Product Specifications
| Prod Model: |
SX3017 |
| Markets: |
North America,South America,Eastern Europe,Southeast Asia,Africa,Oceania,Mid East,Eastern Asia,Western Europe |
| ID=50 Mm: |
Od=52 Mm |
| Thickness=1 Mm~20 Mm: |
Color: Grey or Customized |
| Material: |
TPU |
Product Description
Straight corrugated hose
1. Constitute: Corrugated hose is extruded by hard bones and muscles frame and environmental protection material (polyether ester) hard bar.
2. Key size:
Telescopic part of the external wave 2 ~ 4 mm, pitch of wave from 3 to 6 mm; Internal wave 0.5 ~ 1 mm.
Recommended length is 400 mm, 500 mm, 600 mm, 800 mm, 1000 mm, 1200 mm, 1400 mm, 1600 mm, 1800 mm, 2000 mm and 2200 mm, the length tolerance is L+50 0.
3. Characteristics:
Corrugated hose extrusion skeleton is uniform and good toughness, the surface outside pipe is bright, clean and level off, without a scratch, crack, bubble, uneven, Ge nest, lack of glue, delaminating, double skin, NingJin, efflorescence, lack of material defects etc. Affect the appearance and use of performance.
4. Applications:
Widely applied in cable casing, construction drainage, agricultual drainage, irrigation, chemical industry, medicine and ventilation ducts etc.
5. Mark: OEM products are welcome.
|
key word |
TPU straight corrugated hose |
|
Material |
high quality import silicone/EPDM/PVC/TPU/TPV/TPE/PE |
|
Size |
Custom Design will be acceptable, wide size range can be accept |
|
Color |
blue,grey or customized |
|
Adhesive strength, k N/m |
≥1.5 |
|
Brittle temperature ( -50 °C × 4h ) |
No craking |
|
Ozone resistance ,( 50 ± 5 ) mPa ,( 70 ± 2 ) h × ( 40 ± 2 )°C |
No cracks and visible change |
|
Air aging ( 110 °C ×72h ) |
No cracks and visible change, hot air aging test after bending, radius should be less than 80 mm. |
|
Out-of roundness |
The roundness of the telescopic pipe is not greater than 5%, when the test after the bend radius (or repeated bending after 5 times) out of roundness is not greater than 10%. |
|
Toroidal pressure resistant |
When the pipe deformation 2mm in diameter, pressure should not be less than 120N. |
|
Bending radius |
Should be less than 60 mm (bending center to the expansion pipe); bending radius should be less than 80 mm after the hot air aging. |
|
Fire resistance |
Meet the GB 8410-2006 A - 0 mm/min requirement. |
Hebei Ruide Group Sanxing Rubber & Plastic Co., Ltd is located in China's reform and opening-up demonstration county--Qinghe County, Hebei Province. The factory covers an area of 68 acres, the staff of 368 people, including technology research and development staff of 33 people and quality management staff of 28 people. Since it was founded in 1996, the company has passed ISO 9002: 0994, QS 9000 and VDA 6.1, ISO 9001: 2008, ISO/TS 16949: 2009 quality management system certification.
In line with the cooperation concept of honesty and mutual trust, mutual benefit, hope build sincere cooperation with the general merchants, create a better future.
