Jiangsu Baide Machinery Co., Ltd. >> Uns N06625 Stud Bolt

Uns N06625 Stud Bolt

Uns N06625 Stud Bolt
Price: US $ 1/Piece
Trade Terms: FOB,CFR,CIF
Min Order: 1000/Piece
Pay Type: L/C,T/T

Inconel 625
 

UNS

Trademark

JIS

W.Nr

N06625

Inconel625

NCF625

2.4856

 
 
Inconel 625 Chemical composition
 

Alloy

%

Ni

Cr

Mo

Nb

Fe

Al

Ti

C

Mn

Si

Cu

P

S

625

Min.

balance

20

8

3.15

 

 

 

 

 

 

 

 

 

Max.

23

10

4.15

5

0.4

0.4

0.1

0.5

0.5

0.5

0.015

0.015

 

Inconel 625 Pysical properties
 

Density

8.4 g/cm³

Melting point

1290-1350ºC

 

Inconel 625 Alloy m inimum mechanical properties in the room temperature
 

Alloy status

Tensile strength
Rm  N/mm²

Yield strength
RP0.2 N/mm²

Elongation
A5 %

Brinell hardness
HB

Solution treatment

760

345

30

≤220

 
 
Characteristic as below:
1. Excellent corrosion resistance of different kinds of media in both oxidation and reduction environments.
2. Excellent resistance of pitting and crevice corrosion, and won't happen stress corrosion cracking because of chloride.
3.Excellent resistance of the inorganic acid corrosion performance, such as nitric acid, phosphoric acid, sulfuric acid, hydrochloric acid and the mixture of sulfuric acid and hydrochloric acid.
4. Excellent corrosion resistance of different kinds of inorganic acid mixture performance.
5. Good corrosion resistance of a variety of concentrations of hydrochloric acid when the temperature up to 40ºC .
6. Good machining and welding, no weld cracking sensitivity.
7. Have pressure vessel authentication for the wall temperature between -196 ~ 450ºC .
8. Apply for the highest standard lever VII of acidic environment by the NACE ( MR-01-75)authorized.
Inconel 625 Metallurgical structure
625 is face-centered cubic lattice structure. Dissolve out the carbon granule and instability quaternary phase, then change it to stability Ni3 (Nb,Ti) trimetric lattice around 650ºC after a long time heat preservation. nickel-chromium content will strength the mechanical performance in the state solution while suppress the plasticity.
Inconel 625 Corrosion resistance
625 own a very good corrosion resistance in many media, especially with excellent resistance to pitting, crevice corrosion, intercrystalline corrosion, and erode in oxide, also good resistance to inorganic acid corrosion, such as nitric acid, phosphoric acid, sulfuric acid and hydrochloric acid. 625 can resist the alkali and organic acid corrosion in the oxidation and reduction environment. Effect resists the chloride reduction stress corrosion cracking. Normally no corrosion in the sea-water and industry environments since high corrosion resistance to the sea-water and salting liquid,as well as in high temperature, without sensitivity during welding. 625 have the resistance to oxidation and carbonizing in the static and cycle environments, also hacve the resistance the chlorine corrosion.
 
Inconel 625 Application field :
Soften annealing low carbon alloy 625 widely used in the chemical process industry, good corrosion resistance and high strength made it an good choice for structural parts. 625 have application in sea-water for local mechanical stress attach.

Inconel 625 Typical application field as below:
1 .The Organic chemical process parts contains chloride, especially in the use of acid chloride catalyst.
2. The digester and bleacherin the use of paper pulp and paper making industry.
3.Absorption tower, re-heater,gas import board, fan, blender, fair water fin, flue and so on for using in flue gas desulfurization system.
4. The equipment and parts in the use of acidic gas environments.
5. Acetic acid and anhydride reaction generator 
6. Sulfur acid cooling
Prod Model: Inconel 625
Markets: North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Material: Titanium/Titanium Alloy
Type: Hexagon Head
Head Style: Hexagonal
Standard: GB
Connection: Common Bolt
Finish: Polishing
Grade: 12.9
Jiang Su Baide Machinery Co., Ltd., is located in Dongtai of Jiangsu province. The company has more than 100 employees, 15 technical staff, 5 senior engineer. The company has a vacuum refining, remelting, forging, machining, heat treatment complete production line with annual production capacity of 1500 tons. The company has quality testing equipment such as chemical analysis instruments, spectrometer, carbon and sulfur analyzer, ultrasonic testing, tensile testing machine, hardness tester.

Our products cover high-temperature alloys (GH4145, GH4169, GH3030, GH3128, GH2132), corrosion resistant alloy (Incoloy800, Incoloy825, Inconel600, Inconel601, Inconel625, Inconel 718, Inconel725, Inconel901, Inconel925, Hastelloy B-2, Hastelloy B-3, Hastelloy C-22, Hastelloy C-4, Hastelloy C-276), precision alloy (Ni36, 4J29, 1J79) and other special alloys (duplex steel F51, F53, F55, F60) (super austenitic 904L, 254SMO, 1.4529) for the development and production of technology-based enterprises.

Send your message to this manufacturer

  • Jiangsu Baide Machinery Co., Ltd.

More >

Other Products From This Manufacturer