Categories
Price: | US $ 80000-100000/Piece |
---|---|
Trade Terms: | FOB,CIF,CIP |
Min Order: | 1/Piece |
Pay Type: | T/T,Western Union |
1 | Basic Parameter | ||
Pipe outer diameter | Φ50-Φ1500mm | ||
Effective cutting pipe length | ≤12000mm | ||
Flame cutting pipe thickness | 5-50mm | ||
Plasma power source | Hypertherm MAXPRO200 | ||
Plasma cutting thickness | 1-30mm | ||
Max. Pipe loading capacity | 8000KG | ||
Pipe material | Carbon Steel, Stainless Steel, Alloy Steel, etc. | ||
2 | Axis | ||
Number of the control axis | 5 | ||
3 | Name of axis | ||
Rotate the work piece (X) | |||
Cutting torch move along with Pipe Axis (Y) | |||
Cutting torch swing in Pipe axis direction (Z) | |||
Cutting torch move up and down in vertical direction (U) | |||
Cutting torch swing in radial direction of pipe axis (W) | |||
4 | Axis running range | ||
Rotate freely | No limited in X | ||
Max stroke in Y axis | 12000mm | ||
Max rotation angle in Z axis | ±60° | ||
Max stroke in U axis | 500mm | ||
Max Rotation angle in W axis | ±60° | ||
5 | Beveling angle | ||
Flame beveling angle | ±60° | ||
Plasma beveling angle | ±45° | ||
6 | Cutting speed | ||
Flame cutting speed | 50-750mm/min | ||
Plasma cutting speed | 50-9000mm/min | ||
7 | Overall accuracy | ||
Portrait Moving Error | ≤0.2mm per 1000mm | ||
Turning Angle Error | ≤1° per 180° | ||
Surface quality | Clean and no dregs | ||
8 | Idle speed | ||
X axis rotate speed | 0-10000mm/min |
1 | Mechanical parts | |
Dedicated chuck | 1 set | |
Hypertherm MAXPRO200 | 1 set | |
Plasma cutting torch | 1 set | |
Flame cutting torch | 1 set | |
2 | Electrical parts | |
Numerical control system | 1set | |
Driving motor | Panasonic(Japan Brand) | |
Driving control system | Panasonic(Japan Brand) | |
Moving controller card | Programmable Multi-Axis Controller | |
Gear box | SEW(Germany Brand) | |
3 | Control system configuration (Advantech, made in TAIWAN) | |
CPU | Intel Atom N270(1.6GHz); | |
Torch screen | 12.1" color touch screen | |
RAM and VGA card | 1G VGA card | |
Input model | MID Floppy disk or U disk | |
Data reserve model | Floppy disk and hard disk | |
Hard disk | 320G | |
Operation system | WINDOWS | |
Network card | 100M | |
Motor axis controller | PMAC-motion card |
1 | Rotate the work piece (X)(√) |
Precision gear box, gear secondary transmission | |
Rotate speed 0.1-25r/min | |
Servo motor Panasonic motor | |
Position accuracy ±0.1mm | |
2 | Cutting torch move along with Pipe Axis (Y)(√) |
Precision gear box, gear and track transmission | |
Track length of the cutting head(Max stroke) 12000mm | |
Servo motor Panasonic motor | |
Position accuracy ±0.2mm | |
3 | Cutting torch swing in Pipe axis direction (Z)(√) |
Precision worm-gear case transmission | |
Swing angle ±60° | |
Servo motor Panasonic motor | |
Position accuracy ±0.1mm | |
4 | Cutting torch move up and down in vertical direction (U)(√) |
Precision gear box, ball screw transmission Cutting torch up and down stroke in vertical 500mm Servo motor Panasonic motor Position accuracy ±0.2mm | |
5 | Cutting torch swing in radial direction of pipe axis (W)(√) |
Precision gear box transmission Swing angle ±60° Servo motor Panasonic motor ±0.1mm Position accuracy |
Item | Contents |
1 | User shall make cement foundation. (Seller will supply the drawing of cement foundation.) |
2 | Voltage requirement: (1)3×380v±10%/50Hz,220v±10%/50Hz (2)Three-phase voltage stability less than ±5% (3)Three-phase voltage unbalance less than 2.5% (4)Suggested using voltage-stabilized source. Note: Grounding resistance ≤10 |
3 | Flame cutting gas requirement: Gas type: propane\acetylene \ LPG Fuel gas pressure:0.05-0.1 MPa Cutting oxygen pressure:0.5-0.8 MPa Pre-heat oxygen pressure:0.4-0.6MPa |
4 | Compress air pressure requirement (Plasma cutting): (1) Gas flew requirement: 0.9m3/min (2) Gas pressure: 8.3kg/cm2 (3) Dew-point temperature not exceed 5 centigrade: oil content≤0.003ppm solid particle≤0.01micron (4) Suggested using oil free air compressor, freezing dryer and ultra filter (system cannot have rust components) |
5 | Cutting pipe must be smooth surface oval-shaped deviation less than 5mm diameter. Reach ISO standard. |
Prod Model: | NCM |
---|---|
Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Plasma Power Source: | Hypertherm Maxpro200 |
Plasma Cutting Thickness: | 1-30mm |
Pipe Material: | Carbon Steel,Stainless Steel,Alloy Steel |
Application: | Machinery & Hardware |
Type For Cutting Machine: | CNC Cutting Machine |
Type For Fold-bending Machine: | CNC Fold-bend Machine |
Automation: | Automatic |
Type: | Pipe Cutting |