2512 +/-5% SMT SMD Resistor Regular Series
| Price: |
US $ 0.0075/Piece |
| Trade Terms: |
FOB,EXW |
| Min Order: |
10000/Piece |
| Pay Type: |
L/C,T/T,D/P |
High quality series SMD Resistors1.over 8 years experience, Professional resistor manufacturer.
2. Good overload resistor.
3. RoHS & ISO9001&ISO14000
4. OEM.FEATURES. Extremely thin and light.Highly stadle in auto-placement surface mounting application.Compatible with both flow soldering and reflow solbering.Available in 8mm & 12mm tape and reel per ELA-RS418
| TYPE | L | W | C | D | H |
| 0402 | 1.00+/-0.15 | 0.50+/-0.15 | 0.20+/-0.15 | 0.20+/-0.15 | 0.35+/-0.10 |
| 0603 | 1.60+/-0.15 | 0.80+/-0.15 | 0.30+/-0.15 | 0.30+/-0.15 | 0.45+/-0.10 |
| 0805 | 2.10+/-0.15 | 1.25+/-0.10 | 0.35+/-0.20 | 0.35+/-0.20 | 0.50+/-0.10 |
| 1206 | 3.10+/-0.15 | 1.55+/-0.10 | 0.45+/-0.20 | 0.45+/-0.20 | 0.55+/-0.10 |
| 1210 | 3.10+/-0.15 | 2.55+/-0.10 | 0.50+/-0.20 | 0.50+/-0.20 | 0.55+/-0.10 |
| 2010 | 5.00+/-0.20 | 2.50+/-0.20 | 0.60+/-0.20 | 0.60+/-0.20 | 0.55+/-0.10 |
| 2512 | 6.30+/-0.20 | 3.10+/-0.20 | 0.60+/-0.20 | 0.60+/-0.20 | 0.55+/-0.10 |
| CODE IDENTIFY NO.(CP) | SUBJECT:CHIP RESISTORS | PAGE:2 |
RATING
Type
| Power
Rating
at
70°C |
Max
RCWV | Max
Overload
Voltage
| Temperature
Coefficient of
Resistance
(ppm/°C) | Resistance Tolerance(%), Range (Ω)
&Standard Values | D (+/-0.5%)
E-96 | F (+/-1%)
E-96 | G (+/-2%)
E-24 | J (+/-5%)
E-24 |
CP02
(0402) |
1/16W
|
50V |
100V | +/-100
+/-200
+/-400 |
| 10Ω-1MΩ | 10Ω-1MΩ | 10Ω-10MΩ
1Ω-9.1Ω |
CP03
(0603) |
1/10W |
50V |
100V | +/-50
+/-100
+/-200
+/-400 | 100Ω-100KΩ
10Ω-91Ω,
110K -1MΩ |
10Ω-1MΩ |
10Ω-1MΩ |
10Ω-10MΩ
1Ω-9.1Ω |
CP05
(0805) |
1/8W |
150V |
300V | +/-50
+/-100
+/-200
+/-400 | 100Ω-100KΩ
10Ω-91Ω,
110K -1MΩ |
10Ω-1MΩ |
10Ω-1MΩ |
10Ω-10MΩ
1Ω-9.1Ω |
CP06
(1206) |
1/4W |
200V |
400V | +/-50
+/-100
+/-200
+/-400 | 100Ω-100KΩ
10Ω-91Ω,
110K -1MΩ |
10Ω-1MΩ |
10Ω-1MΩ |
10Ω-10MΩ
1Ω-9.1Ω |
CP12
(1210) |
1/3W |
200V |
400V | +/-100
+/-200
+/-400 |
|
10Ω-1MΩ |
10Ω-1MΩ |
10Ω-10MΩ
1Ω-9.1Ω |
CP20
(2010) |
3/4W |
200V |
400V | +/-100
+/-200
+/-400 |
|
10Ω-1MΩ |
10Ω-1MΩ |
10Ω-10MΩ
1Ω-9.1Ω |
CP25
(2512) |
1W |
200V |
400V | +/-100
+/-200
+/-400 |
|
10Ω1MΩ |
10Ω-1MΩ |
10Ω-10MΩ
1Ω-9.1Ω |
Explanation of Part Numbers
