Product Description
Name: Stainless Steel Mixing Tank
Feature:equipments are designed and manufactured fully according to the demand of GMP and to
standards, such as steel pressure vessels (GB150-1998), andsteel welded atmospheric
pressure vessels (JB/T4735-1997), etc.
Description:
Product technical description:
Specification: 30L~50000L
Material: SS316L or SS304
Surface finish: inside surface is Ra0.28~0.6μm by mechanical polish. (passivation or electropolish are optional). Outside surface is Ra0.6~0.8μm by satin finish.
Agitator: Top mechanical agitator (propeller, spiral and anchor or others)
Pressure: ATM or pressure vessel (-0.1~1Mpa)
Structure: Single layer vessel, vessel with jacket, vessel with jacket and insulation
Jacket type: dimple jacket, full jacket, or coil jacket
Insulation material: rock wool
Components: vent filter, temp. gauge, level gauge, manhole, sight glass with lamp and cleaning ball or according to client's detail requirement.
Manufacture standard for pressure vessel: GB150-1998, ASME or PED/23/EC
Application:
Stainless steel stirred tank widely used in pharmaceutical, chemical, food, beverage, water treatment, brewing, ink, oil, printing and dyeing, environmental protection, oil, alcohol, hospitals and other industries, various types of liquid filtration, rough filtration, fine filtration, clarification ideal equipment purification treatment.
Stainless steel mixing tank is my company's own development of new products, with no leakage, fully enclosed, corrosion-resistant, energy-saving features. Due to its non-contact torque transmission to replace the static seal dynamic seal, to solve the other shaft seal can not overcome the problem of leakage, the entire media and agitation in sterile health status to operate, pharmaceutical, fine chemicals, cosmetics and biological engineering industry ideal replacement products.
Suitable material under a certain pressure mechanical stirring flammable, explosive, toxic, odor and other dissolved materials, sterilization, fermentation process takes a long time (over 24 hours) constant moving equipment. More suitable for biological engineering in the production process does not allow any trace leaks and contaminated equipment.
Technical Parameter
Effective volume | Dimension of tank | Total height | Diameter of inlet&outlet | Heat preservation layer | Motor power | Blending speed |
| (L) | (mm) | (mm) | (mm) | (mm) | (kw) | (r/min) |
| 500 | 840*1000 | 2750 | 60 | 38 | 0.55 | Common rotation speed 35,43,60 ; stepless speed reducer or dual-speed reducer are also available |
| 600 | 920*1000 | 2850 | 60 | 38 | 0.55 |
| 700 | 990*1000 | 2850 | 60 | 38 | 0.55 |
| 800 | 950*1220 | 3000 | 60 | 38 | 0.55 |
| 900 | 1010*1220 | 3000 | 60 | 38 | 0.55 |
| 1000 | 1060*1220 | 3150 | 60 | 51 | 0.75 |
| 1500 | 1160*1500 | 3350 | 60 | 51 | 0.75 |
| 2000 | 1340*1500 | 3410 | 60 | 51 | 1.1 |
| 3000 | 1410*2000 | 4000 | 60 | 51 | 1.5 |
| 4000 | 1620*2000 | 4250 | 60 | 51 | 1.5 |
| 5000 | 1810*2000 | 4300 | 60 | 51 | 2.2 |
| 6000 | 1980*2000 | 4550 | 60 | 51 | 2.2 |
| 7000 | 1930*2440 | 5000 | 60 | 51 | 2.2 |
| 8000 | 2060*2440 | 5000 | 60 | 51 | 3 |
| 9000 | 2180*2440 | 5050 | 60 | 51 | 3 |
| 10000 | 2300*2440 | 5050 | 60 | 51 | 3 |
| 12000 | 2270*3000 | 5600 | 60 | 51 | 4 |
| 15000 | 2530*3000 | 5700 | 60 | 51 | 4 |
| 20000 | 2640*3660 | 6400 | 60 | 51 | 5.5 |
The stainless steel mixing tank performance:
1.Tank and tank with the same or different forms of head structure, in the form of a jacket or a single combination of different requirements noted in a device structure.
2 .magnetic stirring device into a magnetic stirrer and under magnetic stirring on a magnetic stirrer suitable capacity (3-50m3) and large-torque device. Under magnetic stirring with capacity of less than (3m3) and equipment with high hygiene requirements.
3. interface with the international standard ISO standard quick chuck, the material is imported 316L or 304, the inner surface of the mirror-polished Ra ≤0.28 μm, the outer surface of the matte or mirror polished.
4 .Material: cylinder 304 and 316L (optional). 5 level gauge with universal flat level gauge, level gauge glass, level gauge static pressure sensor, ultrasonic level meter for selection.
Guangzhou Li&Li Professional Chemical Equipment Co, . Ltd. Is professional corporation that mainly operates design, manufacture, installation and debugging of cosmetic, pharmaceutical, chemical, food, etc. Equipments. Enterprise strictly implements the ISO9001 standard management, with strong technical force, complete detection equipment, advanced process and complete product variety which including all kinds of Reaction Kettle, agitator bath, storage tank, vacuum emulsifying machine, conveyor, filling machine and non-standard equipments process and manufacture; Electrical engineering, automatic-control engineering, pipe design and equipment installation.
Guangzhou Li&Li Professional Chemical Equipment Co, . Ltd. Is professional corporation that mainly operates design, manufacture, installation and debugging of cosmetic, pharmaceutical, chemical, food, etc. Equipments. Enterprise strictly implements the ISO9001 standard management, with strong technical force, complete detection equipment, advanced process and complete product variety which including all kinds of Reaction Kettle, agitator bath, storage tank, vacuum emulsifying machine, conveyor, filling machine and non-standard equipments process and manufacture; Electrical engineering, automatic-control engineering, pipe design and equipment installation.
As technology is developing day by day, we produce different kinds of machines with traditional business philosophy. Each process is with meticulous planning and requirements, such as function design, energy data, materials selection, welding technique even appearance beautification. Machines can meet a criterion of food, pharmaceutical and other production equipments health inspection standard. Production line adopts Japanese traditional production technology and professional skill, to improve product quality and technical level, and uses new manufacturing technology, advanced welding and weld stress relief and other equipment to hammer at product function, improving service life, research and development and can meet all requirements for quality and inspection standards. Our company always in line with "High-tech as the forerunner, quality strives for the survival, market strives for development" management theory; Insist the principle of "Customer First" to provide our clients with high quality services.
Strict standard management ensures products quality in design, manufacture, inspecting and other step. Well-quality professional technical team provides you installation, commissioning and training service. We will be in line with mutual benefit and common development principle, to build brand and credit by higher quality and better service, do our best to create the first-class enterprise in this industry.
