12V 12.5A Waterproof LED Power Supply

12V 12.5A Waterproof LED Power Supply 
· High efficiency, high reliability, low cost
· Universal AC input / full range
· 100% full load burn-in test
· Protections: Short circuit/ Over load/ Over voltage
· Forced air cooling by built in DC fan
· Built-in cooling Fan ON-OFF control
· 1 year warranty
· Dimensions: 215*115*50mm(L*W*H)
Specification
1)INPUT
· Voltage Range: 90~132 VAC/180~264VAC47~63 Hz; Selected by switch 254~370VDC
· AC Current: 5.5A/115 V 3.5A/ 230 V
· Efficiency: 74%(HS-250T-5); 76%(HS-250T-7.5); 78%(HS-250T-12); 79%(HS-250T-13.5);
78%(HS-250T-15); 82%(HS-250T-24); 82%(HS-250T-27); 83%(HS-250T-48);
· Inrush Current: 25A/115V50A/230V
· Leakage Current: <3.5 mA/240VAC
2)PROTECTION
· Over Load: 105%~135% Protection type: Hiccup mode, recovers automatically after fault condition is removed.
· Over Voltage: 115%~135% Protection type: Hiccup mode, recovers automatically after fault condition is removed.
· Over Temp: RTH3≥ 45º CFAN ON ≤ 40º CFAN OFF, ≥ 85º Coutput shutdown
3)ENVIRONMENT
· Working Temp., Humidity: -10º C~+50º C; 20%~90 %RH
· Storage Temp., Humidity: -20º C~+85º C; 10%~95 %RH
· Vibration: 10~500Hz, 2G 10min. /1cycle, period for 60min, each along X, Y, Z axes
4)SAFETY AND STANDARD
Withstand Voltage: I/P-O/P: 1.5KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC
· Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC
· Safety Standard: Design refer to UL1950
· EMC Standard: Design refer to EN55022, EN55024, EN61000
5)OUTPUT
Model HS-250-5 HS-250-7.5 HS-250-12 HS-250-13.5 HS-250-15 HS-250-24 HS-250-27 HS-250-48
DC Voltage 5V 7.5V 12V 13.5V 15V 24V 27V 48V
Voltage Tolerance ± 2% ± 2% ± 1% ± 1% ± 1% ± 1% ± 1% ± 1%
Rated Current 40A 30A 20A 18.5A 16.6A 10A 9.3A 5.2A
Current Range 0-40A 0-30A 0-20A 0-18.5A 0-16.6A 0-10A 0-9.3A 0-5.2A
Rated Power 200W 225W 240W 250W 249W 240W 251W 250W
Ripple & Noise 120 mVp-p 120 mVp-p 150 mVp-p 150 mVp-p 150 mVp-p 150 mVp-p 200 mVp-p 240 mVp-p
DC Adjustment Range -10%, +12%, ± 20%, -16%, +10%, -12%, +11%, -10%, +20%, -16%, 10%, -4%, +18% -15%, +17%
Setup, Rise, Hold Time 200ms, 50ms, 20ms

Model                                    Specification	S-100-3	S-100-5		S-100-7.5		S-100-12	S-100-15	S-100-24	S-100-27	S-100-48
DC output voltage	3V	5V		7.5V		12V	15V	24V	27V	48V
Output voltage range	±2%	±2%		±1%		±1%	±1%	±1%	±1%	±1%
Rated output current	20A	20A		13.6A		8.5A	6.7A	4.5A	3.7A	2A
Output current range	0-20A	0-20A		0-13.6A		0-8.5A	0-6.7A	0-4.5A	0-3.7A	0-2A
Wave and noise	100mVp-p	100mVp-p		100mVp-p		100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p
Inlet stability	±0.5%	±0.5%		±0.5%		±0.3%	±0.3%	±0.2%	±0.2%	±0.2%
Load stability	±0.5%	±0.5%		±0.5%		±0.3%	±0.3%	±0.2%	±0.2%	±0.2%
DC output power	60W	100W		102W		102W	100.5W	108W	99.9W	96W
Efficiency	70%	78%		80%		81%	81%	84%	84%	84%
Adjustable range for DC voltage	2.85~3V	4.75~5.5V		6.75~8.25V		10.8~13.5V	13.5~16.5V	21.6~26.4V	26~32V	43.2~52.8V
AC input voltage range	85~132VAC/180~264VAC selected by switch 47~63Hz;255~370VDC
Input current	2.4A/115V 1.2A/230V
AC inrush current	Cold-start current 30A/115V 60A/230V
Leakage current	<1mA/240VAC
Overload protection	105%~150%		150%~200%		105%~150%
	Type:Output shutdown  Reset:auto recovery
Over-voltage protection	^^^^^^^
High-temperature protection	^^^^^^^
Temperature coefficient	±0.03%/C(0~50C)
Setup, rise, hold up time	200ms, 100ms, 30ms
Vibration	10~500Hz, 2G 10min,/1cycle, Period for 60min, Each axes
Withstand voltage	Input and output internal:1.5KvAC, Input and enclosure: 1.5KvAC,Output and enclosure:0.5KvAC
Isolation resistance	Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ
Working temperature and humidity	-10C~+60C, 20%~90%RH
Store temperature and humidity	-20C~+85C, 10%~95%RH
Overall dimension	199×98×38mm
Weight	0.65Kgs

Besides the power supply, we supply a series of LED products as below: