Earth Rod - Chemical Ground Rod

Product Specifications

Product Description

Ground Rods - Ground rods and pipe electrodes are suitable for use as grounding
electrodes in accordance with ANSI, and are also suitable for use in installation of
lightning protection equipment.
Ground rods are solid copper, solid stainless steel, copper-jacketed steel,
stainless-steel jacketed, galvanized steel, and chemically charged. They are not less
than 1/2 in. diameter and not less than 8 ft long and capable of being driven to a
depth of 8 ft. If other than circular, they have a periphery not less than 1.6 in. and a
minimum thickness of not less than 3/8 in.
Ground rods are marked with the rod length, and manufacturer's name and catalog
number within 12 in. of the top of the rod.
The ground rods of a sectional ground rod kit consisting of two four-foot sections of
ground rods, a driving sleeve, and a ground rod coupling are marked with the
manufacturer's name, catalog number, rod size and length, and "Sectional Ground
Rod" within 12 in. of the top of each rod.
Ground rod couplings are intended for connection of two ground rods and are
suitable for direct burial.
Founded in 1978, Higred Tools continues to provide both innovative and
cost-effective solutions in outside and inside plant hardware for telecommunication
and utility providers. By utilizing the latest technologies in manufacturing, higred tools
outside plant products are constructed for longevity and easy operation. The
expansive outside and inside plant product offering can be grouped into following
categories; Grounding hardware, drill bits, drill machine and cutters.
Higred tools also specialized hardware that are available in many packaging forms
and point of purchase displays.

NOTES:
1,SIZE 5/8 DIA.MAY BE REPLACED BY 9/16" DIA.
2,CLEAN&NICKEL FLASH BEFORE COPPER PLATING
3,HOT DIP GALV.: COATING THICKNESS 0.0039" MIN.
4,MARKING STAMPED SIZES,MANUFACTURER MARK AND TESTING REQUIREMENT AS SHOWN.
5,45°POINT AND 3/32 CHAMFER MAY BE FORMED AFTER COPPER PLATING
6,HOT DIPPED GALVANIZED GROUND ROD MEETS NAME AND ANSI 135.30 REQUIREMENTS.
7,OUR COMPANY CAN PROVIDE VARIOUS GROUND RODS BESIDES THE ABOVE LISTED MODELS. THE 
DIAMETER CAN BE 8MM TO 25MM, THE COPPER THICKNESS CAN BE 0.025MM TO 1.0MM.IT IS UP TO 
CUSTOMER'S REQUIREMENT. 8. UNLESS OTHER SPECIFIED: 
UNIT: INCH (METRIC) 
3PLACE DECIMAL: +/-0.010 +/-5mm 
2PLACE DECIMAL: +/-0.020 +/-5mm 
ANGLES: +/-2 +/-5 
ALL DIMENSIONS ARE BEFORE COATING REMOVE SHARP EDGES AND BURRS DO NOT SCALE DRAWING

Electrolytic lon Ground because of its good corrosion resistance, excellent electrical conductivity 

and unique in design technology, is widely used in communications, power, petrochemical, finance, 

network, electronic, and other important places of the earth works, especially for poor soil conditions , 

construction limited conditions, technical standards for high ground works.

Our Services