Car Washing Machine, Conveyorized Tunnel System,12Brushes Fully-automatic Tunnel Car Wash, Car Wash Tunnel, Tunnel Car Wash, Car Washing Tunnel GT-R800, 12Brushes Fully-automatic Conveyor Tunnel Car Wash, Automatic Car Wash Machine, Car Wash Machine, Carwash Machine, Car Washing Machine, Automatic Car Washing Machine, Automatic Car Wash, Carwash Tunnel Equipment, Car Wash Machine Tunnel, Car Wash Conveyor, gt r800 car wash, cover tunnel car wash, Car Wash Machine Automatic, Machine Car Wash, lavadora de autos, lavadora de auto, Tunnel Wash Machine, Car Wash Equipment, Car Wash Center, Car Wash Station, Car Wash Box, Car Wash Cabin, Fast Car Wash, Speed Car Wash
Mobile: +86-13738082939, Tel.: +86-571-82136157
Automatic Conveyor Tunnel Car Washing System |
Model | GT-R800 |
Machine Size | L*W*H=17340*4448*4120mm |
Car Cleaning Size | W*H=2300*2300m |
Machine Net Weight | 6500KGS |
Machine Packing Size | 44.63CBM |
Power Supply | 3phase, AC380V 50-60Hz or customized voltage |
Total Power | 26.5KW |
Electricity Consumption | 0.6KWH-0.8KWH/car |
Water Consumption | 110L/Car |
Washing Speed | 60cars/hour |
Washing Type | Tunnel type continuous washing |
List of Main Parts-total 12 brushes |
Wheel Washing Brushes | 2pieces |
High Pressure Nozzles for Wheel Washing | 4pieces |
Big Side Washing Brushes | 4pieces |
Top Washing Brush | 1piece |
Small Side Washing Brushes | 2pieces |
Polishing/Drying Brushes | 3pieces |
Automatic Conveyor System | 1set |
Automatic Shampoo System | 1set |
Automatic Wax System | 1set |
High Pressure Rinse System | 1set |
High Pressure Bottom and Side Washing System | 1set |
Automatic Fixed Drying System | 1set, 5.5KW/Blower, total 4pieces blowers 22KW. Fixed drying system+polishing brushes combined drying, 100% drying car, very suitable for cold place car washing. |
Big Arch Shell | 1set, Optional |
Machine Frame | Hot galvanization treatment and torque tube imported pneumatic components |
Waterproof Standard | National standard level 4 |
Control Type | PLC and color touch screen |
Functions |
Automatic high pressure side washing | Yes |
Automatic high pressure bottom washing | Yes |
Automatic wheel brush system with high pressure washing | Yes |
Automatic water spray | Yes |
Automatic shampoo spray | Yes |
Automatic wax spray | Yes |
Automatic fixed blowers drying+polishing brushes combined drying system | Yes, 100% drying car |
Automatic polishing system | Yes, chamois leather materials |
Machine Features
1. Independent steel frame structure-If there were problem about one of structures, this group structure doesn't affect the functions of the rest three steel structures.
The buyers just replace one component to repair the machine if there were damage about any component.
2. Antirust process: hot galvanizing-Machine frame uses high quality section bar steel tube and galvanized pipe with features high strength and high performance. The steel surface is treated with sand blast, hot galvanizing and epoxy coating. The life span of machine frame is above 10years.
3. High quality brush-Imported brush can wash 400000Cars. Brush bar is made by high quality alloy section bar with features high strength, no distort and no deformation.
4. High pressure spray nozzle and high pressure prewashing-Spray nozzle is made by forged alloy, no rust and good performance under high pressure. The angle of spray nozzle is adjustable according to the car. 90KGS high pressure water can clean mud and sand on the surface of the car to prevent brushes scratching car paint.
5. PLC-Delta brand PLC can adopt bad operating environment, strong anti-interference ability, high reliability and high system stability.
6. Motor-IP76 high waterproof motor, low noise, low failure rate and long life span.
7. Pneumatic Components-AIRTAC brand pneumatic components make sure that air circuit is in good condition.
8. Induction System-Photoelectric sensor and approach switch uses Japan Omron brand with features of high precision, fast response and non-contact.
9. Protection System-Relay, AC contactor uses Schneider brand. The machine is equipped with earth leakage protection.
High Pressure Prewashing for chassis and car sides
Wheel Brush washing with High Presure Washing
4Pieces blowers (5.5KW/blower, total 22KW) fixed drying system+polishing brushes combined drying car, 100% drying water.
1set machine in 1*40HQ Container,
Small Parts Packing: Solid plywood box with steel frame inside
Mobile: +86-13738082939, Tel.: +86-571-82136157
Ningbo City Beilun Qin Chuan Machinery Co., Ltd locates in Ningbo City, Zhejiang Province, China.
If you want to visit us, please take flight to the Hangzhou Xiaoshan International Airport & we can pick you up from the airport and take you to our factory for inspection.
We provide solutions for plastic products production lines including plastic injection molding machine, accordiingly molds, plastic crusher, water chiller, hopper dryer, color mixer etc. We can also provide the solution for robots per requirements.
For PET bottles, we provide solutions for the plastic blow molding machine and the molds. Usually we also need the plastic injection molding machine for producing the caps too.
For rubber machines, we have solutions for rubber injection molding machine and the molds.
For vertical injection molding machine, we have good experience for providing all kinds of vertical injection molding machine and the molds.
Our team also have several years experience for providing high quality touchless car washing system and tunnel car washing equipment. We have exported this equipment to many countries.
For the extile machinery, we have good products and service for flat knitting machine, socks knitting machine, small circular knitting machine and dyeing machine etc under a very competitive price for all the items for our users.
We have a 6 people team for dealing with the sales and afterwards service. We are expecting your visit here.