Product Specifications
| Prod Model: |
MTS-P004 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Output Type: |
DC |
| Connection: |
Plug In |
| Usage: |
Laser Power Supply |
Product Description
130W Laser Power Supply adopts high frequency design, top quality IC parts for major parts to ensure high performance and lifetime. 130 W laser power supplies can be used to 100W 150W CO2 laser tube for kinds of industrial laser cutting system, very good compatible and high cost performance.
1. The main features of the 130 laser power supply:
Stable performance:
Each power supply have been much more rigorous testing procedures, under full load high temperature (52~55 degrees celsius) 24 hours of aging, to ensure the stability of each power supply.
Output voltage, current large (AC220V input, the maximum output current up to 40mA, voltage up to 50kv)
Improve the laser power: 2000mm laser tube and supporting the use of peak laser power can reach 150W, the average power of 130W.
Circuit design is reasonable, It's a high-end laser engraving machine, cutting machine the best choice. At the same time, significantly extend the life of the laser tube.
Good compatibility:
Can adapt to a number of manufacturers of CO2 laser tube, but also has strong adaptability and fast response, engraving, cutting effect of a good advantage.
Control is simple:
Select high or low level control, the use of TTL-level control of the laser can start and stop. At the same time increase the protection switch, testing is through the external water and ventilation.
Laser power control is simple, you can use 0 ~ 5V analog signal control the size of the laser power, you can also use the PWM (pulse width modulation) signal to be controlled. * Protection function:
Power supply itself has open circuit protection, a good grounding in the case of protection, the power supply to short-term work in the open state, so to avoid the laser tube burst due to the damage caused by laser power supply, thereby enhancing the laser power supply of life.
Special Features: (optional addition)
Power users do not need to open the shell, you can simply determine the laser power is working to distinguish between the failure of laser tube or power supply failure.
|
Input |
Input Voltage |
AC220V or AC110V (to be specified when placing order) |
|
AC frequency |
47_440HZ |
|
Cold Surge Current |
≤60A (AC220V Input) |
≤30A (AC110 Input) |
|
Current Leakage |
≤0.7mA (AC220V Input) |
≤0.4mA (AC110V Input) |
|
Output |
Maximum Input Voltage |
DC 50KV |
|
Maximum Output Current |
DC 38mA |
|
Efficiency |
≥90Percent (full load) |
|
Mean Time Between Failure (MTBF) |
≥10000H |
|
Response Speed |
≤1ms (from the switch Signal is given to the output current up to 90% of the setting current) |
|
Control Interface |
TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) |
|
Withstand Voltage |
Input-Output, Input-Shell: AC1500V 10mA 60S; Output negative is connected with machine shell. |
|
Protection |
can work in open-circuit condition for a short time (Require a good protective earthing and avoid arc between the positive and the machine shell) |
|
Environment |
Operating Temperature: -10~40°C, Relative Humidity (RH)≤90Percent |
|
Cooling Way |
Force-Air Cooling (FAC) |
|
Dimension |
L×W×H=325*240*95(mm) |
As one of the affiliated companies of Mactron-Tech Group Corporation, Mactron Technology Co., Limited is a modern professional Hi-Tech enterprise, specializing in R&D, manufacturing, marketing of laser light, machinery, laser equipment, riveting, eyeleting, snap fastening equipment etc.
Mactron-Tech is located in the international famous city - Dongguan, Guangdong. With relying on the advantage of Dongguan's light industry, machines and electronic products as well as the advantage of the Pearl River delta multi-information and Hi-Tech talented persons, Mactron-Tech has 2 factories in Dongguan, China and 2 offices at abroad. Strong R&D team and perfect production-line is our power support, We provide advanced equipment and technology, design the production line and supply equipments in accordance to customer requirement. More Important is to provide training and effective after sales services for our end-users. Our reliable equipments and promising services have appreciate by our customers.
Mactron-Tech scopes of supply include:
Laser Equipment Series: Laser Cutting Machine, Laser Engraving Machine, Laser Marking Machine, CO2 Laser Tube, Laser Focus Lens, Laser Reflecting Mirror, Laser Power Supply and accessories etc.
Riveting Equipment Series: Riveting Machine, Snap Fastening Machine, Eyeleting Machine, Shoemaking Machine, Button Machine, Grommet Machine, Orbital Riveting Machine, Cementing Machine, Adhesive Coating Machine, Cutting Machine etc.
Mactron-Tech's business tenet: "Win the market with advanced technology, Redound upon customer with the best service"
Mactron-Tech's managerial spirit: "Solidarity, Exertion, Truthfulness, Innovation"
All in all, your future is our future, and together we will succeed. You are welcome to visit our showroom and factory.
