Introduction to the Equipment
Control System
The controller model Delphi is a modern electronic device, made with the newest materials, which is able to do, in a totally automatic way, the complete drying cycle required by a large number of timber groups. The project of this system has been realized in order to couple the most advanced functions with the easiest simplicity of use: there is one special key for each function that can be recognized by a symbol. Furthermore, to simplify the operations, a new system based on chip-cards has been introduced, which allows the user to record on cards the most used programs, personalized according as the type of kiln dryer and the timber group, which can be set up on the machine only by inserting the card into the card reader.
Technical Specifications:
Measurement and Control Range of Temperature: 0-100ºC
Measurement and Control Range of Humidity: 3-30%
Measurement Range of Moisture Content of Wood: 4-80%
Heating System
The heating system is composed of electromagnetic heating valve, bimetallic (stainless steel/aluminum) ribbed heat-exchanger coils, cut-off valve and piping.
The heating system can meet different drying requirements from medium-low temperature schedule to medium-high temperature schedule with its strong heating power.
Spray System
The spray system is composed of spraying valve, pressure pump, stainless steel spray pipe.
The spray pipe is made by stainless steel so that the carbon steel pipe's drawbacks of heavy corrosion and short service life can be effectively avoided.
Air Circulating System
The optimum model of kiln is adopted with circulating fans located on the upper side of the kiln. The No. 8 fan is aluminum molded with big air volume and high efficiency. The electrical power for a single fan is only 3.0Kw so that the energy consuming and the drying cost can be substantially lowered. As the symmetrical blades can ensure the same amount of the air volume and the air pressure no matter the fan is in normal direction of rotation or in contra rotation, the reversible fan guarantees the uniformity of air velocity and air temperature at the cross sections of the stack so that the uniformity of the wood moisture content at the cross section of the stack is greatly improved.
The ceiling is built using LF21 anti-corrosion corrugated aluminum panel that its strength, stiffness and corrosion resistance are substantially improved.
Venting System
To realize the fully modulating operation, the aluminum air dampers are controlled by the vents actuator via the driving mechanism and the vents actuator in turn is controlled by the main control system.
Kiln Door System
The popular one-piece sliding aluminum alloy doors are furnished. The door has a welded steel framework with a double insulation using polystyrene. The door is sealed with custom-tailored special-shaped rubber tube which is heat-resisting, anti-aging and highly airtight.
Besides sliding on the top track the door carrier is also supported by a floor rail, which ensures it operate easily, smoothly and steadily.
Payment Terms
The Buyer should pay to Seller 30% of the total price as the deposit when this contract comes into effect.
The Buyer should pay to Seller 70% of the total price with in three days after shipment against BL.
Date of Shipment
Shipment shall be effected within 30 days from the date of the Seller's receipt of the Buyer's deposit.
After-Sales Service
Installation and Trial Run
Our engineers and technicians coordinating with the User's personnel shall complete all installation and shall be responsible for the trial run until all equipment run well.
Technical Training
We shall train the kiln drying operators for Users free of charge on site or in our company. The experts from the Institute of Drying Technology shall give lessons in drying mechanism and operating rules to make the operators have a real grasp of the wood drying technology and be skilled in wood drying.
Maintenance and Technical Service
1. We shall give prompt maintenance service to our Users by email and phone.
2. We shall provide spare parts at the best price.
3. We shall provide free latest wood drying technology for our Users and can provide particular technical service according to User's individual requirements.
Anhui Forwood Drying Equipment Co., Ltd is located at Xuancheng city, which is founded in 2010.
Forwood company is the provider of wood dryimng equipment with great advantages. It is joint-stock system with efficient producing and managing mechanism. The main product are srying equipment for wood and bamboo, and wood thermal treating equipment(thermally modified wood equipment).
Forwood can provide the trial and the lecture in wood drying and wood science, provide the drying schedule for many different types wood, help the user to skill control the equipment, finish the drying of the wood to reduce lost during the drying process.
Design and Produce
In order to realize the mordern management, Forwood not only produce the normal products, but also can design the special ones according to customer's requirement. The whole system will be produced and installed strictly and elaborately, so that will have the better quality, long service life and easily being operating.
Made-to-measure to meet your requirements
No matter how much timber you need to dry at one go, say from 30 m³ Till 200 m³ , Forwood will always have the most suitable kiln for you.
Main technology of drying kilns
Automatic and semiautomatic system
Kiln housing can be all-aluminum or concrete and brick structure
The folio doors and hanging doors are high airtight, opened and closed flexibly and easily.
The handing of wood is completed by forklift or the sliding vehile with floor rail
Energy source of wood drying kilns can be steam, hot water, hot oil, gas, and electricity
All-aluminum kiln housing is composed of covering panels, insulating layers, columns and trusses, inner and outer coverings are both aluminum panels. Insulating layer is made of fiber glass. The material of column and truss is special shaped aluminum
To meet the cold climate in Russian, the thickness of the kiln roof is up to 250mm which can stand the snowload of 300~400kg/m2, the thickness of the kiln walls is 150mm, which can guarantee the normal operation during the temperature of -30~-50 degrees celsius.
Installing and Trail
The equipment will be installed under tha supercising from Forwood, no matter where will be used.
New technology and Product
Forwood will develop new drying equipment for wood and bamboo, and also the drying equipment and technology in other fields.
To make sure that we offer you the project that is the most suitable for the need of your company, our experienced engineers will analyze your situation--considering your drying requirement, engergy supply situation and the space situation. And then, we work out the best project report for you. We will be responsible for the whole project.
Just give us a call, or write to us, we welcome you to visit our company!
