2015 Hot Selling Car Repair Tools Auto Washing Machine
Product Description
Model No. | SYK-2000-II |
| Input Power | AC 220V |
| Rated Power | 4.0KW |
| Input Air Pressure | 0.6MPa |
| Steam Pressure | 0.4MPa |
| Dimensions | 1170*520*545mm |
| Weight(kg) | 85kg |
| Packing | Carton |
| Standard | CE |
Product Advantages
It is visible for the whole restoring process, the comparison can be seen before cleaning and after cleaning.
No need to remove three-way catalyst and no harm to car.
The first manufacturer produces machine to clean three-way catalyst and reduce vehicle exhaust, has no competition in market.
Compared with the old way of changing three-way catalyst, the cost decreased by 5 times.
It only takes 8 minutes for the whole restoring process, and effect is remarkable.
If one of the following situations happened to the car, recommend you to use our Catalytic Cleaning Machine.
The function of Three-way Catalytic converter was reduced,excessive off-gas.
Gasoline contains more sulfur and phosphorus,and which usded by car.They can be developed into chemical complex on the
surfaces of oxygen sensor and three-way catalytic converter.Gas was not burning enough when running and the inadequate
combustion products will be adhered on the surface of three-way catalytic converter.It would be polluted by accumulated carbon
and particulate matter after curing on nozzle,throttle,inlet.
Effect
1. Special cleaning fluid which cleans the carbon deposit is environmental friendly and will react with precious metals to produce harmless gas which can be discharged.
2. Effect is visible.
3. Three-way catalyst conversion rate has been improved more than 50%.
4. Restore power.
5. Save fuel from 8% to 10%.
6. Reduce vehicle exhaust emission and save back pressure.
Working Theory
Visible Three-way Catalytic Cleaning Machine is used in concert with our special cleaning fluid, it renews the threeway catalyst through two steps, first normal temperature sweeping cleaning, and then high temperature steam cleaning. After the two steps, the efficiency of threeway can be restored to the original factory state, so as to reduce the vehicle exhaust.
Compared with the old way of changing three-way catalyst, the cost decreased by 5 times.
It only takes 8 minutes for the whole restoring process, and effect is remarkable
Why need to clean & repair the catalytic converter?
1)Catalytic converters use a combination of heat and specialty metals to convert carbon monoxide and
hydrocarbons into water vapor and carbon dioxide, which are commonly found in our atmosphere.
2)The catatlytic converter - help quiet and cool the engine.It is an important part of your vehicle and the enironment.
If the vehicel got an exhaust problem, there's smoke blowing from the exhaust pipe, loud noises, rusty tailpipe or strong fumes inside the car.
3)A new free flowing exhaust system improves engine air flow which helps boost fuel economy,can improve fuel consumption by as much as 50%.
4)The job of the exhaust is to direct emission gases away from the car, reduce engine noise, pollution and improve drive performance.
When using Three-way Catalytic Reduction Machine?
If the car was happened in one of below situations,advise you to use this machine.
1)When the vehicle was 12 month or 20,000 km.
2) The effect of Three way Catalytic converter was lowered,and automobile exhaust is out of limits.
3) Gasoline contains lots of sulfur and phosphorus. It form chemical complex on the surfaces
of oxygen sensor and three-way catalytic converter. If the gas does not burn enough,
the inadequate combustion products will adhered on the surface of three-way catalytic
Converter.
The accumulated carbon and particulate matter will pollute the three-way catalytic
converter when curing nozzle, throttle,inlet.
Hunan Shiyuan Environmental Technology Co., Ltd, which is a professional manufacturer of researching&producing Catalytic Converter Cleaning Machine and Auto Carbon Cleaning Machine. Just Within a few years, Shiyuan's customers spread the whole domestic market, such as High-end 4S Car Shop, Automobile Trade Company and the Large Chain Auto Repair/Maintenance Service Center etc...With good reputation for its features of energy-saving, low consumption, economic and environmental protection,
Always persisted in customer oriented, and targeted with high quality service.
Oxyhydrogen Carbon Cleaning Machine and Catalytic Cleaning Machine are stable, reliable, convenient, and practical. Three-way Catalytic Cleaning Machine characterized with full visualization, free demolition cleaning, domestic initiative, economy and timeliness; Our Car Engine Carbon Remover has efficiency in cleaning carbon. Especially famous in curing PM2.5.
Shiyuan has a professional energy research team, advanced products are researched through employing the advisers who are the researchers from National Energy Research and famous university. We firstly introduce foreign advance hydrogen-producing technology to China. Through constant innovation and practice, Shiyuan achieve some Industry- leading technologies and research fruit, and a number of invention patents and utility model patents. Products are produced according to the European Seiko Standard, and perform in strict with the ISO9001 quality control system. All products are CE Certification qualified.
We will do our best for our Greener, Cleaner, Healther earth!
