Alkali resistant fiberglass mesh
Brief introduction:
The bottom meshes are c-glass or e-glass fiberglass leno textile, then coated with styrene-acrylic emulsion.They are widely used in building industry.
Features:
1.Good chemical stability: alkali resistant, acid resistant, waterproof,cement erosion resistant.
2.mildew and rot resistant.
3.Heat proof,cold proof,fire resistant,thermal insulation.
4.Good dimensional stability:with stable resin bonding and high tear strength,smooth,shrink and deformation resistant.
Application:
They are widely used in wall reinforcing, Exterior Insulation Finishing Systems (EIFS), and roof waterproofing,also to reinforce cement,concrete, plastic, bitumen, plaster, marble, mosaic,rubber,fire board,road surface,etc.
Specifications:
Width: From 20cm to 2.2m.
Roll length: 50m, 100m, 300m, or so.
Cell size: 2mm*2mm to 10mm×10mm.
weight: From 40g/sqm to 300g/sqm
Colour: white, blue, orange,yellow,green,black, as required.
Packing: cardboard tube,each roll in a shrink wrapping poly bag, in standard export cartons,as required.
General referential technical data:
No. | Specifications | Cell size(mm) | Yarn counts (tex) | Base mesh weight | Resin | Mesh weight | Tensile strength n/m | Weaving |
| | warp | weft | warp | weft | (g/m2) | content(%) | (g/m2) | warp | weft | |
1 | 3.3*3.3-40 | 3.3 | 3.3 | 33*2 | 50 | 35±2 | 14±2 | 40±3 | 400 | 400 | leno |
2 | 3.3*3.3-45 | 3.3 | 3.3 | 33*2 | 67 | 39±2 | 14±2 | 45±3 | 500 | 500 | leno |
3 | 3*3-45 | 3 | 3 | 33*2 | 50 | 39±2 | 14±2 | 45±3 | 500 | 450 | leno |
4 | 3*3-50 | 3 | 3 | 33*2 | 67 | 43±2 | 14±2 | 50±3 | 500 | 500 | leno |
5 | 2.5*2.5-55 | 2.5 | 2.5 | 33*2 | 50 | 46±2 | 14±2 | 55±3 | 800 | 700 | leno |
6 | 2.5*2.5-60 | 2.5 | 2.5 | 33*2 | 67 | 52±2 | 14±2 | 60±3 | 700 | 750 | leno |
7 | 4*4-60 | 4 | 4 | 33*2 | 160 | 50.4±3 | 16±2 | 60±3 | 700 | 700 | leno |
8 | 2*2-75 | 2 | 2 | 33*2 | 67 | 63±2 | 14±2 | 75±3 | 800 | 800 | leno |
9 | 4*4-75 | 4 | 4 | 33*2 | 220 | 63.0±3 | 16±2 | 75±3 | 800 | 800 | leno |
10 | 4*4-85 | 4 | 4 | 33*2 | 260 | 71.4±3 | 16±2 | 85±3 | 900 | 900 | leno |
11 | 10*10-90 | 10 | 10 | 200*2 | 365 | 75.6±3 | 16±2 | 90±3 | 900 | 900 | leno |
12 | 4*4-90 | 4 | 4 | 66*2 | 202 | 75.6±3 | 16±2 | 90±3 | 1100 | 1100 | leno |
13 | 5*5-110 | 5 | 5 | 99*2 | 278 | 92.4±3 | 16±2 | 110±3 | 1250 | 1200 | leno |
14 | 10*10-110 | 10 | 10 | 200*2 | 550 | 92.4±3 | 16±2 | 110±3 | 1100 | 1100 | leno |
15 | 4*5-110 | 4 | 5 | 66*2 | 308 | 92.4±3 | 16±2 | 110±3 | 1200 | 1200 | leno |
16 | 4*5-125 | 4 | 5 | 99*2 | 293 | 105.0±3 | 16±2 | 125±3 | 1250 | 1250 | leno |
17 | 5*5-125 | 5 | 5 | 99*2 | 343 | 105.0±3 | 16±2 | 125±3 | 1250 | 1250 | leno |
18 | 10*10-130 | 10 | 10 | 250*2 | 600 | 109.2±3 | 16±2 | 130±3 | 1250 | 1250 | leno |
19 | 5*5-145 | 5 | 5 | 132*2 | 364 | 121.8±3 | 16±2 | 145±3 | 1300 | 1400 | leno |
20 | 4*5-145 | 4 | 5 | 132*2 | 295 | 121.8±3 | 16±2 | 145±3 | 1450 | 1450 | leno |
21 | 4*4-145 | 4 | 4 | 99*2 | 340 | 121.8±3 | 16±2 | 145±3 | 1450 | 1450 | leno |
22 | 4*4-150 | 4 | 4 | 130*2 | 295 | 129.0±2 | 14±2 | 150±3 | 1500 | 1500 | leno |
23 | 4*5-160 | 4 | 5 | 132*2 | 357 | 134.4±3 | 16±2 | 160±3 | 1500 | 1500 | leno |
24 | 4*4-165 | 4 | 4 | 132*2 | 338 | 138.6±3 | 16±2 | 165±3 | 1500 | 1500 | leno |
Yaoxing Fiberglass is a professional fiberglass mesh and tape manufacturer,and has specialized in the production more than 16 years.By standard quality,appropriate prices and best service,we always gain worldwide clients' approval and trust.
Sincerely welcome to visit Yaoxing!
Warmly welcome to order as your choice!
Contact:March Wang
SUQIAN YAOXING FIBERGLASS CO., LTD.
Address:8 ,Fu Chun Jiang Road, Economic Development Zone,Suqian,Jiangsu,China
Tel:+86-527-84451186
Fax:+86-527-84451185
MP:+86-15996785951
Zip:223800
http://www.yx-fiberglass.com
Suqian Yaoxing Fiberglass Co., Ltd. is a professional manufacturer of fiberglass mesh and fiberglass tape.
It was regrouped and set up in 2007 based on the former corporation-Suqian Yaoxing Fiberglass Industry. The corp. Lies in a famous historic and cultural city-Suqian City, in the north of Jiangsu Province. The traffic is convenient, as it is near Lianyungang Port, Shanghai Port, and Xuzhou Airport, with 8 high ways through or close to the city. Jinghang Canal passes through the whole land. It takes about 40 minutes to take plane from Shanghai Pudong Airport to Xuzhou Airport, about 1.5 hours from Guangzhou Baiyun Airport, Shenzhen Airport to Xuzhou Airport.
The whole area is over 20, 000 square meters. The staff number overpasses 200. There are full sets of processing equipments, of more than 6 production lines, including 6 sets of warping and beaming machines, more than 100 rapier looms, 8 sets of coating and finishing equipments, etc.
The factory has specialized in the fiberglass field more than 16 years. We have formed a high-efficiency production and management staff team, significantly, we have set up standard QC system and Products Research & Development Department, to follow the international market trend, to develop new products, to improve the techniques and guarantee the quality.
At present, the production capacity exceeds 50, 000, 000 square meters of fiberglass meshes and tapes per year.
By good quality, appropriate price and efficient service, all the products sell well in the international market, we always gain approval and trust from worldwide clients.
Welcome!