Speciation:
1. Grade: N33-N52,33M-48M,33H-48H,30SH-45SH,30UH-38UH and 30EH-35EH;
2. Maximum Working temperature: 60°C to 200°C
3. Shape: Arc, Block, Bar, Ring, Cube, Disc, or others.
Characteristics:
High remanence, high coercive force, high energy product, high performance, high cost ratio
Type:
Sintered NdFeB magnet
Bonded NdFeB magnet
Surface Treatment Method:
| Type | Information |
| Metallic | Zinc, Nickel, Nickel+Nickel, Copper+Nickel, Nickel+Copper+Nickel, Gold, Sliver |
| Organic | Epoxy, Nickel+Epoxy coating |
| Temporary | Surface Passivation |
NdFeB(Neodymium-Iron-Boron) magnet is used most popular by people in industry and our daily life, because it has superior magnetic properties than other kind of magnets. The outstanding characteristics are as follows--------
·Higher unit magnetic properties than other magnet and assure you of smaller size and lighter weight in designing devices.
·Being mostly an iron based alloy, NdFeB type rare earth magnet is much more prone to surface oxidation or rust. To eliminate such a problem, the user should consider magnet coating, plating, or suitable surface treatment.
·Being less prone to chipping during handing
·Lower temperature coefficient of magnetic properties than ceramic but higher than SmCo type rare earth magnet. Therefore, this NdFeB type rare earth magnet will suffer irreversible loss at high temperature.
Packaging & Shipping:
1.AIR PACKAGE: White spacer set between each two magnets for easy separate, then set in polythene bag protecting from water. Next set in carton and magnet surrounded with metal sheet and foam, which used for magnetism shielding.
2.OCEAN PACKAGE: White spacer set between each two magnets for easy separate, secondy set in polythene bag protecting from water, finally cartons packed in pallet which surrounded with film.
AMC is supported by our 19 years of experience in research, production and export. We are now one of the largest suppliers of magnetic material in mainland China. We follow ISO/TS 16949: 2002 guidelines, so we can produce magnets that meet the highest of quality standards. Our magnets are trusted by LG, Braun and Panasonic because we have passed all of their factory audits. We are confident that our magnets will satisfy you and your cusomers too.
We strictly control every production process, including raw material inspection, millig, granularity inspection, pressing, sintering, flux control and final inspection. And our magnets are only made from materials that are RoHS Directive-compliant. We use equipment from the US, Germany and Japan to manufacture up to 1200 tons of ferrite magnet, 200tons of Nedoymium magnets and 1200 tons of rubber magnets monthly. So we are ready for your volume orders. For more information, please get in touch with us today!
