Performance
Physical properties: high insulation resistance, breakdown, high temperature resistance, abrasion resistance, high strength (three meters altitude fall not broken)
Fire rating: USA military standard MIL-F-51058 (the highest level)
Typical application: strong current, voltage, strong high temperature parts, IC MOS, IGBT power tube heat pipe insulation
Certification: natural organic matter, the European Union, exempt products without certification materials
Thermal conductivity: high temperature: 1600 degrees below the ideal heat insulating material of high voltage and high frequency equipment
Application:
Alumina ceramic is mainly used in large power equipment, IC MOS tube, IGBT chip heat conducting insulation, high frequency power supply, communication, mechanical equipment, strong current, high voltage, high temperature and other thermal heat insulation parts need products.
Physical properties: high thermal conductivity, high voltage insulation resistance, high temperature resistant, abrasion resistant, high strength
Product specifications:
Regular size and models :
The TO-220, 1mm*13mm*19mm
The TO-3 P, 1mm*20mm*25mm
The TO-264, 1mm*22mm*28mm
The T0-247, 0.635mm*17mm*22mm
Other non-standard products can provide drawings of custom processing
TO-220 INSULATION PARTICLES PROPERTIES TABLE |
Test Iterm |
Test Data |
Testing Tool |
Unit |
Reference Standard |
Color |
White |
Visual(Color Box) |
- |
Visual |
Specific Gravity |
1.13±0.1 |
Hydrometer |
kg/cm2 |
ASTMD792 |
Hardness |
120±5 |
Hardness(Ball) |
shore |
ASTMD2240 |
Breakdown Voltage |
>=2.0 |
Pressure Tester |
kv/mm |
ASTMD149 |
Continuous use Temp |
50±220 |
Industrial Refrigerator/oven |
c |
EN344 |
Water Absorption Rate |
1.20% |
|
|
|
Shenzhen Ailiston Tec. Co., Ltd., is the manufacturer for thermal conductive pad.
It's gap filled with high-performance thermal conductivity material. Mainly used in electronic device and heat sinks or product transfer interface between the enclosure. It has a good adhesive flexible, good compression performance and excellent thermal conductivity. So that it can be fully in use of electronic originals and the air discharge between the heat sink in order to achieve access to the full. Heat effect increased significantly. It also has a certain degree of self-adhesive, compared to ordinary thermal insulation material in the product installation process has brought great convenience, easy off, easy to operate.
It's widely use for the communications equipment, computer, swithing power suppply, DVD and etc.
The basic specification is: 200mm*400mm thickness is 0.5mm-15mm. (for each dimension need to add 0.5mm, such as 0.5; 1; 1.5; 2^. Up to 15mm).
Regarding the demension and col. We could cut it as the customers' requiest. If you have any questions pls don't hesitate to contact to us.
