Product Description
Flexible self- adhesive waterproof material Made by saturating the
base in bitumen,or thermoplastic elastomer(such as styrene butadiene-SBS),reinforced with polyester or fiberglass,finishing the upward face with fine
aluminum foil or polythene membrane etc
.
USE:
1.Clean the substratum: make the substratum clean, non-gungo, non-crack.
2. Paint the surface primer treatment.
3. Spread the membrane according to the construction condition.
4. Seal the half header with sealant.
5. Check the application of the membrane, make sure that there is no bubble, no crack, no crimping.
6. Make the protective layer
Packaging & Shipping
1. bitumen self-adhesive waterproof material packing with strong wood pallet
2. The delivery time is about 7-10 days after receiving the deposit
No. |
Item |
I |
II |
PY |
G |
PY |
G |
1 |
Soluble content(g/m2) ≥ |
3mm |
2100 |
4mm |
2900 |
Test |
No flame |
No flame |
2 |
Heat Resistance |
°C |
90 |
105 |
≤mm |
2 |
Test |
no flow no dripping |
3 |
Low temperature flexibility/°C |
-20 |
-25 |
no crack |
4 |
Impermeability 30minutes |
0.3Mpa |
0.2Mpa |
0.3Mpa |
|
5 |
Tension |
Maximum/(N/50mm) |
500 |
350 |
800 |
500 |
Secondly-Maximum |
|
|
|
|
Test |
no crack no apart |
6 |
Elongation |
Secondly-Maximum≥ |
30 |
|
40 |
|
7 |
Oil Leaking |
Pieces≤ |
2 |