Product Specifications
| Prod Model: |
24V8.3A |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Output Type: |
Single |
| Output Power: |
101 - 200W |
| Input Voltage: |
Full Range |
| Voltage Regulating Mode: |
Width Modulation Type |
| Connection Mode: |
Parallel Switching Power Supply |
| Starting Mode: |
Self-excited Switching Power Supply |
| Warranty: |
2 Years |
| Power Supplying System: |
Terminal Power Distribution Equipment |
| Certification: |
RoHS |
| Brand: |
Powerwat |
Product Description
200W Switching Power Supply
Features
Universal AC input / Full range
Low leakage current <0.75mA
Protections: Short circuit / Overload / Over voltage / Over temperature
Free air convection for 140W and forced air convection for 200W
Fixed switching frequency at 100KHz
2 years warranty
Specification
AC INPUT VOLTAGE
90~264 VAC, 47~440Hz / 127~370VDC.
POWER FACTOR (Typ. )
PF>0.95/230VAC PF>0.98/115VAC at full load
WORKING TEMP.
Whole series can operate from -20~70 degree, please refer to the derating curves.
WORKING HUMIDITY
20~90% RH non-condensing.
STORAGE TEMP., HUMIDITY
-40~+85, 10~90% RH
AC INPUT CURRENT (Typ. )
Maximum input current 3.5A at 115VAC, 60Hz or 1.6A at 230VAC, 60Hz with 100% output load.
INRUSH CURRENT (Typ. )
Inrush current is less than 25A at 115VAC or less than 40A at 230VAC under cold start
Conditions. Limiting provided by internal thermistors.
SETUP, RISE TIME
1000ms, 20ms / 230VAC at full load
3000ms, 20ms / 115VAC at full load
HOLD-UP TIME (Typ. )
16ms / 230VAC at full load
16ms / 115VAC at full load
LEAKAGE CURRENT
Leakage current is less than 0.75 mA at 264VAC for earth leakage current
Leakage current is less than 0.25 mA at 264VAC for patient leakage current
DC OUTPUT ADJ. RANGE
DC output voltage (or CH1 of multiple output models) can be adjusted between -5%~+10% rated output voltage by potential meter.
OVERLOAD PROTECTION
Fully protected against short circuit and output overload.
The hiccup type protection will be activated at 120~160% rated load and recovers automatically after fault condition is removed.
OVER VOLTAGE PROTECTION
Provided on output channel 1 only at 115%~135% rated output voltage.
Output will be shut down when this protection is activated.
TEMP. COEFFICIENT
0.04%/ on all outputs at full load between 0~50 of ambient temperature.
VIBRATION
2G of acceleration, vibrating frequency adjust from 10Hz ~500Hz within a
10-minute cycle. 6 testing cycles (60 minutes) each along X, Y, Z axes.
SAFETY STANDARDS
UL60950-1, TUV EN60950-1
WITHSTAND VOLTAGE
4000VAC between input and output
1500VAC between input and F. G.
1500VAC between output and F. G.
ISOLATION RESISTANCE
>100M Ohms for I/P-O/P, I/P-FG, O/P-FG by using 500VDC test voltage.
EMI COMPLIANCE
EMI Specifications Compliance Level
Conducted & Radiation EN55011, Class B EN55022, Class B
Harmonic distortion Voltage flicker EN61000-3-2 EN61000-3-3
EMS COMPLIANCE
EMS Specification Compliance Level
ESD air EN61000-4-2, Level 3, 8KV
ESD contact EN61000-4-2, Level 2, 4KV
RF field susceptibility EN61000-4-3, Level 2, 3V/m Level 3, 10V/m
EFT(Electrical Fast Transient)/Burst EN61000-4-4, Level 2, 1KV/5KHz, Level 3, 2KV/5KHz
Lightning/Surge EN61000-4-5, Level 4, 2KV/Line-Line, 4KV/Line-Earth
Conducted RF susceptibility EN61000-4-6, Level 2, 3Vrms/m, Level 3, 10Vrms/m
Magnetic field immunity EN61000-4-8, Level 2, 3A/m, Level 3, 10A/m
Voltage dip, interruption EN61000-4-11, Compliance
Digital phone carrier immunity ENV50204, Level 2, 3V/m,
MTBF
262, 100 hours min. At full load and 25
Calculated per MIL-HDBK-217F.
DIMENSION (L*W*H)
240x78x46mm
PACKING
0.66Kg; 24pcs/16.8Kg/0.99CUFT
Established in 2003, Powerwat Technology Co., Ltd. develops, produces and sells AC/DC adapters and switching power supplies, chargers, DC to AC converters and laptop adapters, Our products are widely applied to external hard disks, LCD TVs/monitors, laptops and electronic equipments. We serve customers from Europe, North America, Asia and other regions. We output 900, 000 pieces from our ISO 9001: 2000-certified factory every month.
Our R&D team is composed of 25 talented engineers, who each has over six years'' related experience. Thanks to their efforts, we release five new products every month, following the trend towards compact sizes and low power consumption. Most of our products comply with the US CEC and Europe ERP standard. We also strictly comply with German quality regulations. We can develop new products based on your requirements.
It is our stringent QC that makes us a reliable supplier. We have over 30 QC specialists. Unlike our competitors, all of our products are tested in temperature of at least 40 degrees Celsius for up to two hours. We use a fully automated RoHS testing machine imported from Japan to test all incoming raw materials.
To ensure all our products are certified to CE, UL, FCC, PSE, KC, SAA, CB and GS standards, we conduct spot checks in a specialized lab as part of our FQC, and choose samples for EMC testing. In OQC, we test 100 percent of our products again with regular testing machines such as Chroma test machines, compression resistance-testing machines and oscillographs. Our highly stringent QC ensures our products are defect-free. That''s the main reason why we have never received any complaints for the products exported to worldwide. As a result - almost all of our buyers repeat their orders.
As we are familiar with the laws and relations of many countries, we are able to offer you the right product to meet your market requirements.
Our principle is:
Professional, concertration, to meet your special requirements
Good communication, positive attitude, to supply
Best aftersale services
