40 Gpm Per Minute Water Softener Equipment

Product Specifications

Prod Model:	YL-I-10
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Control Mode:	Flow Rate Type, Time Type
Resin:	001×7 Strong Acidic Cation-Exchange
Working Ambient Temperature:	5-50centigrade
Relative Humidity:	Less Than 95%(25centigrade)
Hardness Of Raw Water:	Less Than 8mmol/L
Hardness Of Effluent:	Less Than 0.03mmol/L
Inlet Water Pressure:	0.2 to 0.4mpa
Free Chlorine:	Less Than 0.3mg/L
Suspended Solid:	Less Than 0.5mg/L
Iron Content:	Less Than 0.3mg/L
Installation:	Cabinet Type
Working Principle:	Ion Exchange
Certification:	CE
Inlet Mode:	Pipeline
Heating Mode:	Hot Pot

Product Description

Application scope of softener
Mainly used in industry and civil water softening preparation, such as Boiler feed water make-up water, air conditioning system make up water, heat exchanger, power plant, chemical, textile, printing and dyeing, bio-pharmaceutical, Electronic system and water pretreatment.

Control mode of fully automatic water softener
(1) Single tank time type: It adopts microcomputer to control the time, when operation of the equipment reaches setting time, it will automatically enter the regeneration condition, which can be regenerated for once a day or once for some day.
(2) Single tank flow type: It adopts control of turbine flow or electronic flow sensor, when the yield of softener reaches preset flow it will automatically enter the regeneration condition, which can be recycled many times every day.
(3) Double tanks flow type: Which could be divided into one running-one alternating, and simultaneous running and separately regeneration.
(4) One running and the other alternation type: One tank is running while the other is alternating, when water yield of operating tank reaches the preset flow rate, it will enter the regeneration stage, meanwhile, the other tank will enter the working state, these two tanks work and regenerate alternatively to realize continuous water supplying of 24 hours.
(5) Simultaneous running and separately regeneration type: Two cans running simultaneously, when the flow rate reaches the setting rate, one tank (can) will regenerate and the other tank will output water continuously, when the first regeneration tank finish the regeneration it will enter the working stage, the other one will enter regeneration stage, these two cans finish regeneration and enter working state simultaneously.

The Trouble With Hard Water

Hard water (calcium & magnesium) is a common problem for many

homeowners and businesses. When hardness minerals are combined with

heat it forms troublesome scale. Scale causes costly build-up in your

plumbing, water heater and other water using appliances. When combined

with soap, the minerals form soap curd or scum that makes skin dry and

itchy, hair lifeless, laundry dull and builds up on fixtures.

Benefit From Softer Water:

        Silky shiny hair

        Soft supple skin

        Crystal clear dishes & glassware

        Bright whites, vibrant colours

        Easier cleaning

        Use up to 75% less soap

       Lower water heating cost by 29%

       Protect plumbing & appliances

      Extend life of laundry

 

Hardness of  raw water	≤8mmol/L	Power supply	220V/50HZ
Hardness of effluent	≤0.03mmol/L	Control mode	flow rate type, time type
Inlet water pressure	0.2~0.4Mpa	Resin	001×7 strong acidic cation-exchange
Free chlorine	≤0.3mg/L	Working ambient temperature	5-5degree
Suspended solid	<0.5mg/L	System water temperature	5-4degree
Iron content	<0.3mg/L	Relative humidity	≤95%(25degree)

Specifications:

Type	Model	Water Output (m³/hour)	Resin-tank (diameter*Height)	Brine-tank(Liter)	Resin (kg)
Single Valve Single Tank	YL-I-0.5	0.5	200×900×1PC	60×1PC	20
	YL-I-1	1	250×1400×1PC	60×1PC	40
	YL-I-2	2	300×1400×1PC	100×1PC	60
	YL-I-3	3	350×1400×1PC	130×1PC	80
	YL-I-4	4	400×1650×1PC	200×1PC	120
	YL-I-5	5	500×1750×1PC	300×1PC	180
	YL-I-6	6	600×1900×1PC	350×1PC	240
	YL-I-10	10	750×1900×1PC	500×1PC	360
	YL-I-18	18	900×1900×1PC	800×1PC	520
	YL-I-25	25	1000×2200×1PC	1000×1PC	720
	YL-I-35	35	1200×2400×1PC	1500×1PC	1000
	YL-I-50	50	1500×2500×1PC	2000×1PC	1600
Dual Valve Dual Tank (Simultaneous working, alternate regeneration)	YL-II-36	36	900×1900×2PCS	800×2PCS	1040
	YL-II-50	50	1000×2200×2PCS	1000×2PCS	1440
	YL-II-70	70	1200×2400×2PCS	1500×2PCS	2000
	YL-II-100	100	1500×2500×1PCS	2000×2PCS	3200
Dual Valve Dual Tank (One work, one standby)	YL-II -1	1	250×1400×2PCS	60×2PCS	80
	YL-II-2	2	300×1400×2PCS	100×2PCS	120
	YL-II-3	3	350×1400×2PCS	130×2PCS	160
	YL-II-4	4	400×1650×2PCS	200×2PCS	240
	YL-II-5	5	500×1750×2PCS	300×2PCS	360
	YL-II-6	6	600×1900×2PCS	350×2PCS	480
	YL-II-10	10	750×1900×2PCS	500×2PCS	720
	YL-II-18	18	900×1900×2PCS	800×2PCS	1040
	YL-II-25	25	1000×2200×2PCS	1000×2PCS	1440
	YL-II-35	35	1200×2400×2PCS	1500×2PCS	2000
	YL-II-50	50	1500×2500×2PCS	2000×2PCS	3200

Our services:

We provide 24 hours online customer service.

Any inquiry about water treatment system, please feel free to contact me for further details!

Contact information:
Mobile phone: +86 13585066069
Website: http://yldwater.en.made-in-china.com
Official website: www.zgyld.com
Guarantee period:1 year
After-sale service:800-827-87-226