Categories
Price: | Negotiable/Set |
---|---|
Trade Terms: | others |
Min Order: | 1set |
Pay Type: | L/C,T/T |
2880mm 10 ton/day toilet tissue paper making machine using wheat stalk, reed stalk, bamboo, sugar cane bagasse, cotton lint, wood chips as raw material | ||||
A. Paper machine part: | ||||
I. Main parameter: | ||||
Raw material: wheat stalk | ||||
Output paper: High & medium grade of tissue paper | ||||
Paper grammes: 14-32 gsm. | ||||
Finished paper width: 2800mm | ||||
Wire width: 3200mm | ||||
Capacity: 10 T/D | ||||
Working speed: 120-180m/min | ||||
Designed speed: 200m/min | ||||
II. Paper machine part: | ||||
(I). Introduction of paper machine part: | ||||
The main construction is: reverse roller part, cylinder mould part, dryer can part, reeling part. | ||||
General requirement during the production of paper machine: | ||||
1. All kinds of guide roller is assembled with cast iron choke plug. | ||||
2. The shaft head of all kinds of guide roll is using 45 # steel. | ||||
3. All guide roller body adopts the seamless steel pipe, to ensure the wall thickness requirements. | ||||
(I). Wire part: include reverse part and cylinder mould part. | ||||
1 . 1 Wire part | ||||
1.1.1 Couch roller: Φ500mm×3000mm | ||||
Qty: 1set | ||||
Explain: the body of couch roller is seamless steel pipe, wall thickness is 16mm, rubber thickness is 25mm, rubber hardness is:38°±2, it equips with 1 set of pneumatic lifting and pressure device. Shaft head is 45# steel, it is treated with thermal refining | ||||
1.1.2 lifting and pressure device of couch roller | ||||
Qty: 1 set | ||||
1.1.3 cylinder mould | ||||
size : Φ1800mm×3000mm , wire slice is stainless steel | ||||
Qty: 1 set | ||||
Explain: This cylinder mould is stainless steel wire slice, the thickness of wire slice is 1.5mm. | ||||
1.1.4 High pressure movable spray water device | ||||
Qty: 2 sets | ||||
Explain: It equips with movable high pressure needle type water pipe to clean the mesh, the material is stainless steel, pressure is 2-3 Mpa. | ||||
1.1.5 Vacuum suction box | ||||
Qty: 3 sets | ||||
Explain: box body is welded with stainless steel, panel material is made of ceramic, open mouth is: 20mm | ||||
1.1.6 Guide felt roller: | ||||
Size : φ219×3300mm | ||||
Explain: All the guide roller is equipped with seamless steel pipe, wall thickness is 14mm, it is covered with rubber, rubber thickness is 25mm . | ||||
1.1.7 Stand device of cylinder mould and couch roller | ||||
Qty : 1set | ||||
1.1.8 Square cone pipe device | ||||
Material is stainless steel 304, small end equips with reflux mouth. Quantity of reflux is 10% of the inlet pulp. Square cone pipe and box body is connected with hinge. Activity bolt is fixed. The bottom of square cone pipe is in folded shape structure. | ||||
1.1.9 Arc plate and adjusting device | ||||
2. Touch roller pressure device: it is equipped with 1 set of touch roller pressure device. | ||||
Size: φ650mm×3200mm | ||||
Qty: 1 set | ||||
Explain: the roller body is made of cast iron, the material of cast iron is HT250. It is covered with rubber, rubber thickness is 22mm, rubber hardness is "A"95°±2; | ||||
3 . Dryer part: | ||||
It consist of 1 pc of Φ3000mm dryer can , it equipped with pneumatic scraper, breath type exhaust hood. | ||||
3.1 Dryer can | ||||
size : φ3000mm×3200mm | ||||
qty : 1set | ||||
Material of dryer : HT250 | ||||
hardness : HB200-220 | ||||
Roughness of dryer : ≤0.8micron | ||||
