10 Tons Scrap Used Plastic Pyrolysis Equipment

Scrap Used Plastic Pyrolysis Equipment



1)Overview of pyrolysis plant


The two keys of pyrolysis plant are reactor and cooling system.
Reactor directly decides the machine's safety and service life. It is made by welded steel plate. So the quality of welding will have a direct impact on safety and service life. Therefore, we use automatic welding machine, X rays detection and heating treatment which will not only guarantee the quality of welding but also greatly improve working efficiency.
For cooling systems, there are two steps. Cooling pipe is the first step. The second is condenser. We have three condensers. And there are 57 pipes in one condenser. Diameter is 48mm for one small pipe. The heat exchanging area is about 13square meters for one condenser. So the total cooling area is about 40 square meters, which will guarantee you a high oil yield.



2)Main features:


1. With an auto welding machine for the reactor, it can not only greatly improve working efficiency but also guarantee the quality of welding seam, thus avoid explosion caused by gas leak.
2. Professional heating treatment and x-ray detection chamber are especially for welding.
3. Vacuum system will prevent oil gas from going back to reactor and causing accident.
4. Professional thermometer, pressure gauge and safety valve.
5. It is dangerous to burn exhaust gas(C1 to C4) without any safety measures. In our process, it is transferred first through the safety device and a safety burning air muzzle. Before burning, we should ensure the safety of production.


Environment friendly:

1. Well water dedusting system can avoid black smoke.
2. The exhaust gas will be recycled for heating reactor, no gas pollution
3. Every junction of the reactor is in good sealing situation with professional sealing material.
Long service life:
1. Material: Q245R special steel plate, thickness 14mm.
2. Welding: Automatic welding machine with heating treatment and x-ray detection will prolong the service life of reactor to the max.
3. The service life of the reactor will be 8 -10 years
Energy saving:
1. Well sealing for heating system, no gas leak and saving fuel.
2. The exhaust gas will be recycled for reactor heating.



Main parts of the machine:

(1)Feeding-in system:
The raw material can be waste tyres, rubbers or plastic. If your raw material is plastic, we suggest
That you use the belt conveyor. If your raw material is waste tyres, we suggest that you use autofeeder.


(2)Pyrolysis system:
The reasonable thickness, it is easy to heat and easy to be cool down.


(3)Heating system:
There are various kinds of fuel, such wood, charcoal, coal, LPG etc.


(4)Dedusting system:
They usually have one or two equipments for dedusting, We the three, desulfurization scrubber,
Water film cyclon and the advanced bag dedusting.


(5)Impurities removing system:
There are two devices for removing the impurities from the oil gas, one is gas seperate
Tank, The other is depositing tank.


(6) Cooling system:
We have the new design for the cooling system, It has better cooling effect and high oil yield.


(7)Oil Store system: For store the oil.


(8)Waste gas recycling system:
It is also named water seal, it has two effects


(9)Carbon black discharging system:
The carbon black is coming out automatic, there also has a screw conveyor for removing the carbon black.



We have a working site in our factory, if you have inerest in this product, please contact us directly for more details.