Size
02~0402
03~0603
05~0805
06~1206
12~1206
20~2010
25~2512 |
Resisance Value
3Digit E-24±5%&±2%
1st2significant
3 rd multiplier(10n)
E-96EIA-96 marking
4Digit E-96±1%& ±0.5%
1 st 3significant
4 rd multiplier(10n)
Jumper 000 |
Tolerance
D±0.5%
F±1%
G±2%
J±5% |
Packing
TR~Tape and Reel
BB~Bulk in box |
Cp 03 473 J TR
|
| TypeThick
Film
Chip
Resistors |
|
MARKING DIAGRAMS
3 digit marking for E-24,1 st 2 significant figures,3 rd multiplier(10n)
Examples;1R5=1.5Ω, 223=22KΩ
101=100Ω 474=470KΩ
122=1.2KΩ 000=0Ω
4 digit marking for E-96,1 st 3 significant figures,4 rd multiplier(10n)
Examples:10R2=10.2Ω, 2212=22.1KΩ
9090=909Ω, 4753=475KΩ
1001=1KΩ, 6983=698KΩ
5 digit marking for E-96,1 st 2 code on table below,3 rd code multiplier(10n)
Examples: 02X=10.2Ω, 34C=22.1KΩ
93A=909Ω, 66D=475KΩ
01B=1KΩ, 82D= 698KΩ
EIA-96 Marking Table
| Code | R.V alue | Code | R.V alue | Code | R.V alue | Code | R.V alue | Code | R.V alue | Code | R.V alue | | 01 | 100 | 17 | 147 | 33 | 215 | 49 | 316 | 65 | 464 | 81 | 681 | | 02 | 102 | 18 | 150 | 34 | 221 | 50 | 324 | 66 | 475 | 82 | 698 | | 03 | 105 | 19 | 154 | 35 | 226 | 51 | 332 | 67 | 487 | 83 | 715 | | 04 | 107 | 20 | 158 | 36 | 232 | 52 | 340 | 68 | 499 | 84 | 732 | | 05 | 110 | 21 | 162 | 37 | 237 | 53 | 348 | 69 | 511 | 85 | 750 | | 06 | 113 | 22 | 165 | 38 | 243 | 54 | 357 | 70 | 523 | 86 | 768 | | 07 | 115 | 23 | 169 | 39 | 249 | 55 | 365 | 71 | 536 | 87 | 787 | | 08 | 118 | 24 | 174 | 40 | 255 | 56 | 374 | 72 | 549 | 88 | 806 | | 09 | 121 | 25 | 178 | 41 | 261 | 57 | 383 | 73 | 562 | 89 | 825 | | 10 | 124 | 26 | 182 | 42 | 267 | 58 | 392 | 74 | 576 | 90 | 845 | | 11 | 127 | 27 | 187 | 43 | 274 | 59 | 402 | 75 | 590 | 91 | 866 | | 12 | 130 | 28 | 191 | 44 | 280 | 60 | 412 | 76 | 604 | 92 | 887 | | 13 | 133 | 29 | 196 | 45 | 287 | 61 | 422 | 77 | 619 | 93 | 909 | | 14 | 137 | 30 | 200 | 46 | 294 | 62 | 432 | 78 | 634 | 94 | 931 | | 15 | 140 | 31 | 205 | 47 | 301 | 63 | 442 | 79 | 649 | 95 | 953 | | 16 | 143 | 32 | 210 | 48 | 309 | 64 | 453 | 80 | 665 | 96 | 976 |
| Code | A | B | C | D | E | F | G | X | Y | Z | | Multier | 100 | 101 | 102 | 103 | 104 | 105 | 106 | 10-1 | 10-2 | 10-3 |
Remark:The Marking(block letters) may be usd small letters is same.
SPECIIFICATIONS AND TEST METHODS| ITEM | SPECIFICATIONS | TEST METHODS | | DC Resistance | D:±0.5%,F±1%,G:±2%,J±5%
Zero ohm Jumper<50mΩ | JIS-C-5202-5.1
|
Temperature
Coefficient of
Resistance
(TCR) |
±50~±400(ppm/ºC) | JIS-C-5202-5.2
(R1-R2)
TCR(ppm/ºC= X106
R1(T2-T1)
R1:Resistance at reference temperature(T1)
R2:Resistance at test tempcrature(T2)
T1:Room temperature(ºC)
T2:Test temperature:-55ºC or 125 | Short time
Overload | J&G: R<=±(2%+0.1Ω)
F&D: R<=±(1%+0.1Ω) | JIS-C-5202-5.5
02.5 X Rated voltage (Max. Overlord Voltage)
for 5 sec.Measure resistance after 30 minutes | Insulation
Resistance | Between termination and coating
Must be over1,000MΩ | JIS-C-5202-5.6
Test voltage :100 VDC | Dielectric
Withstanding
Voltage |
NO evidence of flashover breakdown |
JIS-C-5202-5.7 | Inter0mittend
Overload | R<=±(5%+0.1Ω)
No mechanical damage | JIS-C-5202-5.8
2.5 X Rated voltage(Max. Overload Voltage)
1 sec. ON,25 sec. OFF.test 10,000 cvcles | | Noise Level | Resistance Noise
R<100Ω <=-10db(0.32uV/V)
100Ω<=R<1KΩ <=0db(1.0uV/V)
1KΩ<=R<10KΩ <=10db(3.2 uV/V)
10KΩ<=R<100KΩ <=15db(5.6 uV/V)
100K<=R<Ω1MΩ <=20db(10 uV/V)
1MΩ<=R <=30db(32 uV/V) |
JIS-C-5202-5.9 | Terminal
Strength | J&G: R<=±(1%+0.05Ω)
F&D: R<=±(1%+0.05Ω)
No mechanical damage | JIS-C-5202-6.1
5N for 10 sec | Resistance to
Solvent | No physical or electrical damage or
deterioration | JIS-C-5202-6.9 | Resistance to
Solder Heat | J&G: R<=±(1%+0.05Ω)
F&D: R<=±(0.5%+0.05Ω)
No mechanical damage | JIS-C-5202-6.10
With 260±5ºC for 10±1 sec | | Solderability | Over 95% of termination must
Be covered with solder | JIS-C-5202-6.11
After immersing flux. Dip in the 215±3ºC
molten solder bath for 3 sec |
|
|
|
|
SPECIFICATIONS AND TEST METHODS
| ITEM | SPECIFICATIONS | TEST METHODS |
Temperature
Dry Heat | J&G: R<=±(2%+0.1Ω)
F&D: R<=±(1%+0.05Ω)
No mechanical damage | JIS-C-5202-7.2
125±5ºC for 96±4 hrs.
Measure resistance after 60 minutes |
Temperature
Cycle | J&G: R<=±(1%+0.05Ω)
F&D: R<=±(0.5%+0.05Ω)
No mechanical damage | JIS-C-5202-7.4
Repeat 5 cycles as follows
-55ºC for 30 min ,Room Temp. for 3 min
+125ºC for 30 min, Room Temp.for 3 min
After 1 hours. Measure the resistance value. |
Laod Life
Humidity | J&G: R<=±(2%+0.05Ω)
F&D: R<=±(0.5%+0.05Ω) | JIS-C-5202-7.9
Permanent resistance change after
Cycle ON for 90 min. and OFF 30 min.for
1,000+48/-0 hours. After 1 hours.
Measure the resistance value |
| Load Life | J&G: R<=±(3%+0.05Ω)
F&D: R<=±(1%+0.05Ω) | JIS-C-5202-7.10
Permanent resistance change after
Cycle ON for 90 min. and OFF 30 min. for
1,000+48/-0 hours at RCWV or Max.
