Alternative ricocel sheet for solder paste printing carrier
Ricocel is an ideal material for solder pallets, wave solder pallets, SMT solder pallets, SMT solder fixtures, selective solder fixtures and other specialty soldering fixtures.
Characteristics
- Excellent durability against repetitive soldering of more than 20,000 times.
- Excellent mechanical strength for precision machining.
- Excellent chemical resistance against soluble flux or pallet cleaner.
- Teflon-coating is not necessary to make up for durability or cleanability.
- Excellent machinability which is durable against high speed machining.
- Lead free material/ RoHS COMPLIANT
- Strong Thin Wall up to 0.5mm
Comparison between Durostone and Ricocel
1.Anti-static resistance value
Alternative Ricocel | Alternative Durostone |
10^6~10^9 | 10^5~10^9 |
2. Thermal warpage
From the figure below, the 24 hour, 280°C continuous heating proves shows that ricocel has less deformation, material size :3x500x500mm
3. Thin wall tooling yielding rate
Alternative Ricocel | Alternative Durostone |
99.48% | 96.53% |
During the tooling process, the thin wall yielding rate will affect the carrier yield rate and production line life. Thus alternative can provide better performance and longer life.
4. Tool wear
With the same tooling conditions, alternative Ricocel can reduce more than 30% of tool wear.
We can also design pallets as per client's requirement. Below information are necessary for the pallet design.
1.2D drawing(.dwg or PDF) or 3D drawing(.STEPor .IGS) of wave solder pallets
2.Gerber file of PCB bare board+ Loaded PCB sample(PCB board with electronic components)
Technical Data Sheet
Name | Ricocel ES-3261A Sheet |
Grade | Anti-static |
Color | Black |
Density(g/cm3) | 2.1±0.5 |
Flexural Strength 3 point support⊥(Mpa) | 470 |
Water Absorption(%) | <0.1 |
Coefficient of linear Expansion(10-6/k) | 11 |
Thermal Conductivity (w/m0k) | 0.4 |
Maximum Operating Temperature(ºC) 10-20seconds | 360 |
Standard Operating Temperature(ºC) | 300 |
Life Cycles(Times) | >20000 |
Surface Resistivity(Ω) | 10^6-10^9 |
Thermal Capacity(J/kgk) | 960 |
Modulus of Elasticity (Mpa) | 20000 |
Chemical Resistance | Good |
Thickness Available(mm) | 3,4,5,6,8,10,12,other thickness available on request |
Thickness Tolerance(mm) | ±0.1 |
Flatness Tolerance (For a panel size of 300*300 | ±0.1 |
Parallelism(mm) | ±0.1 |
Sheet Size (mm) | 1220*2440mm |
Prior Plastic Co., Limited is dedicated in manufacturing semi-finished plastic sheets&plastic rods. Most of our products have been approved by SGS&RoHS, our mission is to deliver the right product, with right price, at right time. Our product covers
Engineering Plastics
POM Sheet, POM Rod, Nylon Sheet, Nylon Rod, PTFE Sheet, PTFE Rod, UHMW PE Sheet, UHMW PE Rod, PC Sheet, PC Rod, PVDF Sheet, PVDF Rod
General Plastics
ABS Sheet, ABS Rod, HDPE Sheet, HDPE Rod, PP Sheet, PP Rod
Insulation Materials
Bakelite Sheet, Epoxy Sheet, Epoxy Rod, Phenolic Sheet, Phenolic Rod, Durostone CAS761 Sheet, Ricocel ES-3261A Sheet
Machined Parts: As per drawings
Besides the standard profiles, we can offer OEM/ODM service. We can not only customize according to your drawings, but also design the drawings for you.
Welcome to send inquiries to us at any time, you will be replied within 12 hours! We look forward to working together with you to set up a bright future.