Product Specifications
| Prod Model: |
ANSB-450 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Equipment Spec: |
8650(L)×5360(W)×4950(H)Mm |
| Car Type: |
Double-Decker Bus, Bus and Other Box Vehicle |
| Max Wash Size(Mm): |
4200(H)* 2600(W) |
| Water Consumption: |
150 L/Car(Normal Coach) |
| Wash Speed: |
40-80cars/H(Normal Coach) |
| Fuel: |
Electric |
| Certification: |
CE |
| Material: |
Metal |
| Condition: |
New |
Product Description
Stationary Bus Washer
ANSB-350/450 large-channel-type bus wash is design for bus and coach The bus is driven into the machine and through it slowly. Four groups of brush are washing the front, rear and both sides of the bus separately. The bus driver should take concerted action with the machine when it is washing. This fast bus washer can wash continuous and rapid which can wash up to 80 buses per hour. It is automatic, space saving and effective which is widely used in public transportation system.
Features:
1. Components are imported from abroad which is superior performance and high reliable;
2. Special soft brush can protect the paint of bus and hurtless
3. Washing quantity is large and up to 80 buses per hour;
4. Water consumption is low and easy to operate
5. Sewage treatment system is optional and can meet the urban environmental requirements.
Application:
The model is mainly used in large bus station. With an average speed of 80 buses per hour and two or three parallel installation, it can meet the needs of a bus station whose parking capacity is around 1000.
Specifications:
|
Type |
ANSB –350 |
ANSB-450 |
|
Equipment Spec(mm) |
8650(L)×5360(W)×4212(H) |
8650(L)×5360(W)×4950(H) |
|
Car type |
Coach, bus and other box vehicle |
Double-decker bus, bus and other box vehicle |
|
Max wash size(mm) |
3500(H)* 2600(W) |
4200(H)* 2600(W) |
|
Speed |
40-80cars/h(normal coach) |
40-80cars/h(normal coach) |
|
Water consume |
150 L/car(normal coach) |
150 L/car (normal coach) |
|
Power |
12 KW |
12 KW |
|
Wash mode |
Normal rinsing ,detergent rinsing |
Normal rinsing ,detergent rinsing |
|
Operation mode |
Auto , Manual |
Auto , Manual |
|
Brush |
Italy wearable plaster brush |
Italy wearable plaster brush |
|
Control system |
Japanese Mitsubihi PLC |
Japanese Mitsubihi PLC |
|
Paint |
Galvanization |
Galvanization |
Guangzhou Anisun Automotive Testing Equipment Co., Ltd. was founded in 2003. It is restructured by Chinese American Mr. Oliver Investment and Anisun in 2007, and set up a joint venture company in Guangzhou. We are researching and manufacturing vehicle testing equipment and testing controlling management system. Our main products includes computer wheel alignment, automobile chassis dynamometer, automobile brake tester, axle loading tester, side sliding tester, speedometer tester, suspension vibration tester, torque angle indicator, wheel partial tester, and so on. We are also sales agents for automobile testing equipments: Light detectors, gas analyzers, opacity smoke meters and other equipment.
Our factory is located in Jiangsu province; its area is more than 12000 square meter. It consists raw-materials workshop, finish machining workshop, welding workshop, treatment workshop, painting/baking workshop, assembling workshop, electrical and electronic controlling production workshop, and testing equipment workshop. We have special R& D department with a group of professional and technical staff.
