Product Description
For Glass (mm)
Grade
Part Code
12-16
Duplex 2205
Best G11-1
Material: Stainless steel Duplex 2205
Finish: Satin Finish or mirror Finish
Glass Thickness: 12, 14 or 16mm
Due to the number of varying mounting conditions, anchors and mounting screws are not supplied.
Frameless Glass Pool Fencing DIY Guide
Duplex stainless steel 2205 provides pitting and crevice corrosion resistance superior to 316L or 317L austenitic stainless steels in almost all corrosive media. It also has high corrosion and erosion fatigue properties as well as lower thermal expansion and higher thermal conductivity than austenitic.
The yield strength is about twice that of austenitic stainless steels.
More details about Duplex stainless steel 2205
Characteristic
Polished by hand to a mirror finish to assist in making a quality part. In the passivation process after buffing, acid and rinsing remove surface contaminants from the products and produce a hydrous oxide film which enhances corrosion resistance. Every production shipment tested and certified
Best Metal Manufacturing LTD is the Industry Leader in Quality stainless steel hardware for over 11 years .We are founded with a mission of being an industry leader, providing quality products and giving excellent customer service. We have talented engineers ready to help with your design needs. We have a modern CNC machine shop and best stainless is ground, buffed and polished by hand to a mirror finish to assist in making a quality part. In the passivation process after buffing, acid and rinsing remove surface contaminants from the products and produce a hydrous oxide film which enhances corrosion resistance. Every production shipment tested and certified.
Our stainless steel products based on tests done to the ASTM B117 method suggest a Duplex 2205 type part could be expected to pass a 120 hour test using a 3% salt spray,316 type part could be expected to pass a 96 hour test using a 3% salt spray. In contrast, 304 type parts would not be expected to give satisfactory results in a 3% salt spray, but if the salt solution concentration is reduced to 0.3 %, then it is possible that a 304 type parts may be satisfactory for test times up to 120 hours.
We are constantly working on improving production procedures, flexibility, and efficiency and we strongly believe in our mission and to take accountability in all our dealings with everyone in all ramifications for a better tomorrow.
You are welcome to our field.
