Product Specifications
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| Colour: |
Over 250 Colours for Choice |
| Use: |
Building Coating |
| Main Raw Material: |
Acrylic |
| Method: |
Spray |
| Appearance: |
Liquid |
| Level: |
Finish Coat |
| Certification: |
China National Analytical Center, Guangzhou |
| Substrate: |
Concrete |
Product Description
Exterior Satin Latex Paint is an acrylic based topcoat designed for exterior facade coating. It has exceptional dirt pick-up resistance as it forms a tough hydrophobic film when dry. Exterior Satin Latex Paint is designed as a topcoat for various Gomix coating systems. Exterior Satin Latex Paint is designed for application in the most severe climatic conditions where humidity, temperature and air pollution would cause lesser coatings to fail.
Features
Exterior Satin Latex Paint is water borne coating based on silicone-acrylic polymers and fade resistant pigments with the following properties:
Excellent dirt pick-up resistance
Excellent UV resistance
Excellent weather resistance
Superior coverage rate
Breathable film
Excellent sheen retention
Easy-to-apply
Environmentally friendly
15 years warranty
Recommended For
Aluminum Siding
Fiber Cement
Brick Steel Siding
Concrete/Masonry
Vinyl Siding
Concrete/Masonry
Block Wood
Ferrous Metal
Application
Use product on dry substrates when both air and surface temperatures are above 35° F (2° C). Surface temperatures must remain above 35° F (2° C) for 4 hours after applying.
Stir paint occasionally. Intermix containers of the same product to ensure color and sheen uniformity.
On semi-smooth surfaces, use a high quality 3/8 -1/2" nap roller cover, nylon/polyester brush or an airless sprayer (. 015 -. 021" spray tip, 60 mesh filter). On rough surfaces, use a high quality 3/4-1" nap roller cover.
Typical coverage is 23-27 m2 per gallon depending on surface texture, porosity and application method.
No thinning is usually required. If necessary, thin with up to 1/4 pint (118 ml) of water per U. S. Gallon (3.78L) of paint. However, if using a sprayer, thin with water at a rate of no more than 1/2 pint (236 ml) per gallon.
More than one topcoat may be required for complete hide.
Dry Time
Dries to the touch in 2 hours at 77° F (25° C) and 50% humidity. Allow at least 4 hours of dry time between coats.
Dries to the touch in 4 hours at 35° F (2° C) to 45° F (7° C) and 50% humidity. Allow at least 8 hours of dry time between coats.
On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats.
Longer dry time required in cooler temperatures and in higher humidity.
Darker colors may require additional dry time between coats.
After 2-4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.
Dry paint film is mildew resistant.
Clean Up & Storage
Use soap and water.
Properly dispose of all soiled rags and protect unused product from freezing.
For disposal of unused paint products, please contact your household refuse collection service.
|
Technical Data |
|
|
Vehicle Type |
100% Acrylic Latex |
|
Pigment Type |
Titanium Dioxide |
|
Volume Solids |
30% +/- 2% |
|
Coverage per Gallon at Recommended Film Thickness |
23-27 m2 |
|
Recommended Film Thickness |
– Dry 1.6 mils |
|
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
– Wet 4.0 mils |
|
Dry Time @ 77° F (25° C) @ 50% RH |
– To Touch 2 Hour |
|
(Painted surfaces can be washed after two weeks. High humidity and cool temperatures will result in longer dry, recoat and service times) |
– To Recoat 2 to 4 Hours |
|
Dries By |
Evaporation, Coalescence |
|
Sheen: Satin |
12 to 22 (60º Gloss Meter) |
|
Surface Temperature at Application |
– Min. 50° F (10° C) |
|
– Max 90° F (32° C) |
|
Storage Temperature |
– Min. 40° F(5° C) |
|
– Max 100° F(38° C) |
|
Volatile Organic Compounds (VOC) |
42 grams / liter. 35 lbs / gallon |
|
Weight Per Gallon |
9.6 lbs. (4.4 kg) +/- 0.2 lbs. (91 g) |
Gomix Co., Limited is one of the most well known construction material manufacturers in China. Over past many years, we sell various building material worldwide successfully. GOMIX mainly offer: Tile Adhesive & Grout, Wall Putty & Skim Coat, Textured Coating, Emulsion Paint, Waterproofing Slurry, and Insulation Materials.
GOMIX operates a manufacturing plant with 3 separate sets of production facilities to produce high quality polymer-modified cementitious construction materials. Our plant is equipped with the most up to date machinery and uses the latest European technologies to produce premixed dry mortar systems under the GOMIX brand.
Our company uses raw materials from reliable sources chosen for their reputation for stable and superior quality. Advanced high quality additives are imported from leading international suppliers to ensure consistent performance of all our products. The automated manufacturing plant is computer-controlled to ensure that all important parameters remain tight tolerances during the production process.
GOMIX also operates a stringent in-house quality control system to monitor product quality and ensures that the requirements of relevant standards or specifications are met at all times. Therefore, due to superior performance and consistent quality, our products are widely approved and used by most of the government departments and private developers in the region.
With the plant which is located in Guangzhou which is a logistic hub in South China, thus enabling our products to be distributed and delivered efficiently to any locations in the region with low cost.
GOMIX has a team of chartered engineers and material experts together with extensive laboratory facilities to enable products to be continuously developed through intensive research and a strong understanding of the local application conditions and constraints. Hence, we are able to develop and provide suitable premixed construction materials for wide applications to common structures as well as tailor-made products to suit for customers' special requirements of extraordinary applications in the region for example emulsion paint.
GOMIX has a pool of experienced material specialists, technical staff members and sales engineers to assist customers to select the most appropriate products for their needs. Besides, on-site support on product applications and other technical issues will be provided to ensure customer satisfaction and proper use of the products.
