Cr Foam Blcok with Skin for Packing

Closed Cell EPDM Foam sheet  or block

1, With the size 1000*2000mm, and thickness always 1-50mm, 
2, Density : 110-150kgs/m3
3, Good Quality with the UV-resistance
4, Competitive prices

Largely Used: 
Mechanical seal, Marine and building industry, Container seal, Industrial control box industry;
Providing excellent air tight and waterproof properties, as well as good UV and ageing resistance and a high level of flexibility across a wide temperature spectrum, EPDM foam rubbers can be  manufactured a numerous engineering, construction and industrial components such as:
Seals, gaskets, washers and belts for machinery

Nos	property	Units	Tech  requirments	Test  Result	Test Method
1	tensile strength	Mpa	/	0.44	GB/T 6344-1996
2	Elongation	%	/	316	GB/T 6344-1996
3	Compression set	%	/	/	GB/T 6669-2001
4	23 Cx72hX25%		/	73.4	/
5	70 CX24hX25%		/	124.1	/
6	Hot air aging (70Cx70h) after		/	/	GB/T3512-2001
7	Tensile Strength rate	%	/	22.7	GB/T 6344-1996
8	Elongation rate of change	%	/	3.5	GB/T 6344-1996
9	Low temperature bend (-40CX24H, 180-degree bend sight)		/	No cracks	ASTM-D1050-2008
10	Heat shrinkage  (90 degrees feeding x1H) after	%	/	0.8	GB/T 3512-2000
11	Density	G/CM3	/	0.13	GB/T 6343-1995

Topsun, the Professional supplier for the Foams for the large used for Construction/Bluiding, Marine, Automotive, Insulation, Packing, Shoes and Footwear, Sport/GYM Production....
 
Any other details, pls connect with us freely, Warmly Welcome and Servcie for you in 24HRS...

www.topsunfoam.com