Working pressure : 0.3Mpa | ||||
3.2 The stand of dryer can part : | ||||
Stand column, beam and stand are square frame | ||||
3.3 Steam condensate joint and siphon | ||||
Qty: 1pc | ||||
3.4 Pneumatic scraper of dryer : | ||||
Qty: 2 sets | ||||
Explain: using clip to fix | ||||
3.5 Guide felt roller | ||||
size : φ219×3300mm | ||||
Explain: all guide roller is made of seamless steel pipe, wall thickness is 14mm, it is chromed. The thickness of chroming is 0.05mm . | ||||
3.6 corrector | ||||
Qty: 1set | ||||
3.7 tightener device | ||||
Qty: 1set | ||||
3.8 walking table, staircase, rail, | ||||
qty : 1set | ||||
Explain: it is made of shape steel. | ||||
4 . Exhaust hood | ||||
5 . Reeling machine | ||||
Type: pneumatic reeling machine | ||||
Stand: it is welded with Q235steel board. | ||||
5.1 reeling cylinder | ||||
Qty: 1set | ||||
size: Φ900mm×3000mm | ||||
5.2 reel roller | ||||
Qty: 2sets | ||||
size: 159mm×3000mm | ||||
5.3 scraper | ||||
The scraper of reel cylinder:1set | ||||
Material of scraper: welded with steel board. | ||||
Material of blade: EP | ||||
5.4 Multisection activity curved roll | ||||
Qty : 1set | ||||
Roller material : 20# steel | ||||
5.5 frame and ladder | ||||
material: welded with shaped steel | ||||
6. Transmission part: | ||||
6.1 The power is as following: | ||||
Main machine: 75 KW | ||||
Reeler: 15 KW | ||||
6.2 the type of reducer and speed retio subject to design. | ||||
6.3 drive motor, three-phase asynchronous motor | ||||
6.4 the transmission part assorts with coupling, motor, the foundation of reducer, foundation bolt, connecting bolt. | ||||
6.5 transmission frequency conversion device: equip with frequency converter and controller. | ||||
7. Supply scope: | ||||
(II). Machine list of paper making line: | ||||
No. | Equipment | Qty (SET) | ||
1 | 2880mm single-cylinder single-wire and single-felt toilet paper machine. | 1 | ||
2 | Exhaust hood of drier can (Duplex) | 1 | ||
3 | φ800 Screw type ventilator | 2 | ||
4 | cylinder vat | 1 | ||
5 | cylinder mould | 1 | ||
6 | 15 Type roots pump | 2 | ||
7 | air compressor | 1 | ||
8 | air storage tank | 1 | ||
9 | steam storage tank | 1 | ||
10 | Frequency control cabinet | 1 | ||
11 | multi stage pump | 1 | ||
B. Pulp making line: | ||||
No. | Name | Specification | ||
1 | Conveyor | 1. power: 5.5kw 2. qty: 1 set 3.function: convey cotton lint to prepreg machine | ||
2 | spiral prepreg machine | 1. power: 7.5kw 2. qty: 1 set 3.function: mix with chemical, prepreg cotton lint | ||
3 | Spherical digester | 1. power: 5.5kw 2. qty: 2 sets 3.function: add steam to boil cotton lint under high pressure | ||
4 | mixer | 1. power: 3kw 2. qty: 1 set 3.function: mix pulp in the pulp chest | ||
5 | pulp pump | 1. power: 7.5kw 2. qty: 1 set 3.function: pump pulp to spiral press machine | ||
6 | spiral press machine | 1. power: 55kw 2. qty: 1 set 3.function: squeeze out black water from the pulp | ||
7 | thruster | 1. power: 7.5kw 2. qty: 1 set 3.function: mix pulp in the pulp chest | ||
8 | pulp pump | 1. power: 7.5kw 2. qty: 1 set 3.function: pump pulp to bleaching machine | ||
9 | Bleaching machine | 1. power: 7.5kw 2. qty: 1 set 3.function: wash and bleach pulp | ||
10 | Hydrascreen | 1. qty: 1 set 2.function: filter pulp | ||
11 | Potcher | 1. power: 4kw 2. qty: 8sets 3.function: wash and bleach pulp | ||
12 | thruster | 1. power: 7.5kw 2. qty: 4 sets 3.function: mix pulp in the pulp chest | ||
