Categories
Price: | Negotiable/Ton |
---|---|
Trade Terms: | FOB,EXW,CFR |
Min Order: | 10/Ton |
Pay Type: | L/C,T/T,D/P,Paypal |
Prod Model: | E460 E550 E690 |
---|---|
Markets: | North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
Productivity: | 3000mt/Month |
Materials: | E460 E550 E690 |
Thickness: | 4mm to 150mm |
Width: | 1200mm to 4000mm |
Length: | 3000-18000mm |
Certification: | Mtc, CCS, BV. SGS |
Delivery Time: | According to The Quantity |
Delievey State: | Tmcp, Q&T, N, Ar, Cr, a, Q and N&T |
Type: | Steel Plate |
Technique: | Hot Rolled |
Application: | Ship Plate |
Special Use: | High-strength Steel Plate |
Standard: | ISO4950-3 |
Surface Treatment: | According Client's Requirement |
Chemical composition [%{m/m}] | |||||||
Grade | Quality |
C max |
Mn | Si |
P Max |
S Max |
Othere elements |
E460 |
DD E |
0.20 0.20 |
0.7-1.7 0.7-1.7 |
< 0.55 < 0.55 |
0, 035 0, 030 |
0, 035 0, 030 |
Depending on thicknesses and manufacturing conditions, the manufacturer may find it necessary to add on or serveral alloying element within the limits defined below: |
E550 |
DD E |
0.20 0.20 |
< =1.7 < =1.7 |
0, l to 0, 80 0, l to 0.80 |
0, 035 0, 030 |
0, 035 0, 030 |
|
E690 |
DD E |
0.20 0.20 |
< =1.7 < =1.7 |
0, l to 0, 80 0, l to 0.80 |
0, 035 0, 030 |
0, 035 0, 030 |
|
1) At least one of these grain-refining elements shall be present or aluminium shall be added. In this case, the minimum total aluminium content shall be 0, 020 % ( d m ). 2) When there is no stress-relieving treatment, a maximum content of 0.20 % ( d m ) is permitted. |
Grade | Quality |
Specified yield strength (RpD, 2) I min. N/m m2? ) |
Rln N/m m2 |
A21 min. % |
KV 3 min. J |
||
e< = 50 | 50< e< 70 | -20degree | -50degree | ||||
E460 |
DD E |
460 460 |
440 440 |
570 to 720 570 to 720 |
17 17 |
39 | 27 |
E550 |
DD E |
550 550 |
530 530 |
650 to 830 650 to 830 |
16 16 |
39 | 27 |
E690 |
DD E |
690 690 |
670 670 |
770to940 770to940 |
14 14 |
39 | 27 |
RPo, *: 0.2 % proof stress; R,: tensile strength; A: percentage elongation after fracture on original gauge length L, = 5, 65& (where So is the original cross-sectional area); KV: impact strength of IS0 V-notch test pieces; e: thickness of test piece, in millimetres. 1) 1 N/mm2 = 1 MPa 2) The use of a test piece 200 mm long, elongation being measured on a gauge length of 50 mm across the fracture, is permitted. However, in cases of dispute, only those results obtained on a proportional test piece shall be used. 3) Average of three tests; no individual result shall be less than 70 % of the specified minimum average value. |