Specifications
1. Product Model: DRO DS 3V/3M/3L/2M/2L/2G/2V;
2. Linear scale model: DLS-M, DLS-W, DLS-B, DMS;
3. Resolution: 0.5um/1um/5um/10um;
Delos Metal shell 2 axis 3axis multifunction digital readout DRO
1. Descriptions:
DS series multifunction DRO
DS-2V/3V Full-featured digital readout DRO(milling machine, boring machine, lathe machine, grinding machine, electronic spark machine)
DS-2L/3L Lathe machine DRO
DS-2M/3M milling machine and boring machine DRO
DS-2G Grinding machine DRO
DS-3E electronic spark DRO
2. Multifunction DRO technical parameter
1)Voltage range: AC 80V-260V/50HZ-60HZ
2)Power dissipation: 20VA
3)Coordinate number: 1/2/3
4)Display: 7 bit display with signed
5)Times frequency: 4X
6)Readout box input signal: TTL, ELA-422-A
7)Input frequency: > 100KHZ
8)Resolution: 10um, 5um, 1um, 0.5um, 0.1um
9)Operating keyboard: Light touch buttons
10)Linear scale Grating space: 0.04mm, 0.02mm, 0.01mm, power supply is +5V. The difference between two and four TTL output signal is 90° .
3. DRO Function introduction
1)Circular drilling function: Digital readout can automatically calculate the location of the hole according to the inputted data
2)Linear drilling function: Opposite to the axis of any angle, only the hole spacing remain fixed value, The DRO can calculate the location of the hole according to the inputted data
3)Tool radius compensation: In the use of cylindrical milling tool carrier, the tool radius must be taken into account. The direction of process will decide the increase or decrease of calculated value. Once the tool number is inputted, the DRO value will be saved.
4)Determine the workpiece center Only through the tool or touching the two points of workpiece, the DRO can calculate the workpiece center
5)200 sets tool base: While repeat the same process in the workpiece, you can store the tool value which will be convenience to the operator
6)Round arc processing: Sample round processing and two axis arc processing
7)Function calculator: Calculator function can improve operation efficiently
8)Slope calculation: Input the two points of workpiece, the DRO can calculate the slope of the workpiece.
9)Z-axis combination calculation: Z-axis can display the combination displacement of two parallel axis
10)Preset value: Preset the radius of workpiece
11)Linear scale error compensation or non-linear scale error compensation: Compensation to ensure absolute precision and maximum efficiency. Multi-point compensation can reduce the machine error.
12)Numerical filtering function
13)EDM depth control: Can assist tool make depth control efficiently
4. DRO Basic functions
1)200 auxiliary zero:
2)gamma calculator (for milling machine);
3)Power-down memory:
4)non-linear error compensation and linear error compensation;
5)Points in the function:
6)Inch / metric mode.
5. DRO Processing functions
1)PCD circular sub-holes (for milling, EDM)
2)Slash punch (for milling machine)
3)Tool compensation function (for milling machine);
4)Taper measurement function (for lathe);
5)Slope processing (for milling machine);
6)R arc function (for milling machine);
7)200 tool magazine (for lathe);
8)EDM functions (for EDM, ordered separately)
9)RS-232 communication (ordered separately).
Delos Electrical Science & Technology Co., Ltd has been devoting himself to the development and realizatoin of high-end exquisite technology, against plentiful talent resources and strong research & development capability, we established industrial clusters which takes new & high-precise electrooptical technology
As the core technology, and formed a complete system of development, production, sales and technology service. We look " persuit excellent, challenge future" as our mission for many years, we collect a lot of advanced technology and experience of progromming improvement, and also have special technology,
Innovation & research development ability, we cooperate with some foreign major companies in this field to draw on their valuable experience and technology to research and develop our new product excellently. Our product's quality and technology both are comform to the National and International's safe standard
And accuracy certificate requirement. Our research field includes: Numerical control system, digital displaying system, machine tool basic measuring system etc.
We have professional technician installament servicer which can meet linear scales & magnetic reconstruction and extra services. At present, our company has various products of linear scales and DRO: Wire cutting linear scale, linear scale for milling machine, grinding machine, lathe and 3 axises EDM,
Which are widely used in milling machine, grinding machine, lathe and EDM etc, we also can produce and supply some special specifictions & models linear scales, magnetic scales as per customer's requirements for some special instruments or machinery facilities. It is available for us to provide the services
Of old machine tool's digital reconstruction, and different brand product's reconstruction & maintenance etc.
We have insisted in the business concepts: Honesty, mutual benefit, Sustainablility, Innoviation, and the policy: Brand service, Excelsior. Using advanced science technology and excellent service, we have dedicated ourselves to high-precise basic measuring instruments to meet industrial demands.
Besides, we work out customized service to help user and customer to achieve their target exactly, and always strive for giving customer satisfied service.
