Categories
| Price: | US $ 1kg |
|---|---|
| Trade Terms: | FOB,EXW |
| Min Order: | 1kg |
| Pay Type: | T/T |
| Prod Model: | GR205 |
|---|---|
| Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Package: | 20L/20kg Per White Plastic Barrel |
| Consumption: | 3.5-4.5kgs/M2 |
| Storage: | Please Store It in Cool, Dry, Clean Places Under 0 |
| Storage Time: | 12 Months |
| Color: | White |
| Appearance: | Liquid |
| Main Raw Material: | Acrylic |
| Method: | Spray |
| Level: | Finish Coat |
| Drying Method: | Air Drying |
| Certification: | ISO9001 |
| Components: | Pigment |
| Formation Mechanism: | Conversion Type |
| Substrate: | Cement, Wood and So on |
| Water |
| pigment |
| filler |
| additives |
| liquid emulsion |
| film former etc |
1. Clean the surface before you paint, using a degreaser. Rinse it two times, then wipe it dry with a towel. Allow the surface to air dry for 15 minutes. While it dries, tape around the surface on any area you do not want to paint, using painter's tape. Use the utility knife to trim the edges straight and press the tape down firmly all the way around to seal it and prevent leaking. | |
2. Patch any cracks or imperfections with painter patch. Scrape just enough of the substance over the areas to push the material into the cracks, then go over it again with a putty knife at a slight angle to remove any excess. Let it dry the amount of time the instructions require, then lightly sand the spot to make it flush with the rest of the surface. Wipe it down with a damp sponge to remove the dust. | |
Instructions | 3. Use the putty knife to pop the lid on the primer, then stir it completely with the paint stick. Pour some into the tray and dip the roller in, rolling it up the textured part of the tray to push the paint into the roller nap. Apply the primer to the entire surface and allow it to dry for eight hours. |
4. Dab the sponge into the granite mineral paint and dot the color onto the primered surface. The pattern is up to you, and you can use multiple colors. Allow four hours of drying time between each color application. A light touch on the sponge will leave less marking; a firm push on the sponge will leave large marks. A light touch is best when using multiple colors. | |
5. Finish the project by rolling on the clear coat. It simulates the look of polished granite and will protect and seal the project. Apply three to four coatings of clear finish, allowing each coat to dry for four hours. Let the project cure for at least 48 hours before placing anything on the surface. |
Gloss Finish | Matte |
Color | Refer to Dongyi Company Color chart |
Consumption | 3.5-4.5kgs/m2 |
Surface Dry Time | 2 hours under 25°C |
| Recoating Painting Time | 24 hours/25°C, 50% RH |
Storage: | Please store it in cool, dry, clean places under 0-35°C. |
Storage Time: | 12 months |
| Materials | Model | Layers |
| Primer | Dongyi Professional Primer | 1 layer |
| Intermediate-coat | Dongyi Professional Granite Paint | 1-2 layer |
| Finishes | Dongyi Professional finishes | 1 layer |
| Construction way: | Spray with professional spraying gun driven by air compressor Please stir evenly, and put some water if necessary before construction. |
| Construction condition: | Up 5°C and lower than 85% RH |
| Construction manual: | Refer to Dongyi Stone paint construction manual |
