Chopped Steel Fiber Wool for Break Pad

Product Specifications

Prod Model:	Ys026
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Raw Material:	Low Carbon
Diameter:	0.4-1.0mm
Length:	25-50mm
Tensile Strength:	380-1500MPa
Usage:	Construction
Package:	20kg
Certification 1:	CE ISO9001
Brand:	Yusen
Standard1:	ASTM
Type1:	Low Carbon Hooked Ends Steel Fiber
Function:	Strengthen
Material:	Metal
Certification:	ISO
Expansion Joint Material:	Steel
Type:	Hooked Ends Steel Fibers
Carbon Fiber Carbonization:	Non
Carbon Fiber Cloth Weaving Method:	Wave
Carbon Fiber Cloth Specification:	Kg
Expansion Joint Model:	Steel Fibers
Expansion Joint Type:	Non

Product Description

Chopped steel fiber

1.Chopped steel fiber is made from high quality low carbon steel wire.It is produced through craping,
choping and mixing.This kind of steel fiber is widely used as the brake pad or lining in motocycle,car,
train,air plane,etc.It brakes smooth and steady,good in wear rate,heat dissipation and low noise.
2.Melting Point:1530°C
3.Packing:25kgs/bag
 

Grade Item          Test		D0-160	D1-80	AD1-80	1-80	3L-80	3-60	Q4-80
Sieve Analysis 100g/8min	14#	0-0.5	0-0.5	0-0.5	0-1	0-1	0-1	0-1
	20#	0-2	0-1.0	0-2	0-5	0-5	2-5	1.5-6.0
	40#	2-5	2-12	3-8	5-15	5-25	10-20	12-20
	70#	10-25	14-25	14-20	15-30	10-25	20-30	15-30
	100#	10-20	10-20	10-14	5-25	5-20	10-25	15-25
	Pan	50-75	50-70	60-75	50-65	50-60	25-45	20-48
Bulk Volume ml/g		0.80-1.05	0.80-1.10	0.78-0.85	0.80-1.10	0.80-1.05	0.90-1.10	0.95-1.30
Oil content (%)		≤0.30	≤0.30	≤0.30	≤0.30	≤0.30	≤0.30	≤0.30
Fibre width	Min	0.0127	0.0360	0.0310	0.0318	0.0635	0.0889	0.1410
	Max	0.0381	0.0598	0.0635	0.0635	0.0889	0.1410	0.2072
Chemical Composition     (%)	C             Mn           P               S               Si 0.07-0.12         <1.25         <0.03           <0.03           ≤0.07

2.Usage:
It is widely used in the fields of buildings,road surface,bridges,tunnels,airport road surface,water conservancy projects,military engineering,and all kinds of building products  
Application of  Daye steel fiber: 
A. Tunnel pre-treatment(primary support)
B. Tunnel forming(permanent lining)
C. Slope stabilization
D. Ditch excavation support
E. Industrial floor
F. Precast concrete element
G. Concrete restoration
H. High performance concrete

3.How to use it?
1.invest blender stir about 30 second steel fiber and thick aggregate first, make the steel fiber disperse among the stones, it is unlikely to form the group.
2.Put sand and cement into blender do, stir 30 second 3 and then with water among the mixer rotating again, make the machine stired again.
3.Fen plants left and right sides.

4.Advantage:
 1.Improve refractories performance
 2.Improve refractories longevity
 3.Improve refractories durability
 4.reduce furnace downtime and maintainace cost

5. Packing:
20KG/Carton , 20KG/Bag , or according to your requirement 

Reference example of  Steel Fiber mixing proportion
Areas of application	LBS/Y3	(KG/M3)
Industrial Ground Floor Slabs	20-120	(12-72)
Airport(aprons, taxiways and runways)	20-160	12-95
Dolomite	80	48
Cemetery	25	15
Cement Slurry	40-120	20-72
Military Structure	160-200	95-120
Maritime	40-160	24-36
Highways	50-140	30-78
Bridge Decks	50-160	30-95
Dam and Stabilization	120	72
Commercial and Residential slabs	40-100	24-60
Cement Conduits	100-120	60-72
Cesspools	40	24
Shotcrete	40-60	24-36
Roads	20-25	12-15