Duplicator Universal Wireless Remote Control for Garage Door Opener

Product Specifications

Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Signal Transmission:	RF Remote Control
Application:	Automatic Doors

Product Description

Various Duplicator universal wireless remote control for garage door opener Replace your old remote 1. Copy face to face 2. Many uses including some car alarms, home alarms, panic buttons garage door, rolling curtain, etc 3. Copies most radio frequency fixed code and learning remote controls 4. Learining face to face in seconds Product Specifications/Features : To prevent lost and replace your old remotes 1. Self learning remote control 2. Many uses including car alarms, home alarms, panic buttons, garage door, rolling curtain, etc. 3. Copies most radio frequency fixed code remote controls 4. Learning face to face in seconds 5. Battery included Chip of fixed code and learning code type: PT2240 PT2260 PT2262 EV1527 FP527 AX5326 PT2262 PT2242 HT600 HT680 HT6207 HT6010 HT6012 HT6014 AX5326-4 SMC5026 SMC5326-3 SMC5326-4 SMC918 SMC918-3 Frequency: 433.92MHz or other  (Please choose proper frequency you need to copy when purchase) Function: 1)      Erase the code Press and hold both of the "lock" and "unlock" button on the remote control at the same time, after 10 seconds, the LED will flash 3 times, then loose the two buttons, the LED turn off which indicates the code is clear. 2) Duplicating Hold the original remote controller by left hand and hold the copy remote controller by right hand, please make sure the 2 remote controllers close up. Press both of the lock buttons of the 2 remote controllers at the same time and hold, the LED flash 3 times 10 seconds late, then fast flashing which indicated the code of the lock button is duplicated by the new remote controller. Then to operate as the above method to duplicate other 3 buttons 3) Resume If you erase the code stored on the copied remote controller incaution, you can resume it by pressing and holding both of the "lock" and "fulgurate" (up) button on the remote controllers at the same time, after 20 seconds, the LED flash 2 times and turn off which indicated the code of the copy remote controller is resumed.