Used Turbine Oil Recycling Equipment
1. Introduction of Used Turbine Oil Recycling Equipment
Turbine oil is used for cooling, lubricating or speed regulation of various turbine or hydro-turbine systems which will be polluted by water (free water, dissolved water, emulsified water) and particles.
Water and particles will seriously affect safe running and lifetime of turbine or lubricating systems.
ZJC-T Series Turbine Oil Purifier Machine can work combined with our JB regeneration system to remove oil sludge and colloid, to de-color and reduce acid value.
2. Features of Used Turbine Oil Recycling Equipment
1)Vacuum separation of the oil treatment machine is connected with an inflator. This is our new technology (Patent No. ZL200420060968.5). It uses particular stainless steel, foldable column, to dehydrate and degas. This design can get good separation effect by the three-dimensional evaporation when there is enough time for oil falling.
2) It uses new-type heating equipment (Patent No. ZL02276238.8) with low heating load is to prevent oil from ageing.
3) Since there are high water content in turbine oil, ZJC-T oil treatment machine uses water-ring vacuum pump.
4) There is photoelectric switch to control oil level with sensitive and precise features (even. foams can be sensed). So there is no possibility of oil-spraying (spray-free Patent No. ZL200420060973.6) .
5) It uses high-viscosity oil feed pump which has special sealing treatment. It is free from oil leakage, low noise and long lifetime.
6) The multi-stage filters and be china-made or Italy-made for different kinds of oil as your required. Which remove particles and cleanness up to NAS grade 6.
3. Parameters of Used Turbine Oil Recycling Equipment
Item |
Parameter |
Unit |
ZJC0.6KY-T |
ZJC1.2KY-T |
ZJC1.8KY-T |
ZJC3KY-T |
ZJC6KY-T |
ZJC9KY-T |
ZJC12KY-T |
ZJC18KY-T |
Technical Parameter |
Flow Rate |
L/H |
600 |
1200 |
1800 |
3000 |
6000 |
9000 |
12000 |
18000 |
Working Vacuity |
Mpa |
-0.07~-0.101 |
Working pressure |
Mpa |
≤0.35 |
Temperature Range |
oC |
45-65 |
Power Supply |
|
50Hz 380V 3-Phase 4-Wire |
Total Power |
KW |
6+1.5 |
9+1.5 |
12+1.5 |
30+3 |
2x30+4.4 |
3x30+6 |
3x30+7 |
4x30+11 |
Inlet/Outlet Diameter |
mm |
32/25 |
38/32 |
44/38 |
48/44 |
64/48 |
76/64 |
Size
|
Length |
mm |
1300 |
1300 |
1300 |
1900 |
1900 |
2100 |
2200 |
2300 |
Width |
mm |
1000 |
1050 |
1050 |
1400 |
1400 |
1500 |
1600 |
1700 |
Height |
mm |
1250 |
1450 |
1450 |
1950 |
2100 |
2150 |
2250 |
2300 |
Weight |
Kg |
320 |
380 |
450 |
850 |
1100 |
1500 |
2000 |
2900 |
Oil Treatment Index |
Water Content |
ppm |
≤50 |
Kinematic Viscosity |
m/s |
≤20% in comparison to the original bias value of new oil |
Demulsibility |
min |
≤15 |
Filtering Accuracy |
µm |
≤5 |
Cleanness |
NAS |
≤ Grade 6 |
Oil Appearance |
|
Transparence |
According to your financial budget and requirements on purified oil, you can choose our ZJC-T vacuum oil purifier (dehydrate by vacuum distillation) or JT online coalescing dehydration oil purifier (dehydrate by special filters) or DYJC online oil purifier (combined function of ZJC-T and JT to dehydrate by both vacuum distillation and special filters).
Contact us now to discuss your oil condition and get our professional solution.
4. Company Information
Founded in 1997, our company Yuneng has been specialized in designing and manufacturing a series of oil purifier for nearly 20 years, such as transformer oil purifier, air pumping unit, dry air generator, turbine oil purifier, lubricating oil purifier, fire-resistance oil purifier, (EHC oil) , waste oil regeneration machine and etc. The proud history makes Yuneng top supplier in oil purification field in China.
