zhangjiagang manufacture water filling equipment
Mineral Water Production Line is one of advanced models which is our company combines international advanced self-filling process and technology developed specifically for mineral water, pure water and other non-gas beverage filling installation.
Bottled water filling machine/line/system/machinery:
1 Direct connection technology between air conveyor and in-feeding starwheel is applied to replace in-feeding screw and conveying chain to ease bottle changing process with only to change few parts. Newly-designed bottle-separating grippers are assembled to starwheel.
2 We adopts Neck-hanging technology in bottle transportation. Instead of traditional starwheel, we use neck-hanging gripper to make bottle-size-changing easily , without equipment height adjustment ,only few parts need to be adjusted
3 Specially-designed rinser grippers which are made of stainless steel are firm and endurable, with no contact to screw part of the bottle to prevent second pollution.
4 High-speed, easily-cleaned filling valves with big flow volume are equipped with well CIP system and control system to rinse the equipment thoroughly.
5 splint of starwheel using twist descending way to simplify the process of bottle-size-changing. Only need to change arch board and starwheel , within ten minutes
Raw water tank → water pump →Silica sand filter →Active carbon filter→ Softener→ Precision filter→ Reverse Osmosis→ Ozone generator with Ozone generator→Pure water tank → Filling System(Washing,Filling,Capping 3 in 1→Bottle labeling machine →Bottle packing machine
The detailed pictures of Bottle water filling machine/line/system/machinery :
A) Water Filling Line --Water treatment system
B) Water Filling Line --3 in 1 Filling Machine (washing+filling+capping parts)
a) Washing part of Automatic Plastic Bottle still water production line
l All 304 stainless steel rinser heads, water spray style inject design, save water consumption & more clean
l 304 Stainless steel Gripper with plastic pad, ensure minimal bottle crash during washing
l 304 stainless steel washing pump
b)Filling Part of Automatic Plastic Bottle still water production line :
l High precision filling nozzle, PLC variable signal control, ensure high filling precision & filling smoothly & steadily,
l Filling volume adjustable in fine rank, same liquid level after filling
l All 304 stainless steel contact parts & liquid tank, fine polish, no death corner, easy to clean
l 304 stainless steel filling pump
l no bottle no filling
c) Capping part of Automatic Plastic Bottle still water production line:
l Place & capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping
l All 304stainless steel construction
l No bottle no capping,
l Automatic stop when lack of bottle
C) Water Filling Line --Labeling machine
D) Water Filling Line --PE film shrink wrapping machine
Why Choose Us
1. Each water filling machine element tha contacts with the liquid is made of high quality Stainless steel 304, if needed, SS 316 is also available.
2. The water filling machine adopts bottle neck holding transmission technology to realize fully automatic rinsing, filling and capping.
3. Most elements of the electrical system use famous international brand, such as Mitsubish, Omron brand.
4. The water filling machine obtain the advantages of good abrasive resistance,high stability,low failure rate, etc. The
quality of the equipments reaches the international advanced level.
5. Advanced technologies, human-machine interface touch screen and PLC program control are adopted in this machine.
| Model RFC-W series | 14-12-5 | 16-16-5 | 24-24-8 | 32-32-8 | 40-40-10 | 50-50-12 | 60-60-15 |
| Washing-Filling-Capping | 14-12-5 | 16-16-5 | 24-24-8 | 32-32-8 | 40-40-10 | 50-50-12 | 60-60-15 |
Producing capacity
(600ml) | 2000-4000
(bph) | 5000-7000
(bph) | 8000-12000
(bph) | 12000-15000
(bph) | 16000-20000
(bph) | 20000-24000
(bph) | 25000-30000
(bph) |
| Applicable bottle (mm) | φ=50-108 H=170-340 330ml-2.25L |
| Pressure (kg/cm2) | 2~3 |
Outside vacuum
pump power (kw)
| Main motor
1.5kw | Main motor
2.2kw | Main motor
3kw | Main motor
4kw | Main motor
7.5kw | Main motor
9.5kw | Main motor
12kw |
Overall dimension (mm)
(LxWxH) | 2100x1400
x2700 | 2460x1720
x2700 | 3100x2100
x2700 | 3500x2500
x2700 | 4600x1800
x2700 | 5200x4500
x2700 | 6500x4500
x2700 |
| Weight(kg) | 2500 | 3500 | 4200 | 5500 | 6800 | 7600 | 9800 |
Established in 2002, Blissum is one of the professional & reliable China manufacturers & provide of liquid & semi-liquid filling machinery, sealing capping machinery & other liquid packaging machinery with reliable machine quality & after sale service!
Our extensive experience of liquid & semi-liquid filling & packaging and container handling enables us to offer complete solutions to designs, manufactures, supplies, installs, maintains, troubleshoots, and upgrades plants for complete processing and packaging lines with special emphasis on bottling in glass, PET, Jar, can, and kinds of container
With a flexible approach, we are able to provide the right solutions for a diverse customer base, from small start up companies through to major national companies. Our many satisfied customers come from a very wide range of industries, including toiletries, cosmetics, pharmaceuticals, food, drink, household products and chemicals.
Blissum with ethos focus on after sale customer service, strive to achieve excellence, from our initial response to your enquiry to our after sales support and spares service.
