Product Specifications
| Prod Model: |
ALSD-18023 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Thickness: |
0.3mm |
| Width: |
300mm |
| Length: |
10m |
| Thermal Conductivity (W/M-K): |
1 |
| Hardness(Shorea): |
50~70 |
| Application: |
Insulators |
| Type: |
Insulation Film |
| Chemistry: |
Hybrid Insulation |
| Thermal Rating: |
200 200 |
| Maximum Voltage: |
<10KV |
| Material: |
Silicone ,Fiberglass |
| Color: |
as Customer Request |
| Brand: |
Alsd |
Product Description
Description:
Thermal insulation silicone cloth is use fiberglass as basis,reinforcement of silicone elastomeric material and high molecular polymer coated both sides of it, also known as thermal silicone cloth, have strong tear resistance. the silica gel cloth can effectively reduce the thermal resistance between the electronic component and the radiator. It has good characteristic of electrical insulation, high dielectric strength, good thermal conductivity, high resistance chemical properties, in addition, It can withstand problem of short circuit of high voltage and metal piercing , and is an excellent thermal conductive insulation material to instead of the traditional mica and silicone grease.
Advantages
1.Dielectric strength high,
2.Good thermal conductivity,
3.Good toughness, tear resistance,
4.Surface soft, no viscosity on surface ,
5.High voltage insulation performance,
6.Strong withstand voltage, wear resistance,
7.Thin thickness, suitable for insulation and thermal power device.
Application:
1. Military, aviation ;
2. Large power source ;
3. Heating power device;
4. Automobile electronic heating module ;
5. Motor control, communication equipment;
6. Power semiconductor,is MOS tube IGBT chip
7. High voltage, high temperature, high power welding machine etc.
Specifications:
Sheet, die-cutting, roll, with adhesive and without adhesive.
Basic size:
0.23mm*300mm*50m
0.3mm*300mm*50m
0.45mm*300mm*50m
other different thickness can be customized
According to customer requirements can be cut into sheets of different shapes by mould, we also can undertake gum processing to meet the customer demand.
Physical property parameter list:
CHARACTER |
UNIT |
TEST METHOD |
SB |
Colour |
-- |
-- |
|
Specific Gravity |
g/cm3 |
ASTM D297 |
1.8~2.0 |
Hardness |
Shore A |
ASTM D2240 |
50~70 |
Thickness |
mm |
ASTM D751 |
0.23~0.8 |
Tensile Strength |
Kgf/cm2 |
ASTM D412 |
>180 |
Voltage Endurance |
KV/mm |
ASTM D149 |
>6.5 |
Continuous use Temp |
ºC |
EN 344 |
-40ºC~+220ºC |
Flame Rating |
-- |
UL-94 |
V-0~V-2 |
Thermal Condudctivity |
W/m.k |
ASTM D5470 |
1.0W |
Thermal Resistance |
ºC-in2/W |
ASTM D5470 |
0.2 |
Shenzhen Ailiston Tec. Co., Ltd., is the manufacturer for thermal conductive pad.
It's gap filled with high-performance thermal conductivity material. Mainly used in electronic device and heat sinks or product transfer interface between the enclosure. It has a good adhesive flexible, good compression performance and excellent thermal conductivity. So that it can be fully in use of electronic originals and the air discharge between the heat sink in order to achieve access to the full. Heat effect increased significantly. It also has a certain degree of self-adhesive, compared to ordinary thermal insulation material in the product installation process has brought great convenience, easy off, easy to operate.
It's widely use for the communications equipment, computer, swithing power suppply, DVD and etc.
The basic specification is: 200mm*400mm thickness is 0.5mm-15mm. (for each dimension need to add 0.5mm, such as 0.5; 1; 1.5; 2^. Up to 15mm).
Regarding the demension and col. We could cut it as the customers' requiest. If you have any questions pls don't hesitate to contact to us.
