Product Specifications
| Prod Model: |
KingKar2000 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Product Name: |
Engine Carbon Clean Machine |
| Voltage(V): |
Three-Phase 380V/220V (50-60)Hz±10% |
| Max Gas Output (L/H): |
2000 |
| Rated Capacity (kVA): |
6 |
| Working Principle: |
Increasing The Combustion Efficiency of The Existi |
| Flame Temperature: |
800-2000 Adjutable |
| Insulation Protection Grade: |
F |
| Power Supply Protection Grade: |
IP21s |
| Main Effect: |
Cleaning Ternary Catalytic Scour The Exhaust Pipe |
| Certification: |
CE |
| Material: |
Metal |
| Condition: |
New |
| Fuel: |
Water and Electricity |
Product Description
Serious pollution
Carbon is the vehicle's unseen enemy. Overtime carbon, sludge, varnish,
And moisture builds up in the entire fuel supply system. These contaminants
Clog the injectors, decreasing the vehicle's fuel mileage and overall performance.
This leads to higher emissions and more times for the driver to fill up at the pump.
It may also cause numerous problems such as engine malfunction, excessive fuel
Consumption, rough idling and hard cold car starts
Specifications:
Improve fuel economy
Ease cold-starting
Promote a smoother idle
Quicker acceleration
Eco-friendly
Extend engine life
Why we should do engine cleaning?
The fact is that even a one year old car's engine has accumulated carbon deposits, gum,
Varnishes, dirt and other contaminants that build up in the air intake, fuel delivery system, combustion chamber, and exhaust system. Yes, modern engine computers monitor and adjust for some of these changes, but in time, as these systems get further and further from original spec, inevitably, engine efficiency suffers. The way we usually experience this is subtle at first. Perhaps the car is a little harder to start when cold, or the idle is a bit lumpy, or the engine occasionally stalls, or gas mileage begins to edge downward. It is most likely a combination of the above. Left unaided, these symptoms get worse as the miles pile up. Acceleration suffers, power is down generally, and the engine is no longer smooth. A major contributor is incomplete combustion, which means along with the symptoms we notice, is one we frequently don't - increased tailpipe emissions. An inefficient motor pumps significantly larger amounts of Hydrocarbons, Carbon Dioxide, and Carbon Monoxide out the tailpipe. In California, where Smog-Check II, a stringent new smog certification standard, has been adopted, some drivers have been unpleasantly surprised to find their year-old cars need substantial "fixing" in order to be certified.
As a matter of course, contaminated spark plugs are cleaned or replaced and engine computer sensors and functions checked to improve performance and bring tailpipe emissions in line. All well and good. But it stands to reason that maximum performance and fuel economy simply cannot be achieved if problemcausing sludge and deposits are in the fuel delivery system, not to mention the combustion chamber and exhaust system.
These contaminants can be removed in two ways; By a timeconsuming - and costly - teardown or by introducing some cleaning detergent. Here's a rule of thumb. If it's added to the gas tank, it'll do a great job - of cleaning the gas tank. The trouble is, whatever sludge and deposits are dislodged from the tank usually just end up clogging the fuel delivery system, which can be thought of as a series of progressively finer filters on the way to the intake valves. Pack up any of those filters along the way and there are further problems.
Our mission and vision
After clean, the engine can save 20% fuel, and the HC discharge reduce by 76%, co 74%, and the full procedure only need 20 minutes. So the whole proccess is eco-friendly, exhaust emissions reduced, which is benefit to improve our environment
Conclusion
After using our KingKar Oxy-hydrogen Carbon Clean Machine, deposited carbon is cleaned away, exhaust emissions reduced engine efficiency is increased, power and performance are restored, life expectancy is improved and engine emissions are reduced. The accelerator becomes light, horsepower is increased.
Any questions, please contact us directly and warm welcome to our factory! ! !
Clean test data please see the sheet below
|
Items |
KingKar2000 |
Chemical Foam Method |
|
Medium |
Oxy-hydrogen gas |
Chemical addictive |
|
Operation Time |
20-30mins |
60 mins |
|
Operability |
Without disassembling the engine Only connect the inlet pipe |
Need to disassemble the engine by hand . Spend long times and high labor cost |
|
Advantages/disadvantages |
Simple to connect; the engine runs at idle |
Complicated and repetitive ;carbon removal incomplete |
|
Environmental protection |
New energy ,no pollution ,energy saving |
Air pollution, waste water |
|
Cost (Retail) |
Carbon cleaning process |
Chemical foam. Engine oil .engine oil filter |
Yulong Polymer Science & Technology Co., Ltd. Provides green energy solutions. We are specialized in Oxy-Hydrogen Generator, which changes soft water into a clean burning fuel that can be used to replace traditional gas fuels. We offer this safe, clean and pollution-free new source of green energy for mankind. Our development concept is based on creating a cleaner living environment around the world and promoting the use of sustainable energy sources.
Yulong Oxy-hydrogen generator for boiler only consumes water And electricity to create oxy-hydrogen gas which feeds into to the combustion chamber for complete burning. It increases the combustion efficiency of the existing fuel etc. There is no pollution, no harmful gases or other chemical additives.
Our machine content: Oxy-hydrogen generator for boiler, Oxy-hydrogen used in industrial furnace, Oxy-hydrogen used in medical care, industrial And household wastes incinerator, Oxy-hydrogen used in generator, Oxy-hydrogen used in clean coal combustion technology, Oxy-hydrogen used in pharmaceutical industry and etc.