We are also the supplier of the Big Transformer Company TBEA in India, hope we could also be your supplier in the near future.
If you are interested in our products, please get back to me for more details.Thank you.
5. After-Sales Service
One year guarantee for product quality. (People damaged parts are charged).
Lifelong maintenance and spare parts supply.
Free design of fixtures as customers required.
Free training for machines installation and operation of the staffs.
Consumable Material & After-sales Service
We take full advantage of our years of experience (since 1997) in oil filtration filed to supply reliable machine. Special engineered design features, top-quality components and workmanship ensure years of maintenance-free operation and performance.
Usually the only consumable material of the machine is the filter elements. All other parts or elements seldom have problem because of high and stable quality.
We will send engineers to your city for after sales service within 2 weeks after machine arrived at your site.
If any problem, we will supply replacing parts or send engineer to your site (free within warranty period, charge reasonably beyond warranty period).
6. Yuneng products list:
1. Insulation/Transformer Oil Purification Series
2. Turbine Oil Filtration machine
3. Lubricating Oil Filtration machine
4. Other kinds of oil filtration machine
KYJ fire-resistance oil filtration machine (EHC oil)
LY plate-frame pressure oil filtration machine (simple, paper filtration)
YL mobile oil filtration machine (simple, cheap)
5. Waste oil recycling machine
YNZSY used oil recycling machine (by chemicals)
YNZSY-LTY used tire oil recycling machine (by chemicals)
Waste oil distillation machine
Waste Lube Oil to Fuel Oil
Chongqing Yuneng Oil-Filter Manufacturing Co., Ltd. is a new and high-tech joint-stock enterprise established on the basis of the former Chongqing Yuneng Oil-Purifier Factory. Our company, covering an area of about 14, 500 square meters, specializes in the R&D, manufacture, and marketing of oil, water and gas filtering and purification products and complete sets of related equipment. We gather a group of specialized talents with years of working experience and technological development. Now we have 228 employees, and 60% of them have received an educational background at or above the junior college level. We can produce 1, 000 sets of oil-filtering equipment and purification equipment for other fluids every year. We are one of the world competitive companies specializing in high-tech oil purifier research and manufacture.
We attach great importance to product quality, specialization, dedication and constant improvement. Aiming to become a world-advanced manufacturer of oil treatment equipment, we have always upheld the development philosophy centering on "technological innovation and service improvement". We have passed ISO quality management certification. Besides, ten of our new technologies have received national patents of invention and five of our oil purifier series have been granted the title of "new and high-tech products of Chongqing". In 2004, our company was rated as a new and high-tech enterprise of Chongqing. In addition, with the support and help of the Chongqing Commission of Science and Technology, our company implemented EPR information management system in 2006. All these lay a solid foundation for our company to provide customers with high-quality reliable products and fast and comprehensive service to avoid homogenous competition on quality improvement.
Over the past 20 years, we have always stuck to the operational concept of "being faithful and dedicated, practical in development, and cooperative for common progress". By working in a down-to-earth manner and orientating ourselves to customer needs, we have received the recognition of a lot of customers. So far we have sold over 15, 000 sets of Yuneng-brand oil purifiers, which are widely used in electric, metallurgical, petrochemical, mechanical, military industry, railway, light industry, and other industries. Our products enjoy a fairly big market share and have become a famous brand in medium- and high-grade oil treatment equipment.
According to the long-term development objective of the Group, we set up a new company called Chongqing Xingao Electromechanical (Group) Co., Ltd. The new Group will continue to seek innovation and dedicate itself to the research and manufacture of high-end oil treatment technologies. It will also seek diversified development to cover the manufacture of water and gas purification equipment and filtering consumables as well as the assembly of electro-mechanical and environmental protection equipment, so as to realize the goal of making strong main business while making the company bigger as a whole. We are ready to do our part to develop national industries, save energy and protect the environment.
We are looking forward to cooperating with you.
