldering machine, automatic placement machine, plug-in assembly lines, assembly lines, packing lines and etc, which have all meet the production requirement.
Material: Materials are in strict accordance with the requirements of the meters and the procurement of national standards, we have already established a qualified supplier evaluation system, and developed a series of test standard. All the materials have to pass strict test before entering into factory, and then be used in production. Measures have been taken to prevent damp and static electricity to ensure the normal performance of the raw materials.
Craft: To make a variety of electronic meters in accordance with the production process, we have developed process documents, to ensure the quality of the products.
Test: We have electronic meter laboratory and full range of test equipments, such as EMC Equipment (ESD, EFTB, SURGE, RF, Attenuation Oscillasion Impulse, DIP, Impulse Current, Pulsed Voltage and etc), Environmental Test Equipment (Alternating Temperature Humidity Test Chamber, Dust Test Devices, Waterproof Test Device, Shock Test Device, Vibration Test Device and etc), R&D Testing Equipment. We make a variety of electronic meters in accordance with the test and develop our test documents to ensure the quality of the products.
Environment: Our production base covers an area of 30 acres, and self-building workshop covers an area of 7000 square meters, production and storage area covers more than 5000 square meters.
Management: We have a high efficiency, innovative, serious management team, and the factory has already passed ISO9001-2008 QMS.