High accuracy portable multiparameter meter includes 8 measurement modes, the meter is suitable for measuring the pH, ORP, Ion concentration, Conductivity, TDS, Salinity, Resistivity and Dissolved Oxygen of the liquids.
Bante900P Portable pH/Conductivity/DO Meter - Features:
pH Mode:
* High accuracy portable multiparameter meter is equipped with a large backlit LCD display.
* 1 to 5 points push-button calibration with auto-buffer recognition.
* Selectable pH buffer standards (USA/NIST/DIN) or using the custom calibration solutions.
* Automatic electrode slope display helps user decide whether to replace sensor.
ORP Mode:
* Single point offset calibration allows adjusting the displayed value to a known standard.
* Relative and absolute millivolt measurement modes provide accurate ORP readings.
Ion Mode:
* 2 to 5 points calibration including the eight concentration calibration points can be selected.
* Automatically recognize ion selective electrodes, does not need to specify type of ion.
* Direct ion concentration readout simplifies the elaborate measurement process.
* Selectable multiple concentration units including the ppm, mg/L and mol/L.
Conductivity/TDS/Salinity/Resistivity Mode:
* 1 to 5 points push-button calibration with automatic calibration solution recognition.
* Selectable cell constants (0.1/1/10), normalization temperatures (20/25°C), TDS conversion factors, seawater and practical salinity measurement modes.
Dissolved Oxygen Mode:
* 1 or 2 points calibration using air-saturated water and zero oxygen solution.
* Manual salinity and barometric pressure compensation improve the measurement accuracy.
Other Features:
* Automatic Temperature Compensation provides accurate reading over the entire range.
* Calibration Due Reminder prompts user to calibrate the meter regularly.
* Stability indicator automatically shows current measurement status.
* Auto-Hold function freezes stable measured value for easy viewing and recording.
* Manual temperature calibration corrects temperature deviation.
* Selectable temperature unit (°C or °F) meets different application requirements.
* Automatic electrode diagnosis shows zero point offset and slope of the electrode.
* Help message as a operational guide that helps you quickly begin using the meter.
* System menu allows setting the 15 parameters, including the calibration points, resolutions, stability conditions, measurement units, etc.
* Reset feature automatically resumes all parameters back to factory default options.
* Expanded memory stores and recalls up to 500 readings.
* Built-in real-time clock stamps stored data to meet GLP standard.
* Stored data can be transferred into computer by USB communication interface.
* Multi-mode power scheme (battery, power adapter, computer's USB port) ensures that use the meter smoothly.
Bante900P Portable pH/Conductivity/DO Meter - Specifications:
pH:
* Range: -2.000~20.000pH
* Accuracy: ±0.002pH
* Resolution: 0.1, 0.01, 0.001pH
* Calibration Points: 1 to 5 points, USA, NIST, DIN Standards
* Temperature Compensation: 0~100°C, 32~212°F, Manual or Automatic
mV:
* Range: -1999.9~1999.9mV
* Accuracy: ±0.2mV
* Resolution: 0.1, 1mV
* Calibration Points: 1 point (Only for Relative mV mode)
* Calibration Range: ±200mV
Ion:
* Range: 0.001~19999ppm, mg/L, mol/L (Depending on range of ISE)
* Accuracy: ±0.5% F.S (Monovalent), ±1% F.S (Divalent)
* Resolution: 0.001, 0.01, 0.1, 1
* Calibration Points: 2 to 5 points
* Calibration Solutions: 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm, mol/L, mg/L
Conductivity:
* Range: 0~20.00, 200.0, 2000µS/cm, 20.00, 200.0mS/cm
* Accuracy: ±0.5% F.S
* Calibration Points: 1 to 5 points
* Calibration Solutions: 10µS/cm, 84µS/cm, 1413µS/cm, 12.88mS/cm, 111.8mS/cm
* Temperature Compensation: 0~100°C, 32~212°F, Manual or Automatic
* Temperature Coefficient: 0.0~10.0%/°C
* Compensation Modes: Linear or Pure Water
* Cell Constant: K=0.1, 1, 10
* Normalization Temperature: 20 or 25°C
TDS:
* Range: 0~10ppt (Max. 20ppt, depending on factor setting)
* Accuracy: ±1% F.S
* TDS Factor: 0.1~1.0 (Default 0.5)
Salinity:
* Range: 0~10ppt (Max. 80ppt)
* Accuracy: ±1% F.S
* Measurement Modes: Seawater or Practical Salinity
Resistivity:
* Range: 0~100MΩ
* Accuracy: ±1% F.S
* Resolution: 0.01, 0.1, 1
Dissolved Oxygen:
* Range: 0.00~20.00mg/L (or ppm)
* Accuracy: ±0.2mg/L
* Resolution: 0.01mg/L
* Calibration Points: 1 or 2 points
* Temperature Compensation: 0~50°C, 32~122°F
* Pressure Correction: 60.0~112.5kPa, 450~850mmHg
* Salinity Correction: 0~50g/L
% Saturation of Oxygen:
* Range: 0.0~200.0%
* Accuracy: ±2.0%
* Resolution: 0.1%
Temperature:
* Range: 0~105°C, 32~221°F
* Accuracy: ±0.5°C, ±0.9°F
* Resolution: 0.1°C
* Calibration Points: 1 point
* Calibration Range: Measured value ±10°C
Others:
* Hold Function: Manual or Automatic
* Stability Conditions: Low or High
* Calibration Due: 0 to 31 days
* Power Off: Manual or Automatic (10, 20, 30 minutes)
* Reset Function: Yes
* Memory: Stores up to 500 data sets
* Output: USB Communication Interface
* Power Requirements: 3×1.5V "AA" Batteries
* Dimensions: 170(L)×85(W)×30(H)mm
* Weight: 300g
Bante Instruments - Professional manufacturer for portable pH/conductivity/DO meter
Bante Instruments Limited was established in 1992, we are professional manufacturer for electrochemical and physical optics instruments.
Since its inception, Bante Instruments devoted to improving the performance and accuracy of each product. R&D team follows scientific and technological progress, constantly applied the latest technology to design and manufacture precise and reliable laboratory equipments. Meanwhile, integrated design and unique style not only make Bante's product with good operability, but also easy maintenance. Well-designed products and processes fully meet customer requirements.
Based on many years of experience in manufacturing, Bante Instruments provides wide range of Water Quality Meters and Lab Equipments for your choice. These products include pH, Oxidation Reduction Potential (ORP), Ion concentration, Conductivity, Total Dissolved Solids, Salinity, Resistivity, Dissolved Oxygen meters and Magnetic stirrers, Polarimeters etc. These laboratory instruments not only with excellent performance, but also easy to use, it will effective simplify your daily work and promote the efficiency.
During the measuring process, if you have any question or experience difficulties, our service engineer will ready to help. Please contact us at anytime, we will do our best to provide technical support for you.
In the past years, Bante Instruments had became an excellent supplier and partner. Via unremitting efforts, our products have already sold to 25 countries, such as USA, Canada, Brazil, Germany, Italy, Malaysia, Korea, etc. User-oriented, constant innovation, Bante Instruments look forward to deliver the better high quality products and services to you.
