12V 220V 50Hz 5000W MPPT Inverter with wheels
Key features:
To inverter:
High overload ability up to 300% rated power (20 sec)
Low voltage trip selectable (9.5V/10V or 10V/10.5V) extracting max power from various batteries with different protection
Low quiescent current, power saver mode to reduce power consumption to 10W (3 sec sensing cycle)/3W (30s sensing cycle)
DC13V battery recover point, dedicated for solar systems
To solar charger:
MPPT function with high efficiency 97%
Auto input DC voltage detect between 12V/24V
Reverse current protection, battery temperature compensation
To battery charger:
3 step intelligent battery charging (bulk, absorption, and float)
8 pre set battery type (flooded lead acid, gel, or absorbed glass mat (AGM) batteries) selector plus de-sulphation for totally flat batteries
Powerful charge rate up to 90A, selectable from 0-100%
PFC (Power Factor Correction) for charger, less power consumption than conventional units
To transfer:
10ms typical transfer time between battery and AC, guarantees power continuity
15s delay before transfer when AC resumes, extra protection for loads when used with generator
Input AC voltage range selectable (184-253V or 154-253V) for different kinds of loads
30/40A through current ability
Allows start up and through power with depleted batteries
To remote control & others:
Ability to switch the unit on/off, select/deselect power saver mode
17 alarms/warnings, informative for easier operation and trouble-shooting
Front panel LED indicators and adjustable switch selectors
Battery/AC priority switch available for off grid solar/wind system
Low battery, overload, and high battery, over temperature protection circuitry
RS232/USB communication port available
Generator compatible
| General specifications: |
| Input wave form: | Sine wave(Utility or generator) |
| Nominal voltage: | 120VAC | 230VAC |
| Low voltage trip: | 90V+/-4% | 184V/154V+/4%- |
| Low voltage re engage: | 100V+/-4% | 196V/164+/-4% |
| High voltage trip: | 140V+/-4% | 253V+/-4% |
| High voltage re engage: | 135V+/-4% | 243V+/-4% |
| Max input AC voltage: | 150VAC | 270VAC |
| Nominal input frequency: | 50Hz or 60Hz(Auto detect) |
| Low frequency trip: | 47Hz for 50Hz, 57Hz for 60Hz |
| High frequency trip: | 55Hz for 50Hz, 65Hz for 60Hz |
| Output wave form: | (Bypass mode) same as input |
| Overload protection: | Circuit breaker |
| Short circuit protection: | Circuit breaker |
| Transfer switch rating: | 30 amp or 40 amp |
| Efficiency on line transfer mode: | 95%+ |
| Line transfer time: | 10 ms typical |
| Bypass without battery connected: | Yes |
| Max bypass current: | 30 amp or 40 amp |
| Bypass over load current: | 35 amp or 45 amp: alarm |
| Inverter specification/output |
| Output wave form: | Pure sine wave |
| Output continuous power watts: | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 |
| Output continuous power VA: | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 |
| Power factor: | 0.9-1.0 |
| Nominal output voltage rms: | 120/230VAC |
| Output voltage regulation: | +-/10% rms |
| Output frequency: | 50Hz+/-0.3Hz or 60Hz+/-0.3Hz |
| Nominal efficiency: | >88% |
| Surge ratings: | 3000 | 6000 | 9000 | 12000 | 15000 | 18000 |
| Short circuit protection: | Yes, fault after 1 sec |
| THD | <3% |
| Inverter specification/input: |
| Nominal input voltage: | 12.0V | 24.0V | 48.0V |
| Minimum start voltage: | 10.0V | 20.0V | 40.0V |
| Low battery alarm: | 10.5V/11.0V | 21V/22.0V | 42.0/44.0V |
| Low battery trip: | 10.0V/10.5V | 20.0V/21V | 40.0V/42V |
| High voltage alarm: | 16.0V | 32.0V | 64.0V |
| Low battery voltage recover | 15.5V | 31.0V | 62.0V |
| Power saver: | Below 25 watts when enabled |
| Power saver: | Same switched on/off on remote |
| Charger mode specifications: |
| Input voltage range: | 90-135VAC | 194-243VAC/164-243VAC(W) |
| Output voltage: | Dependent on battery type |
| Max charger current: | 35A/70A (Charger current controller) |
| Batteryinitial voltage for start up: | 10-15.7V for 12V(*2 for 24V; *4 for 48V) |
| Over charger protection shutdown: | 15.7V for 12V(*2 for 24V; *4 for 48V) |
| Solar charger mode specifications: |
| Rated voltage | 12V/24V/48V |
| Rated charge current | 40A/60A |
| Rated output current | 15A |
| Self consumption | <10mA |
| Bulk charge | 14.5V(default)*2 for DC24V, *4 for DC48V |
| Floating charge | 13.5V(default) |
| Equalization charge | 14.0V(default) |
| Over charge disconnection | 14.8V |
| Over charge recovery | 13.6V |
| Over discharge disconnection | 10.8V(default) |
| Over discharge reconnection | 12.3V |
| Temperature compensation | -13.2mV/'C |
| Ambient temperature | 0-40'C(full load), 40-60'C(derating) |
| Mounting | Wall mount |
| Charger curves (4 stage constant current) battery types |
| 4 steps digital controlled progressive charge |
| Batterytype: | Fast V | Float V(*2 for 24V; *4 for 48V) |
| GEL U.S.A. | 14.0 | 13.7 |
| A.G.M. 1 | 14.1 | 13.4 |
| A.G.M. 2 | 14.6 | 13.7 |
| Sealed lead acid | 14.4 | 13.6 |
| GEL Euro | 14.4 | 13.8 |
| Open lead acid | 14.8 | 13.3 |
| Calcium | 15.1 | 13.6 |
| De-sulphation | 15.5 for 4 hrs |
| Remote control/RS232/USB | Yes, optional |
| Size: in mm | 1000/2000/3000 model: 580*315*300 mm3 |
| 4000/5000/6000 model: 740*315*300 mm3 |
| Gross weight: | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 |
| 23Kg | 25Kg | 29Kg | 40Kg | 50Kg | 50Kg |
Pocasa Electronic Limited has been engaged in development, manufacturing and sales of highly reliable and cost-effective uninterruptible power supplies (UPS) including low frequency online UPS, high frequency online UPS and pure sine wave inverter and modified sine wave inverter for global customers.
Production Ability
Nowadays, POCASA manufactures 100, 000PCS of power supplies each month including UPSs, power inverters, stabilizers/AVRs and battery chargers with power levels from 0.5kVA to 400kVA. POCASA optimizes Just in Time (JIT) resource planning and inventory control and supports our customers with minimized lead time and flexible delivery schedule.
Quality Assurance
POCASA's facilities are ISO9001 certified. Our products are also recognized by CE, UL, TUV, CSA, FCC, etc. To assure quality and safety. POCASA's modern facilities incorporate world-class manufacturing capabilities and technologies to produce high quality power supplies.
SMT Systems
Solder paste screen systems
In-circuit auto-test systems
Automated parts storage & retrieval systems
Wave solder systems
Burn-in racks
Automatic test systems
Our Advantages
POCASA will continue to excel towards providing perfect power management solutions. POCASA is confident to be your outstanding provider through:
1) The latest technologies
2) Real-time technology supports from a dedicated and well-trained engineer team
3) Rapid response to pre-sales and after-sales requests
4) A worldwide spread market network
POCASA takes pride in our expertise in offering high quality power supplies to all-purpose applications. You are invited to visit POCASA's plants at any time to see how POCASA designs and manufactures. Also you are encouraged to contact POCASA to obtain professional technology assistance.
