Product Specifications
| Prod Model: |
H53-10 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Mix Ratio: |
6:1 |
| Drying Method: |
Air Drying |
| Formation Mechanism: |
Conversion Type |
| Main Raw Material: |
Epoxy |
| Appearance: |
Liquid |
| Certification: |
ISO9001 |
| Level: |
Primer |
| Color: |
Red-Brown, White, Gray etc |
| Components: |
Epoxy Resin,Non-Toxic Aluminium Triphosphate Anti- |
| Method: |
Spray Brush Roller |
Product Description
Intended Uses
As a excellent anti-rust primer without lead and chrome etc heavy mental environmental pollutions, it possesses excellent adhesion to steel or metalloid substrate, flexibility, scratch-resistance,oil-resistance seawater-resistance and chemical resistance.
Product Description
Red-brown, white, gray etc. Consists of amine cured epoxy resin, non-toxic aluminium triphosphate anti-corrosive pigment etc. Two-packages.
Product Information
Volume Solids: 55%
Dry Film Thickness:40-80microns
Theoretical Coverage:130g/(calculated by 50μm dry film)
Practical Coverage:Allow appropriate loss
Application Details
Mix Ratio A:B=6:1(by weight)
Method of Application:
Airless Spray: Recommeded-Tip range:0.43-0.53mm; Total output fluid pressure >17MPa
Brush or Roller: Recommended
Conventional Spray: Adoptable
Thinner X-7
Pot Life 5ºC:12h 25ºC:8h 35ºC:6h
Storage Life One year
Drying Time
(Substrate Temperature 5ºC) Touch Dry ≤6h Hard Dry ≤36h Overcoating Interval:Minimum 24h Maximum 14 days
(Substrate Temperature 23ºC) Touch Dry ≤2h Hard Dry ≤24h Overcoating Interval:Minimum 16h Maximum 14 days
(Substrate Temperature 35ºC) Touch Dry ≤1h Hard Dry ≤16h Overcoating Interval:Minimum 12h Maximum 14 days
Storage and Handlina
Storage : Store in cool and dry conditons
Pack Size A:21Kg in 20 liter container
B:3.5Kg in 4 liter container
Flash Point: Above 23ºC(mixture)
Specific Gravity : Approx 1.45Kg/L
Specification and Surface Preparation
The steel surface:Blast clean to Swedish Standard SIS055900 Sa2.5 or rust-removed manually or with power tool to St4. Shold be clean and dry.
Limitations
The painting condition: it is hard to cure for this paint temperature of substrate during application should be the dew point.when the temperature is below 5ºC,so the above 50C and it should be above 3ºCthan
Safety Precautions
This product should be used in painting area by professional operators.When painting, please refer
to Product Data Sheet and MSDS.Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint.ln order to avoid danger or accident, minimal safety precautions, as follow, should be done:
The paint contains volatile solvent and is flammable.So must keep away from sparks and open flames.No smoking at application site.Effective precautions(such as using explosionproof electrical equipments, no static electricity accumulation or metal collision etc)also should be done so as to
avoid producing sparks.Flash point of paint, mentioned above on Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site.ln order to remove any danger of explosion,must keep the ratio of gas to air is less than 10% ,the minimum explosive limit in generaLTherefore,200m³ of ventilation quantity per 1 Kg solvent(according to the solvent)is necessary.
Protect skin and eyes, and avoid touching with paints(Recommend to wear working clothes, gloves eye protection, face masks, barrier creams and so on).If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner.ln case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas,especially in bad ventilation.
Handle empty containers with care and do not bring about environmental contamination.
NOTICE:If consumers have not taken effective safety precautions(Refer to the specifications), our company will NOT be responsible for any accident.
Jiangsu zhaohui chemical Co., Ltd. (former changzhou zhaohui chemical Co., Ltd. ) was founded in 1995, the company is located in the east suburb of changzhou city beautiful phoenix foothills, near Shanghai-nanjing railway, Shanghai-nanjing expressway hengshan crossing, the traffic is very convenient.
Our company is specializing in the production of high-performance heavy-duty coating factory, since its establishment, the company has been cooperation with domestic authoritative coatings research unit, carefully developed a complete set of advanced heavy-duty coating. Main varieties of chlorinated rubber paint, epoxy paint, polyurethane acrylic coating, high chlorinated polyethylene coating series, series of chlorosulfonated polyethylene coatings, amino series, the series of alkyd paint series, series of phenolic paint, asphalt coating series, high temperature resistant anticorrosive coatings, fire retardant coatings and architectural coatings and so on dozens of series nearly thousand varieties, is widely used in modern fields involved, large industrial and mining enterprises, power generation, chemical, petrochemical, steel and pipes of large mining, smelting, storage tank, equipment, etc.; An important energy industry: Natural gas, oil pipe, oil tank, power transmission and transformation, nuclear power equipment and coal mine, etc. Modern transportation, Bridges, ships, containers, trains and automobiles etc. Emerging of ocean engineering, Marine facilities, coast and the gulf construction and offshore oil drilling platform, etc. The company and have a secondary anti-corrosion insulation construction qualification, for all kinds of power equipment, petrochemical equipment, ships, Bridges, pipelines, oil tank, the gas tank and other steel structure and equipment components and construction of external corrosion protection and decoration construction. Rely on high quality and high quality service by the users of all ages.
Company to "science and technology for this" the introduction of foreign advanced production equipment and testing equipment, coating of distinguished experts and researchers to strengthen scientific research team, vigorously develop new products to adapt to market demand.
Company now has an annual production capacity of 10000 tons of production lines, relying on strict control of raw materials and finished goods inspection, rely on a strong quality assurance system to strengthen the quality of the product. Company is very pay attention to corporate image, establish the enterprise website, equipped with professional customer service staff, truly "customer is god" the service objective. Do product pre-sale and after-sale tracking service to meet customer demand.
In recent years, the company adhere to the sustainable development strategy, vigorously promote scientific and technological innovation and management innovation, supported by technology development, taking the path of a high and new technology enterprise, constantly develop high decoration, high performance, multi-function, low pollution, green environmental protection coating, and other products, a new round of development for the company and achieve the grand goal of company has a first-class and dedicated effort.
