Product Specifications
| Prod Model: |
DB-WBS2/4/6 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Heating Power: |
1800W |
| Range Of Temperature Control: |
Rt-100oc |
| Fluctuation Of Water Temperature: |
≤0.5oc |
| Type: |
Microtome |
Product Description
Feature:
This product is manufactured by precision machining process with features of resistant to high temperature and resistant to corrosion.
The temperature control device adopts the stability operation amplifier and double integral high precision A/D conversion technology: infrared heating technology.
With magnetic mixing, its thermal balance time is short, the temperature variation is small, evenness is good and the LED display is accurate and obvious.
Uses
This product applies extensively into distill, dry, condense and warm-soil the chemical drugs or biological products.
Models and main parameters:
The water baths are available in two patterns according to the arrangement of the openings (a) single-row and (b) double-row.
| Model | DB-WBS2 | DB-WBS4 | DB-WBS6 |
| Style | 2 holes
(1 rows) | 4 holes
(2 rows) | 6 holes
(2 rows) |
| Heating Power | 500W | 1200W | 1800W |
| Range of Temperature Control | RT-99ºC | RT-100ºC | RT-100ºC |
| Fluctuation of Water Temperature | ±0.5ºC | ≤0.5ºC | ≤0.5ºC |
| Precision of Temperature Control | ≤1ºC | ≤1ºC | ≤1ºC |
CONSTRUCTION:
This product is of water bath type. Its diameter of the maximum opening is 125mm, Each opening is provided with 4 rings and 1 cover. The inner bath is of one - piece sheet copper to be moulded by punching. The outer casing is made of choice sheet steel of high quality to be finished in spray lacquer. The gap between the outer casing and the inner bath is stuffen with glass wool for heat preservation. The heating clement is immersed in water so that rapid heating can be obtained and power consumption economised. Ametal regulat or is also equipped for adjusting the temperature from 37 ºCto 100ºC according to requirements. These are for adjuster's reference only.
OPERATION:
Before operation, add water into the bath. Warm water may be used according to the temperature required in order to shorten the heating time. The green pilot light illuminates the moment the electric circuit is switched on. As the heating process starts, the red pilot light illuminates. The operator should observe whether the temperature indicated by the thermometer rises to the required level. If not and if the red pilot light goes off, then adjust the regulator by turning the screw in clockwise direction. The red pilot light will' then illuminate and the heating process will start functioning again. By turning counter-clockwise, the red pilot light is switched 0ff, and the temperature cools down. If there is only slight difference in the temperature between the required temperature and that in the bath, then slowly turn the screw so as to keep the bath in a thermostatic condition. If an temperature of 100ºC in the bath is required for distillation, then turn the screw to the end. The bath should not be filled with too much water in order to avoid overflowing when in boiling. On the other hand, the water added to the bath must be efficient to cover up the heating tube so as to avoid it to be burnt out and the fusion of the solder.
Debonnie Medical Equipment Co., Ltd provides professional export service for Medical Instruments and Equipments.
We cooperate with the most professional manufacture (with ISO/CE/FDA certificates) and technical teams, providing customized services to meet all kinds requirements for medical equipments and services.
Debonnie----Owns one stop service platform which is Professional, High-efficient, Flexible, convenient, as well as superior quality product, complete service and the most competitive prices, will be your most thoughtful and reliable cooperation partners in China.
