12V 12.5A Waterproof LED Power Supply
· High efficiency, high reliability, low cost
· Universal AC input / full range
· 100% full load burn-in test
· Protections: Short circuit/ Over load/ Over voltage
· Forced air cooling by built in DC fan
· Built-in cooling Fan ON-OFF control
· 1 year warranty
· Dimensions: 215*115*50mm(L*W*H)
Specification
1)INPUT
· Voltage Range: 90~132 VAC/180~264VAC47~63 Hz; Selected by switch 254~370VDC
· AC Current: 5.5A/115 V 3.5A/ 230 V
· Efficiency: 74%(HS-250T-5); 76%(HS-250T-7.5); 78%(HS-250T-12); 79%(HS-250T-13.5);
78%(HS-250T-15); 82%(HS-250T-24); 82%(HS-250T-27); 83%(HS-250T-48);
· Inrush Current: 25A/115V50A/230V
· Leakage Current: <3.5 mA/240VAC
2)PROTECTION
· Over Load: 105%~135% Protection type: Hiccup mode, recovers automatically after fault condition is removed.
· Over Voltage: 115%~135% Protection type: Hiccup mode, recovers automatically after fault condition is removed.
· Over Temp: RTH3≥ 45º CFAN ON ≤ 40º CFAN OFF, ≥ 85º Coutput shutdown
3)ENVIRONMENT
· Working Temp., Humidity: -10º C~+50º C; 20%~90 %RH
· Storage Temp., Humidity: -20º C~+85º C; 10%~95 %RH
· Vibration: 10~500Hz, 2G 10min. /1cycle, period for 60min, each along X, Y, Z axes
4)SAFETY AND STANDARD
Withstand Voltage: I/P-O/P: 1.5KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC
· Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC
· Safety Standard: Design refer to UL1950
· EMC Standard: Design refer to EN55022, EN55024, EN61000
5)OUTPUT
Model HS-250-5 HS-250-7.5 HS-250-12 HS-250-13.5 HS-250-15 HS-250-24 HS-250-27 HS-250-48
DC Voltage 5V 7.5V 12V 13.5V 15V 24V 27V 48V
Voltage Tolerance ± 2% ± 2% ± 1% ± 1% ± 1% ± 1% ± 1% ± 1%
Rated Current 40A 30A 20A 18.5A 16.6A 10A 9.3A 5.2A
Current Range 0-40A 0-30A 0-20A 0-18.5A 0-16.6A 0-10A 0-9.3A 0-5.2A
Rated Power 200W 225W 240W 250W 249W 240W 251W 250W
Ripple & Noise 120 mVp-p 120 mVp-p 150 mVp-p 150 mVp-p 150 mVp-p 150 mVp-p 200 mVp-p 240 mVp-p
DC Adjustment Range -10%, +12%, ± 20%, -16%, +10%, -12%, +11%, -10%, +20%, -16%, 10%, -4%, +18% -15%, +17%
Setup, Rise, Hold Time 200ms, 50ms, 20ms
Model Specification | S-100-3 | S-100-5 | S-100-7.5 | S-100-12 | S-100-15 | S-100-24 | S-100-27 | S-100-48 |
DC output voltage | 3V | 5V | 7.5V | 12V | 15V | 24V | 27V | 48V |
Output voltage range | ±2% | ±2% | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
Rated output current | 20A | 20A | 13.6A | 8.5A | 6.7A | 4.5A | 3.7A | 2A |
Output current range | 0-20A | 0-20A | 0-13.6A | 0-8.5A | 0-6.7A | 0-4.5A | 0-3.7A | 0-2A |
Wave and noise | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p |
Inlet stability | ±0.5% | ±0.5% | ±0.5% | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% |
Load stability | ±0.5% | ±0.5% | ±0.5% | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% |
DC output power | 60W | 100W | 102W | 102W | 100.5W | 108W | 99.9W | 96W |
Efficiency | 70% | 78% | 80% | 81% | 81% | 84% | 84% | 84% |
Adjustable range for DC voltage | 2.85~3V | 4.75~5.5V | 6.75~8.25V | 10.8~13.5V | 13.5~16.5V | 21.6~26.4V | 26~32V | 43.2~52.8V |
AC input voltage range | 85~132VAC/180~264VAC selected by switch 47~63Hz;255~370VDC |
Input current | 2.4A/115V 1.2A/230V |
AC inrush current | Cold-start current 30A/115V 60A/230V |
Leakage current | <1mA/240VAC |
Overload protection | 105%~150% | 150%~200% | 105%~150% |
| Type:Output shutdown Reset:auto recovery |
Over-voltage protection | ^^^^^^^ |
High-temperature protection | ^^^^^^^ |
Temperature coefficient | ±0.03%/C(0~50C) |
Setup, rise, hold up time | 200ms, 100ms, 30ms |
Vibration | 10~500Hz, 2G 10min,/1cycle, Period for 60min, Each axes |
Withstand voltage | Input and output internal:1.5KvAC, Input and enclosure: 1.5KvAC,Output and enclosure:0.5KvAC |
Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ |
Working temperature and humidity | -10C~+60C, 20%~90%RH |
Store temperature and humidity | -20C~+85C, 10%~95%RH |
Overall dimension | 199×98×38mm |
Weight | 0.65Kgs |
Besides the power supply, we supply a series of LED products as below:
Foshan Nanhai Yike Electro Mechanical Die Casting Factory(Wosin Trading Co., Ltd. ) is a lead manufacturer and exporter of various die castings and roofing sheets, which is located in FOSHAN, just about 10 kilometers to Guangzhou and about 150 kilometers to Shenzhen. Convenient location, consummate facilities and aborative service will return you for satisfactory goods and considerable benefits.
The manufacture of products from brass, aluminum alloy, and zinc materials (Radio communication parts, Auto parts, Architectural hardware, household appliance parts, Plumbing fittings, Electrical components, Power components, Decorative metal fittings, etc. )
We have a full lineup of die cast machines from 168ton to 1, 000ton.
We also have many materials, principally aluminum, along with brass and zinc.
In addition, in recent years we have achieved the results to provide a material that meets the environmental regulations.
We have introduced CNC 3D measuring machines and are fully equipped for the inspection of large-sized parts, which requires great precision.
Manufacturing the always stable high quality product is possible in our company which is performing from a plan to die making, casting, processing, and a surface treatment.
Meanwhile, Wosin Trading Co., Ltd. is oversea department of Foshan Nanhai Yike Electro Mechanical Die Casting Factory, which is also doing the export of roofing materials from 3-layer UPVC roofing sheet, Synthetic resin roofing sheets, APVC anti-corrosion roof sheet, PVC corrugated sheets, and some other PPGI roofing sheets etc to all over the world.
We have earned great reputation from our oversea buyers and have their trust to the best level. We believe your success is our business! ! We look forward an opportunity to serve your companies needs.