Product Specifications
Prod Model: |
35L |
Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Warranty: |
1 Year |
Voltage: |
380V |
Weight: |
<50 tons |
Type: |
General Rubber Machinery |
Type Of General Rubber Machinery: |
Material Processing Machine |
Type Of Tire Machinery: |
Rubber Regeneration Machinery |
Power: |
10~100KW |
Using Life: |
≥15 Years |
Name: |
Rubber Plastic Dispersion Mixer Machine |
Rotor: |
2-Wing |
Product Description
35L Rubber Plastic Dispersion Mixer Machine
Function:
Mainly used for plasticating and mixing of natural rubber, synthetic rubber, reclaimed rubber and plastics, and used in the mixing of various low glue degree materials.
Features:
1. Mixing Chamber
It consists of M-shaped mixing slot and two side plates. The slot is made of high quality abrasion-resistant steel. The jacketed structure is for cooling or heating. The internal surface is coated with hard chrome.
2. Temperature Measuring Equipment
The central base of the mixing chamber is designed with wear-resisiting, sensitivity plug-in thermal resistance sensor, which is connected with electric control system to monitor and control the mixing temperature.
3. Rotor
It is made of train shaft materials with high precision treatment. The driving force is good. It has long and short rib rotors. There is a hole connecting through with the inner cavity of the rib for better cooling effect. The rid peak and end face build-up weld is made of abrasive hard metal alloy. It is polished after grinding and hard chrome plating.
4. Heating and Cooling System
Adopt a common piping system to allow cooling water or heating steam into the rotor through the ribs in three columns, mixing chamber, and the ram cavity, the material for circulating cooling or heating.
5. Unload Turnovre Mechanism
By the beake motor, cycloid speed reducer and copper turbine structure mechanical turnover, promote the mixing chamber unload turn 140 degrees.
6. Dust-proofing and Sealing Device
The upper port of mixing chamber and the interface of frame bracket is an arched plate labyrinth-type structure. The rotor shaft end face is made of alloy steel sleeve. The contact-type unlubricated spring tensioning structure has a reliable sealing effect and abrasive feature.
7. Main Driving System
It consists of main motor, speed reducer and friction gear so that the two rotors are differentially rotated in opposite direction.
8. Pneumatic Control System
The bi-directional cylinder drives the movement of pressing ram. When the mixing chamber is overload, the current will send instruction. The pressing ram will lift automatically to protect the motor. The pressing ram can be lifted forcibly by manual when necessary.
9. Electric Control System
Imported PLC devices, electric control components are all imported products or the introduction of technology to improve the system reliability.
Advantages:
1. Reasonable design, tightly construction, occupying small area, installing convenience.
2. High efficiency of production,
3. Easy to operate.
4. Easy for cleaning the mixing chamber and replacing color material. The mixing chamber adopts close construction. Cooling & heating system is good.
Our Services:
1. One year warranty after commissioning.
2. Engineers available to service machinery overseas.
3. If there is problem, we will give feedback within 24hours.
Any question about our products, please feel free to contact with us.
We are always pleased to serve you at any time.
Model No. |
X(S)N-35×30 |
X(S)N-55×30 |
X(S)N-75×30 |
X(S)N-110×30 |
Total volume of mixing chamber(L) |
75 |
125 |
170 |
250 |
Working volume of mixing chamber(L) |
35 |
55 |
75 |
110 |
Driving motor power(kW) |
55 |
75 |
110 |
185 |
Tilting motor power(kW) |
2.2 |
2.2 |
4 |
5.5 |
Tilting angle(°) |
140 |
140 |
140 |
140 |
Rotational speed of the rotor (front /rear)(r/min) |
30/24.5 |
30/24.5 |
30/24.5 |
30/24.5 |
Pressure of compressed air(MPa) |
0.5~0.8 |
0.6~0.8 |
0.6~0.8 |
0.6~0.8 |
Capacity of compressed air(m3/min) |
≥0.9 |
≥1.0 |
≥ 1.0 |
≥1.5 |
Pressure of cooling water (rubber mixing )(MPa) |
0.3~0.4 |
0.3~0.4 |
0.3~0.4 |
0.3~0.4 |
Pressure of heating steam (plastics mixing )(MPa) |
0.5~0.8 |
0.5~0.8 |
0.5~0.8 |
0.5~0.8 |
Dimensions(L * W *H)(mm) |
3200*1900*2950 |
3230*1927*2958 |
3325*2615*3105 |
4075*2712*3580 |
Gross weight(t) |
~6.3 |
~7.1 |
~9.5 |
~14.9 |