Product Specifications
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Product Description
Intepro has now incorporated cost efficient and highly effective AC Sources into our product line. We have partnered with Preen (AC Power Corporation), a leading AC Source manufacturer, to provide a full line of AC power sources and test & measurement products to our customers. Intepro will provide local sales, marketing, application engineering, and customer service expertise to support this equipment purchased by our customers.
Available Products
AFC Series - Manual AC Source
The AFC Series are fixed AC Power sources ranging from 0.5kVA to 800kVA. This series has a continuous and adjustable output voltage between 5~300V. This allows for quick and convenient 3 scales of preset voltage for high and low voltage simulation. To achieve highly accurate measurements for your parameters, the AFC Series has a voltage of 0.15%FS+4Count, current of 0.2%FS+4Count; Frequency of 0.1%; and Power of 0.3%FS+4Count.
Key Features
0.5kVA~2000kVA
Robust Design - Supports Reactive Loads
Strong Cost/Performance
AFV Series - Programmable AC Source
The AFV Series are programmable AC power sources that have numerous applications from Transformer and Product Life Cycle Tests to consumer applications and electronic motor tests. The AFV series has a programmable output voltage and frequency, with four operational modes: generic, step change, gradual change and curve change simulation.
Key Features
15kVA~2000kVA
Cost Effective
Highly Efficient
PAS-F Series - Programmable Grid Simulator
The PAS-F series is a family of programmable Utility Grid Simulation Testers that are a part of a trio of AC Power Test Instruments from Intepro Systems that enable efficient and effective testing and certification of power inverters used with photovoltaic (PV) systems and renewable energy systems. The PAS-F is a combination of a utility grid simulator and regenerative load that can both sink and source the full specified power of the instrument.
Key Features
45kVA~2000kVA
Standard Regenerative Grid Synchronizing Option
Supports Zero LVRT and BDEW
AMF Series - 400Hz Solid State Frequency Converter
The AMF Series is small and light-weight AC Power Source. These units are typically 1/4th of the size of motor generator sets of the same power output rating. This series is also MIL-STD-704 compliant.The AMF Series is cost effective due to its modular design. It allows for quick and easy fault diagnosis and modules replacement.
Key Features
±10% Adjustable Output Voltage and Frequency
MIL-STD-704 Compliant
High Efficiency, Optimum Stability, and Superior Heat Dissipation
To purchase one of our AC Sources or have any questions please contact our sales team
DC Sources
Intepro has now incorporated cost efficient and highly effective DC Sources into our product line. We will provide a full line of regenerative DC power sources and test & measurement products to our customers. These products offer Intepro's Auto Ranging Advantage. Intepro will provide local sales, marketing, application engineering, and customer service expertise to support this equipment purchased by our customers.
PS 9000 Series - 1U DC Source
The microprocessor controlled laboratory power supplies of series PS 9000 1U offer many functions and features in their standard version, making the use of this equipment remarkably easy and most effective. All this comes in a flat design with only 44 mm of height.
Also available in 2U.
PSI 9000 Series - 3U Programmable DC Source
The PSI 9000 Series of high performance programmable DC power sources are FPGA controlled and come standard with several advanced features. User-friendly, interactive menu navigation makes the use of this equipment remarkably easy to program.
Also available in 2U.
Welcome and thank you for visiting Intepro Systems. Since 1981, Intepro has supplied users and manufacturers all over the world ATE systems to test power electronics used in a wide range of applications. Our knowledge and expertise in moving and measuring power makes our system unparalleled for production testing, ESS screening, repair and characterization of power components and sub assemblies used across all industries.
Key to our systems is an open architecture for hardware and software that permits complete flexibility to configure and integrate third party instrumentation with a wide range of Intepro and customer hardware.
Our systems are based universal buses (VXI, PXI, LXI, CAN, Ethernet, GPIB, Serial) that provides choice to the customer and not limited to a those few instruments built by competition. We integrate all commercially available equipment that meets your test requirements.
And tying it all together is our PowerStar 5 Test Executive software, the leading test executive for power electronics testing for a decade. PowerStar 5 lets users choose from quick test programming using drag and drop, fill-in-the-blank canned routines OR the ultimate flexibility like off the shelf test executives.
With hundreds of customers around the world and thousands of installed systems, Intepro has sales and support offices in China, Ireland, UK and USA and a network of independent representatives and distributors. These offices offer a full set of test services including, Integrated Test Systems, Software, Training, Support, Applications Assistance, and Hardware and Software Maintenance coverage.
Intepro offers unique test system integration to all our customers. We will develope a quality test system to fit your requirements.
Functional test and design verification systems for power supplies, power components and power modules
Life cycle testing and reliability stress screening of AC/DC and DC/DC converters, rechargeable batteries and other power electronics components
This extremely versatile software can be used for functional PSU testing and burn-in test. PowerStar 6 is a very comprehensive software package with ease of use featuring highly. Just some of the features include drag and drop programming, pre-defined test libraries and the facility to generate new tests.
Intepro Systems offers Cost efficient AC Sources Intepro Systems entered a partnership with Preen to help solve our customers AC source needs. We now specialize in AC sources that range from 0.5kVA to 2MVA.
Intepro also specialiazes in AC and DC Electronic Loads. Intepro's EL and ML1800 Series of Electronic DC loads work for a variety of different power tests and are completely compatible within our test systems and test software PowerStar. Our EL Series DC loads are high power ranging from 150W to 6000W while the ML1800 is a modular DC load with modules from 300W to 600W.
Some Key Features include:
Graphic User Interface
Dedicated PSU Test Library
SQL Compatible
Automatic Report Generator
Flexible Test System configuration
Fast Test Times
Multi-Unit Simultaneous Testing
Real Time print out on failed tests