Keep the resistor at 70±2ºC ambient
After 1 hours measure the resistance value |
Bending
Strength | J&G: R<=±(3%+0.05Ω)
F&D: R<=±(1%+0.05Ω)
No mechanical damage | JIS-C-5202-6.1.4
(D):CP 02,03,05=5mm
CP 06,12,25=3mm
|
| Size | A | B | W | E | F | T1 | T2 | P | P0 | 10xP0 | P1 |
| CP 02 | 1.15±0.1 | 0.65±0.1 | 8.0±0.2 | 1.75±0.1 | 3.5±0.05 | --- | 0.6±0.1 | 2.0±0.1 | 4.0±0.05 | 40±0.2 | 2.0±0.05 |
| CP 03 | 1.85±0.1 | 1.1±0.1 | 8.0±0.2 | 1.75±0.1 | 3.5±0.05 | --- | 0.6±0.1 | 4.0±0.1 | 4.0±0.05 | 40±0.2 | 2.0±0.05 |
| CP 05 | 2.35±0.1 | 1.65±0.1 | 8.0±0.2 | 1.75±0.1 | 3.5±0.05 | --- | 0.75±01 | 4.0±0.1 | 4.0±0.05 | 40±0.2 | 2.0±0.05 |
| CP 06 | 3.5±0.2 | 1.9±0.2 | 8.0±0.2 | 1.75±0.1 | 3.5±0.05 | --- | 0.75±0.1 | 4.0±0.1 | 4.0±0.05 | 40±0.2 | 2.0±0.05 |
| CP 12 | 3.5±0.2 | 2.8±0.2 | 8.0±0.2 | 1.75±0.1 | 3.5±0.05 | --- | 0.75±0.1 | 4.0±0.1 | 4.0±0.05 | 40±0.2 | 2.0±0.05 |
| CP 20 | 5.5±0.2 | 2.8±0.2 | 12±0.2 | 1.75±0.1 | 5.5±0.05 | 0.85±0.15 | 0.23±0.1 | 4.0±0.1 | 4.0±0.05 | 40±0.2 | 2.0±0.05 |
| CP 25 | 6.7±0.2 | 3.4±0.2 | 12±0.2 | 1.75±0.1 | 5.5±0.05 | 0.85±0.15 | 0.23±0.1 | 4.0±0.1 | 4.0±0.05 | 40±0.2 | 2.0±0.05 |
| Reel Dimensions unit:mm |
|
| Size | W | M | A | B | C | D |
| CP 02 | 12.5
±1.5 | 178
±2.0 | 2.0
±0.5 | 13.5
±0.5 | 21.0
±0.5 | 60.0
±2.0 |
| CP 03 |
| CP 05 |
| CP 06 |
| CP 12 |
| CP 20 | 16.5
±1.5 | 80.0
±2.0 |
| CP 25 |
| Taping Package:(pcs/reel) | Bulk Package:(pcs/case) | Size | Bulk Case pcs |
|
| CP 03 | 25,000 |
|
| CP 05 | 10,000 |
|
| Size | Paper Carrier | Plastic Carrier | CP 06 | 5,000 |
|
| CP 02 | 10,000 | --- | Unit:mm |
|
|
| CP 03 | 5,000 | --- |
|
| CP 05 | 5,000 | --- |
|
| CP 06 | 5,000 | --- |
|
| CP 12 | 5,000 | --- |
|
| CP 20 | --- | 4,000 |
|
| CP 25 | --- | 4,000 |
|
| Prod Model: |
2512 J |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| SMD Chip Resistor: |
SMD Resistor |
| Function For Resistance: |
Load Resistor |
| Installation: |
SMD Resistor |
| Resistance: |
SMD Chip Resistor |
| Material: |
SMD Chip Resistor |
| Type: |
SMD Chip Resistor |
| Quantity: |
PCS |
| Brand: |
Kaec |
Dongguan Kaian Electronics Co., Ltd. is a professional supplier of electronic components. We are committed to the development and production of various types of resistors, such as, gold aluminum resistors, glass glaze resistors, wirewound resistors, high voltage resistors, pulse resistors, NTC thermistor, PTC thermistor, PTC constant temperature heating film, PTC degaussing resistors, varistors, cement, metal oxide film, carbon film, precision resistors, SMD chip resistors and the like. Widely used in instrumentation, medical equipment, water meters, switching power supply, LED, color TV, refrigerator, energy saving lamps, computers and communication facilities, and other household appliances. And machinery manufacturing, electrical and mechanical braking. Companies with high quality positioning, focusing on user practices and product development, customers get the recognition! We offer high quality and favorable prices.
We have more than 10, 000 square meters of production space and advanced production and testing equipment. Our products are in strict compliance with the quality management system ISO9001, first-class service. All our products have reached the advanced domestic and international standards, the monthly output 1 billion.
Our mission is to adhere to the best products and services to customers, and strive to become the leading supplier of electronic components. We adhere to the "quality first, service first, continuous improvement and innovation to meet customers" business philosophy to "zero defect, zero complaints" as the quality objectives.
Looking ahead, the company will continue adhering to the "equality, credibility, cooperation and development" business philosophy, and constantly increase investment and accelerate the pace of enterprise development, dedicated to domestic and foreign customers with the highest quality products and most satisfactory services, and is willing to sincerely cooperate with all friends, by leaps and bounds! We look forward to our cooperation!
