Battery Safety Performance Laboratory (Xm-DC001)

Product Specifications

Product Description

Application of a simple introduction of the XM-DC001 battery safety performance laboratory scope: XM-DC001 battery safety performance overall safety performance testing laboratory is the main battery performancesubjected to external damage when, can test and mechanical test of battery electric. The safety performance ofbattery is the main characteristics of the Gao Xin laboratory synthesis such as UL, EIC, UN, GB, QC, YD and other standards, is the operator in the safety testing of space distance, at the same time a number ofperformance testing, to ensure the reliability of operation. Description of product safety performance of XM-DC001 battery integrated laboratory product name: safety performance of XM-DC001 battery in laboratory

Product type: XM-DC001 this machine is the main safety performance test battery performance subjected toexternal damage when, can test and mechanical test of battery electric. This machine is the exclusive launch ofGao Xin, has been widely used in the Pearl River Delta, Tianjin, Zhejiang, the United States of certification bodies and laboratories battery manufacturers and popular acclaim. This machine is the main characteristics ofthe UL, EIC, UN, GB, QC, YD and other standards, the safety performance of XM-DC001 battery in thelaboratory to test the overall space, distance at the same time a number of performance testing, to ensure the reliability of operation. The electrical test of battery short circuit (including normal temperature and high temperature short circuit), internal short circuit, overcharge and over discharge, forced discharge test. Physical property test including extrusion (PLC), acupuncture, the weight (impact), vibration, impact, collision free droptest, air transport. The safety performance of XM-DC001 battery of laboratory temperature controller is set up inside battery external short circuit test box, the shock box, battery thermal battery fuel cell load testing machine, impact testing machine (impact), battery tester, battery press acupuncture testing machine, batterydrop test machine and other test equipment.

The following parameters test equipment the machine: the machine extrusion test battery (PLC): analog cell / battery by the external force of extrusion, the main principle is that the battery is squeezed in two levels, theextrusion pressure of approx. 13kN hydraulic arm, extrusion hydraulic device to the pressure gauge readingreached 2500 (17.2Mpa), once the maximum pressure on the lifting of the extrusion. The extrusion pressure,time, units of measurement can be adjusted freely, reliable performance. The machine can process video, and permanent preservation of data. Technical parameters: 1 power transmission: hydraulic drive (or according to the special requirements for motor drive) 2 of the maximum pressure range: 20kN (2T, commonly used is in the range of 0-13kN) 3 shows pressure accuracy: + / - 10.0kg, resolution: 1/100004. unit conversion: kg/N/Lb5. compression space: 300 * 300 * 300mm (or according to the detected battery adjust the size of the compression space: 6) the extrusion direction from top to bottom: 7 box structure of the safe door is provided with a double visual explosion-proof glass observation window, rear side of the box body is equipped with an exhaust fan. 8 control modes: PLC control 9 input methods: touch screen input and output pin prick test the battery: Simulation of batteries or battery internal short circuit when the situation. Acupuncture needle size,velocity and pressure adjustable fixture battery.

Technical parameters: 1 acupuncture speed: 10 40mm/s speed, through from the perpendicular to the direction of the battery plate (needle retention in the battery) 2 maximum penetration: customized according to test requirements (usually 200kg or 2T) 3 power display: pressure sensor LED display or touch screen display 4 lines of range: 200mm according to the measured cell size or design of the 5 driving modes: cylinder to drive the 6 clamping mode: manual clamping and pneumatic clamp 7 tungsten steel needle: diameter of 2-8mm or specify the battery (impact) impact test: simulated batteries or battery by the battery impact. Remote control,safe and reliable, can the whole video and permanent preservation. Technical parameters: weight: 9.1kg and 10kg (for different standards) impact height: 610 mm or 1000mm can be adjusted freely and set (for differentstandards) cross bar: 15.8mm stainless steel bar height accuracy: + 5mm impact: in a specified height free fall of the battery thermal shock test box to simulate the rapid warming: external environment, with temperature programmed function, convenient operation, with a certain heating rate reached the test temperature within the prescribed period of time, and keep a certain time. Technical parameters: inner box size: W400*H400*D450mm(or customized according to customer requirements) temperature range: ~200 DEG C and 300 C ambient temperature; temperature temperature of - 1 DEG C; temperature uniformity is + - 2 DEG; heating time: (5 + 2)C / min (average temperature, heating temperature, nonlinear); 130 C: test time can be set according to the need of testing, temperature to time, time to stop, stop the machine beeps protection device: ultra temperatureprotection, leakage protection, overload protection, the machine temperature control type battery short circuittest box: the simulation of room temperature or high temperature environment, safety performance test batteryin normal temperature or high temperature short circuit and has the function of automatic heat preservation,but also can be used for short circuit at room temperature, thermal shock test. Technical parameters: maximum short circuit current: 1000A or the specified temperature explosion-proof box box size: W400*H400*D450mm (orcustomized according to customer requirements) temperature explosion-proof box temperature range: ~200 DEG C and 300 C at room temperature resistance: 100M ohm apparatus (or according to different standardequipped) test: two 50mm diameter hole, diameter: the use of the environment the temperature of -10 DEG ~100 DEG 10~90% without dew humidity the battery combustion test for safety performance test battery in from outside sources. This machine remote control automatic ignition, automatic control test process. Technical parameters: burner: Bunsen flame application time: 0~ 999.9s + 0.1s test hole surface straight