Electric Tubular Motor for Curtain

Product Specifications

Prod Model:	S35-8/14
Markets:	North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe
Color:	Black
Port:	Shenzhen
Motor Diameter:	35mm
Torque:	8nm
Output Speed:	14rpm/Min
Voltage:	AC110/220V
Protection Index:	IP44
Running Time:	4min
Length:	480mm
Weight:	1210g
Function:	Driving
Number Of Stator:	Single-Phase
Brand:	Century
Certification:	CE

Product Description

This tubular motor is mainly used for motorized roller blinds/shades/shutters, which is widely used in hotel, villa and fine fitment places. It's operated with a little press on the controller system, as it's easy operation, quiet and steady working, It will replace the manual roller blinds. As it brings great comfort and convenience to people's busy daily life, It's becoming a standard setting.

Specification of tubular motor:
1. Motor Diameter: 35mm
2. Torque: 8N. M
3. Rotation: 14 rpm
4. Rated Voltage: 220V
5. Rated Frequency: 50Hz
6. Rated Power: 95W
7. Protection Index: IP44
8. Net Weight: 1.5KG

Function and characteristic:
1. Leading technology, new design and advanced craft;
2. Mechanical limit switches and adjustable limit switch;
3. Stable performance, low noise;
4. Overheat protection, when the motor temperature is over 80 degree, the motor stops working automatically, works again if temperature return below 70 degree.
Product advantages:
1. Easy installation and operation;
2. Left or right installation is ok;
3. Apllication: Roller blinds, venetian blinds, honeycomb blinds, pleated blinds, shangri-la blinds, muslin blinds, roman blinds, ceiling curtains, awnings, etc.

How to adjusting the limits position?
Upper and lower limit should be set during installation. These are where the awning, blind or roller shutter stop automatically.
1. Make sure the switch is at the "STOP" position before connecting to power.
2. Check that the "UP" and "DOWN" button are corresponding to correct direction. Otherwise, interchange the connections of black and brown wire of the motor.
3. Identify the thumbscrew which set the upper limit. Press and hold the "UP" button. If the blind stops before reaching desired upper position, turn the upper limit thumbscrew to make the blind reach the position. If the blind goes beyond the desired upper position, press "DOWN" to roll the blind to the desired position.
4. Identify the thumbscrew which set the lower limit. Press and hold the "DOWN" button. If the blind stops before reaching desired lower position, turn the lower limit thumbscrew to make the blind reach the position. If the blind goes beyond the desired lower position, press "UP" to roll the blind to the desired position.