13 | pulp pump | 1. power: 7.5kw 2. qty: 1 set 3.function: pump pulp to refiner | ||
14 | 380 double discs refiner | 1. power: 37kw 2. qty: 2sets 3.function: miscellaneous, purification, separation relief | ||
15 | Hydrascreen | 1.qty: 1set 2.function: it is used to filter pulp | ||
16 | thruster | 1. power: 7.5kw 2. qty: 4 sets 3.function: mix pulp in the pulp chest | ||
17 | pulp pump | 1. power: 7.5kw 2. qty: 1 set 3.function: pump pulp, adjust the consistency to 3.0% | ||
18 | pulp pump | 1. power: 30kw 2. qty: 1 set 3.function: pump pulp, adjust the consistency to 0.8 % | ||
19 | Low consistency desander | 1.qty: 1set 2.function: remove the sand from the pulp | ||
20 | Pressure screen | 1. power: 15kw 2. qty: 1 set 3.function: pure pulp | ||
C. Further processing making line | ||||
(I). Small tissue roll processing making line: | ||||
Total 3 machines are needed for making small tissue roll | ||||
1. 2880mm rewinding and perforating machine | ||||
1.1 | Function This machine can rewind the jumbo toilet roll into small roll with various smaller diameters in accordance with need .it don't change the width of jumbo roll,then ,the smaller diameter toilet roll can be cut into different width small toilet roll. | |||
2. YG-450 band-saw paper cutting machine | ||||
2.1 | Function: Band-saw Paper cutting machine can cut tissue roll(which is rewinded into desired diameter) into different length. Which is an important paper process machine | |||
3. Sealing machine | ||||
3.1 | Function: For high labor intensity and low working efficiency and many deficiencies in general workers at present sealing operations, this machine is equipped with built-in magnetic absorbing system; sealing and cooling time can be regulated automatically, which can reduce labor intensity greatly and overcome a series of problems in artificial use, greatly improve work efficiency and quality of seal. | |||
(II). Napkin paper processing making line: | ||||
Total 2 machines are needed for making napkin paper | Finished paper photo | |||
1.jumbo roll slitting machine (can share the same machine with facial tissue) | ||||
1 | Function: Mainly used for cutting monolayer and rewinding base paper into monolayer, double layers and three layers' cigarette paper, applied to folded tissue, napkin, cased facial tissue. This machine sucks edge with vacuum, fixed top knife angle, steady operation, tidy cut. So it is popular with paper-making manufacture. | |||
2. Napkin paper folding machine | ||||
1 | Function: This machine can produce square table tissue, wallet paper, model N & M table tissue (width is adjustable). Step 1:longitudinal fold; step 2: horizontal fold. The designs of embossed (word design & trade mark) can be made according to customers needs. This machine can automatic count and constant temperature, adjust the speed. This machine has compact construction, exact count, beautiful shape, steady operation, extensive function. |
Prod Model: | 2880MM |
---|---|
Markets: | South America,Southeast Asia,Africa,Mid East,Eastern Asia |
Certificate: | ISO, SGS |
Process: | Pulping Machine |
Usage: | Household Paper Machine |
Type: | Drum Type |
Automatic Grade: | Automatic |
Computerized: | Yes |
Certification: | ISO |
Finished Paper Type: | Toilet Paper Jumboo Roll and Small Roll |
Machine Capaicty Range: | 0.8- 15 Ton/Day (24 Hours Working) |
Raw Material: | Waste Paper and Virgin Pulp |
Real Running Speed: | 350-400PCS/min |
Condition: | New |