Product Specifications
Product Description
Drying Machine/Drying Equipment-Horizontal Fluidizing Dryer/Drier (XF)
Features:
Fluidizing dryer is also called fluid bed. Through operation and improvement over 30 years, it has play an active part in the fields of pharmaceutical, chemical, foodstuff, gain and so on industries. It consists of air filter, fluid bed, cyclone separator, dust collector, high-speed centrifugal fan, control cabinet and so on. Because of the difference of property from raw material, it is necessary to equip dust remover in accordance with practical needs. It may select cyclone separator and dust collector both or one of them. In general, cyclone separator can be selected if the raw material is larger and the dust collector may be selected if the raw material is light. Moreover, there is pneumatic feeding device for your selection.
The clean and hot air enters into fluid bed through distributor of valve plate. The wet material is fed from the feeder forms the fluid state by hot air. Because of the wide contact between hot air and raw materials, the time of drying is short. The air enters from the front of bed, fluidized in bed for several minutes, and float another side of bed. The machine works in negative pressure.
Drying process of medicines, chemical raw material, foodstuff, grain processing, feed and so on. For example, raw medicine, tablet, Chinese medicine, foodstuff of health protection, drinks, feed, resin, citric acid and other powders. The suitable diameter of raw material is normally 0.1-0.6mm. The most applicable diameter of raw material will be 0.5-3mm.
Notes: The drying capacity is measured based on the primary moisture of crystal of plum is 20% and its final moisture is 5% and the temperature of air inlet is 130 degree. The drying capacity of other raw materials will be based on the practical drying condition. When choose models, please note that: Model A should be matched with cyclone separator and Model B with inside bag dust collector and Model C with cyclone separator and bag dust collector.
Explanation to installation
All equipment should be horizontal and fixed with foundation screw on the ground. All parts should be sealed well.
The fan may be installed outdoor or in the special noise free room. The plan can be adjusted slightly in accordance with the real conditions.
| spec\item | drying capacity kg/h | power of fan | air pressure pa | air amount m 3 /h | Tem. of inlet air(degree) | Max consume J | Form of feeding |
| XF10 | 10-15 | 7.5 | 5.5×10 3 | 1500 | 60-200 | 2.0×10 8 | 1. shape valve 2. pneumatic conveying |
| XF20 | 20-25 | 11 | 5.8×10 3 | 2000 | 60-200 | 2.6×10 8 |
| XF30 | 30-40 | 15 | 7.1×10 3 | 3850 | 60-200 | 5.2×10 8 |
| XF50 | 50-80 | 30 | 8.5×10 3 | 7000 | 60-200 | 1.04×10 9 |
Changzhou Wanji Drying & Granulating Equipment Co., Ltd has been specialized in manufacturing and exporting series of drying machine and has the ability to design, develop new products. It is one of the largest drying equipment manufacturers and key enterprises in China at present.
We try our best to absorb advanced technology and experiences both at home and abroad. We are experienced and professional in developing, designing, manufacturing various equipments with high quality in accordance with the requirements of GMP standard. At the same time, we are also capable of developing the drying, granulating and mixing equipments suitable for ISO 9001: 2000 quality assurance system.
Our company is innovating and developing unceasingly. It has manufactured series of high-tech and economic products with high quality for our clients both at home and abroad. It also has developed varieties of equipments such as drying, granulating, mixing, pulverizing and sieving. We can offer series spare parts and components of our equipments to our clients as well. Besides, our equipments are widely used in pharmaceutical, chemical, foodstuff, mining, light industry, heavy industry and other industries, enjoying high reputation among the customers both at home and abroad. The company has various advanced test instruments, can provide the series of tests for clients.
The company is located at Changzhou, quite near to Shanghai in China and has beautiful scene with convenient transportation. Our company sincerely welcomes clients around the world to visit us, hoping to cooperate with you and establish a long-term business relationship.
